Load data for .303 Savage + .311 | 130gr | CutEdge ESP Raptor

.303 Savage cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:130 gr
Bullet Diameter:0.311"
Bullet Length:<<locked>>
Case Length (l3):2.014"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:45 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:22"
Max. allowed Pressure:39,160 psi
Recommended Twist Rate:1:15.0

Load data in caliber .303 Savage with .311 | 130gr | CutEdge ESP Raptor bullet and 9 powders. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 22"

PowderChargeFRMaxP%V(0)z
ADI AR 2207<<locked>>88%34,650 psi88%2382 fps99.2%
Alliant AR-Compᴾ<<locked>>100%32,866 psi84%2392 fps96.1%
Alliant Reloder-7<<locked>>86%34,519 psi88%2329 fps96.3%
Hodgdon TrailBossᴾ<<locked>>100%29,515 psi75%1539 fps100%
IMR 4198<<locked>>90%33,823 psi86%2313 fps96.3%
Norma 200<<locked>>90%33,852 psi86%2372 fps96.6%
ReloadSwiss RS 14ᴾ<<locked>>100%28,935 psi74%1575 fps100%
SNPE Vectan BA6 1/2<<locked>>84%35,215 psi90%2182 fps100%
Vihtavuori N120<<locked>>88%34,983 psi89%2352 fps99.8%

Start Load - Barrel Length: 22"

PowderChargeFRMaxP%V(0)z
ADI AR 2207<<locked>>80%26,789 psi68%2195 fps97%
Alliant AR-Comp<<locked>>98%30,951 psi79%2343 fps95.2%
Alliant Reloder-7<<locked>>84%32,126 psi82%2277 fps95.5%
Hodgdon TrailBoss<<locked>>80%21,248 psi54%1368 fps100%
IMR 4198<<locked>>88%31,821 psi81%2267 fps95.6%
Norma 200<<locked>>86%29,805 psi76%2280 fps95.1%
ReloadSwiss RS 14<<locked>>80%20,958 psi54%1401 fps100%
SNPE Vectan BA6 1/2<<locked>>80%31,604 psi81%2116 fps100%
Vihtavuori N120<<locked>>80%27,151 psi69%2175 fps98.3%

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 9 powders for .303 Savage loaded with the .311 | 130gr | CutEdge ESP Raptor. Alliant AR-Comp delivers the highest muzzle velocity at 2,392 fps; across all powders the maximum-charge window runs from 1,539 fps to 2,392 fps. Alliant AR-Comp gives the best case fill at 100 %, and 9 of the 9 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (270 MPa), the top charges use 74–90 %, leaving at least 10 % headroom. The 130.0 gr projectile in 0.311" calls for a 1:15.0 twist; slower twists will usually not stabilise this weight. Alliant AR-Comp, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data