Load data for 9 x 18 (Ultra) + .355 | 75gr | CutEdge HGHP

Recommended Powder(s): Maxam CSB 3

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 75gr \| CutEdge HGHP
Manufacturer SKU:	HGHP 380 75
Bullet Weight:	75gr \| 4.9g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.440" \| 11.2mm
Caliber:	9 x 18 (Ultra) load data
Case Length (l3):	0.705" \| 17.9mm
Cartridge Length (C.O.L.):	0.989" \| 25.1mm
Seated Depth:	0.156" \| 4.0mm
Shank Seated Depth:	0.156" \| 4.0mm
Case Capacity:	12.6 Grains of Water \| 0.82 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	26107 psi \| 1800 bar
LID:	LID_B8532_C1230
Last updated:	2025-01-01

Load data for 78 loads in caliber 9 x 18 (Ultra) with .355 | 75gr | CutEdge HGHP bullet and 39 powders such as Maxam CSB 3. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	81%	23061	88%	**04	97%
ADI APS 350	<<locked>>	77%	23206	89%	**14	100%
ADI APS 450	<<locked>>	78%	21959	84%	**34	100%
ADI AS 30	<<locked>>	86%	22669	87%	**09	100%
ADI AS 50N	<<locked>>	83%	22234	85%	**35	99%
[Accurate No. 2]*	<<locked>>	84%	21727	83%	**93	84%
Accurate Solo 1000	<<locked>>	84%	22263	85%	**06	100%
Accurate Solo 1250	<<locked>>	97%	22916	88%	**75	96%
Alliant BULLSEYE	<<locked>>	84%	23482	90%	**11	91%
[Alliant UNIQUE]*	<<locked>>	96%	21495	82%	**81	88%
Baschieri & Pellagri 100	<<locked>>	90%	23250	89%	**39	99%
Hodgdon Clays	<<locked>>	77%	23148	89%	**30	100%
Hodgdon HP38	<<locked>>	67%	23366	90%	**62	98%
Hodgdon Universal	<<locked>>	90%	23061	88%	**04	97%
[Hodgdon TrailBoss]*	<<locked>>	92%	6773	26%	**7	88%
Lovex S011	<<locked>>	74%	22495	86%	**16	97%
Lovex S020	<<locked>>	89%	22089	85%	**71	91%
Maxam CSB 1	<<locked>>	95%	20088	77%	**99	94%
Maxam CSB 2	<<locked>>	95%	18478	71%	**55	98%
Maxam CSB 3 👍	<<locked>>	94%	23090	88%	**71	99%
Maxam CSB 4	<<locked>>	89%	23003	88%	**55	100%
Maxam CSB 5	<<locked>>	82%	22205	85%	**09	100%
[Ramshot Silhouette]*	<<locked>>	80%	22350	86%	**78	86%
Ramshot Zip	<<locked>>	66%	22046	84%	**45	96%
ReloadSwiss RS 12	<<locked>>	89%	22814	87%	**47	100%
[ReloadSwiss RS 20]*	<<locked>>	95%	19058	73%	**29	88%
Rottweil P 801	<<locked>>	80%	22336	86%	**88	100%
[SNPE Vectan A0]*	<<locked>>	96%	22046	84%	**22	88%
SNPE Vectan BA 9	<<locked>>	86%	22176	85%	**19	93%
SNPE Vectan BA10	<<locked>>	72%	21930	84%	**34	100%
SNPE Vectan BA9 1/2	<<locked>>	93%	23467	90%	**91	96%
[Somchem MP200]*	<<locked>>	89%	22568	86%	**78	87%
Somchem MS200	<<locked>>	92%	22321	86%	**55	90%
Vihtavuori N310	<<locked>>	70%	22002	84%	**80	100%
Vihtavuori N320	<<locked>>	89%	22539	86%	**71	100%
Vihtavuori N32C Tin Star	<<locked>>	97%	13895	53%	**35	100%
Vihtavuori N330	<<locked>>	95%	22568	86%	**21	97%
[Vihtavuori N340]*	<<locked>>	96%	22989	88%	**78	89%
Winchester 231	<<locked>>	74%	22046	84%	**45	96%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	60%	13010	50%	**15	88%
ADI APS 350	<<locked>>	61%	15722	60%	**56	100%
[ADI APS 450]²	<<locked>>	59%	14112	54%	**50	100%
ADI AS 30	<<locked>>	60%	12415	48%	**37	98%
ADI AS 50N	<<locked>>	60%	12749	49%	**63	93%
[Accurate No. 2]*	<<locked>>	79%	18579	71%	**14	80%
Accurate Solo 1000	<<locked>>	63%	13590	52%	**73	95%
[Accurate Solo 1250]*	<<locked>>	61%	9602	37%	**1	80%
[Alliant BULLSEYE]*	<<locked>>	64%	14083	54%	**38	81%
[Alliant UNIQUE]*	<<locked>>	78%	14083	54%	**68	80%
Baschieri & Pellagri 100	<<locked>>	61%	11298	43%	**07	90%
Hodgdon Clays	<<locked>>	61%	15635	60%	**70	100%
Hodgdon HP38	<<locked>>	60%	18695	72%	**57	95%
[Hodgdon Universal]*	<<locked>>	60%	11327	43%	**43	85%
[Hodgdon TrailBoss]*	<<locked>>	69%	5062	19%	**6	81%
Lovex S011	<<locked>>	60%	14823	57%	**19	91%
[Lovex S020]*	<<locked>>	67%	12096	46%	**83	80%
[Maxam CSB 1]*	<<locked>>	62%	9340	36%	**5	80%
[Maxam CSB 2]*	<<locked>>	60%	8166	31%	**5	84%
[Maxam CSB 3]*	<<locked>>	60%	10515	40%	**01	88%
Maxam CSB 4	<<locked>>	61%	11879	45%	**50	94%
Maxam CSB 5	<<locked>>	60%	13053	50%	**83	100%
[Ramshot Silhouette]*	<<locked>>	71%	17216	66%	**43	80%
Ramshot Zip	<<locked>>	62%	19174	73%	**76	95%
ReloadSwiss RS 12	<<locked>>	61%	10298	39%	**83	93%
[ReloadSwiss RS 20]*	<<locked>>	81%	13779	53%	**52	80%
Rottweil P 801	<<locked>>	61%	12966	50%	**52	99%
[SNPE Vectan A0]*	<<locked>>	78%	14852	57%	**22	80%
[SNPE Vectan BA 9]*	<<locked>>	61%	11806	45%	**17	81%
SNPE Vectan BA10	<<locked>>	62%	16911	65%	**22	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	60%	10617	41%	**01	82%
[Somchem MP200]*	<<locked>>	76%	16360	63%	**14	81%
[Somchem MS200]*	<<locked>>	71%	13779	53%	**12	81%
Vihtavuori N310	<<locked>>	60%	16331	63%	**61	100%
Vihtavuori N320	<<locked>>	62%	11110	43%	**60	93%
Vihtavuori N32C Tin Star	<<locked>>	62%	6875	26%	**0	94%
[Vihtavuori N330]*	<<locked>>	62%	9906	38%	**07	82%
[Vihtavuori N340]*	<<locked>>	79%	14736	56%	**65	81%
Winchester 231	<<locked>>	61%	15519	59%	**71	92%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.