Load data for 7 x 72 R + .284 | 130gr | CutEdge MTH

7 x 72 R cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:130 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):2.831"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:54 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:40,611 psi
Recommended Twist Rate:1:10.5

Load data in caliber 7 x 72 R with .284 | 130gr | CutEdge MTH bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 60, Accurate 4064 and SNPE Vectan Tubal 5000.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>86%34,577 psi85%2530 fps99.9%
Accurate 4064<<locked>>88%34,766 psi86%2556 fps98.7%
Alliant AR-Comp<<locked>>82%35,621 psi88%2566 fps100%
Bofors RP3<<locked>>90%36,332 psi89%2595 fps96.2%
Hodgdon BL-C2<<locked>>82%35,143 psi87%2559 fps96.7%
Hodgdon TrailBossᴾ<<locked>>100%33,866 psi83%1706 fps100%
IMR 3031<<locked>>84%36,332 psi89%2605 fps99.7%
Lovex D073.6<<locked>>84%35,360 psi87%2559 fps97.9%
Lovex S062<<locked>>86%35,157 psi87%2520 fps96.1%
Norma 201<<locked>>84%36,651 psi90%2539 fps96.5%
Norma 202<<locked>>84%36,709 psi90%2559 fps98.7%
ReloadSwiss RS 14ᴾ<<locked>>100%33,721 psi83%1742 fps100%
ReloadSwiss RS 60<<locked>>90%35,012 psi86%2618 fps97%
Rottweil R 902<<locked>>84%34,780 psi86%2487 fps95.8%
Shooters World Match Rifle<<locked>>84%35,360 psi87%2559 fps97.9%
Shooters World Precision<<locked>>86%35,157 psi87%2520 fps96.1%
SNPE Vectan Tubal 3000<<locked>>82%36,738 psi90%2474 fps98.6%
SNPE Vectan Tubal 5000<<locked>>88%35,969 psi89%2474 fps99.2%
Somchem S335<<locked>>82%35,853 psi88%2474 fps99.1%
Somchem S365ᴾ<<locked>>100%34,882 psi86%2615 fps96.1%
Vihtavuori N133<<locked>>82%36,709 psi90%2484 fps99.9%
Vihtavuori N135<<locked>>86%35,766 psi88%2543 fps99.9%
Vihtavuori N140<<locked>>84%34,708 psi85%2493 fps98.5%
Vihtavuori N150<<locked>>92%36,013 psi89%2539 fps96.9%
Vihtavuori N540<<locked>>86%35,723 psi88%2533 fps98.4%
Winchester 748<<locked>>82%35,882 psi88%2579 fps97.2%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>80%28,166 psi69%2379 fps98.9%
Accurate 406433.6 gr80%26,687 psi66%2349 fps96%
Alliant AR-Comp<<locked>>80%33,344 psi82%2516 fps100%
Bofors RP3<<locked>>88%34,084 psi84%2543 fps95.4%
Hodgdon BL-C2<<locked>>80%32,793 psi81%2503 fps95.8%
Hodgdon TrailBoss<<locked>>80%24,990 psi62%1526 fps100%
IMR 3031<<locked>>80%31,908 psi79%2503 fps99%
Lovex D073.6<<locked>>80%30,879 psi76%2451 fps96.4%
Lovex S062<<locked>>84%33,054 psi81%2470 fps95.3%
Norma 201<<locked>>80%32,430 psi80%2438 fps95%
Norma 202<<locked>>80%32,401 psi80%2461 fps97.6%
ReloadSwiss RS 14<<locked>>80%24,976 psi62%1558 fps100%
ReloadSwiss RS 6039.6 gr88%32,808 psi81%2559 fps96%
Rottweil R 902<<locked>>82%32,677 psi80%2438 fps95.1%
Shooters World Match Rifle<<locked>>80%30,879 psi76%2451 fps96.4%
Shooters World Precision<<locked>>84%33,054 psi81%2470 fps95.3%
SNPE Vectan Tubal 3000<<locked>>80%34,476 psi85%2425 fps98.1%
SNPE Vectan Tubal 500032.5 gr80%27,905 psi69%2287 fps97.1%
Somchem S335<<locked>>80%33,750 psi83%2428 fps98.6%
Somchem S365<<locked>>98%32,576 psi80%2556 fps95.1%
Vihtavuori N133<<locked>>80%34,476 psi85%2438 fps99.7%
Vihtavuori N135<<locked>>80%29,370 psi72%2395 fps99.1%
Vihtavuori N140<<locked>>80%30,400 psi75%2392 fps97.3%
Vihtavuori N150<<locked>>88%31,546 psi78%2434 fps95.3%
Vihtavuori N540<<locked>>80%29,312 psi72%2379 fps96.3%
Winchester 748<<locked>>80%33,504 psi83%2523 fps96.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for 7 x 72 R loaded with the .284 | 130gr | CutEdge MTH. ReloadSwiss RS 60 delivers the highest muzzle velocity at 2,618 fps; across all powders the maximum-charge window runs from 1,706 fps to 2,618 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (280 MPa), the top charges use 83–90 %, leaving at least 10 % headroom. The 130.0 gr projectile in 0.284" calls for a 1:10.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14, Somchem S365 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 60, Accurate 4064, SNPE Vectan Tubal 5000 rank at the top here: for 7 x 72 R with the .284 | 130gr | CutEdge MTH they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data