Load data for 8 x 57 R 360 + .318 | 196gr | Sellier & Bellot SP

8 x 57 R 360 cartridge drawing
Sellier & Bellot logo

Load Specifications

Bullet Manufacturer:Sellier & Bellot
Bullet Weight:196 gr
Bullet Diameter:0.318"
Bullet Length:<<locked>>
Case Length (l3):2.23"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:51.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:35,534 psi
Recommended Twist Rate:1:6.0

Load data in caliber 8 x 57 R 360 with .318 | 196gr | Sellier & Bellot SP bullet and 11 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>84%30,284 psi85%2080 fps99.4%
Accurate 4064<<locked>>86%30,458 psi86%2100 fps97.5%
Hodgdon TrailBoss<<locked>>96%31,662 psi89%1388 fps100%
IMR 3031<<locked>>82%31,908 psi90%2136 fps99%
Lovex D073.6<<locked>>82%30,864 psi87%2096 fps96.3%
ReloadSwiss RS 14<<locked>>96%31,894 psi90%1421 fps100%
Shooters World Match Rifle<<locked>>82%30,864 psi87%2096 fps96.3%
SNPE Vectan Tubal 5000<<locked>>86%31,850 psi90%2034 fps98.2%
Vihtavuori N135<<locked>>84%31,314 psi88%2087 fps99.4%
Vihtavuori N140<<locked>>82%30,705 psi86%2047 fps97.3%
Vihtavuori N540<<locked>>84%31,256 psi88%2073 fps96.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>80%26,600 psi75%1995 fps98.5%
Accurate 4064<<locked>>80%25,222 psi71%1972 fps95.3%
Hodgdon TrailBoss11.2 gr80%24,889 psi70%1263 fps100%
IMR 3031<<locked>>80%29,950 psi84%2093 fps98.5%
Lovex D073.6<<locked>>80%28,747 psi81%2047 fps95.5%
ReloadSwiss RS 1411.4 gr80%24,903 psi70%1296 fps100%
Shooters World Match Rifle<<locked>>80%28,747 psi81%2047 fps95.5%
SNPE Vectan Tubal 5000<<locked>>80%26,469 psi74%1909 fps96.3%
Vihtavuori N135<<locked>>80%27,528 psi77%2005 fps98.6%
Vihtavuori N140<<locked>>80%28,892 psi81%2008 fps96.7%
Vihtavuori N540<<locked>>80%27,499 psi77%1988 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

This overview compares 11 powders for 8 x 57 R 360 loaded with the .318 | 196gr | Sellier & Bellot SP. IMR 3031 delivers the highest muzzle velocity at 2,136 fps; across all powders the maximum-charge window runs from 1,388 fps to 2,136 fps. Hodgdon TrailBoss gives the best case fill at 96 %, and 11 of the 11 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (245 MPa), the top charges use 85–90 %, leaving at least 10 % headroom. The 196.0 gr projectile in 0.318" calls for a 1:6.0 twist; slower twists will usually not stabilise this weight. ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for 8 x 57 R 360 with the .318 | 196gr | Sellier & Bellot SP they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data