Load data for 7 x 50 R + .284 | 160gr | Swift A-Frame

7 x 50 R cartridge drawing
Swift logo

Load Specifications

Bullet Manufacturer:Swift
Bullet Weight:160 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):1.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:52,939 psi
Recommended Twist Rate:1:11.5

Load data in caliber 7 x 50 R with .284 | 160gr | Swift A-Frame bullet and 44 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are SNPE Vectan SP 10, Hodgdon H335 and ADI AR 2219.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>86%45,658 psi86%2028 fps99.9%
Accurate 2015ᴾ<<locked>>100%43,337 psi82%2073 fps99.5%
Accurate 2460<<locked>>98%44,860 psi85%2113 fps97.6%
Accurate 2495ᴾ<<locked>>100%35,795 psi68%2057 fps98.7%
Accurate 2520ᴾ<<locked>>100%39,276 psi74%2080 fps95.8%
Accurate LT-30<<locked>>92%46,296 psi87%2028 fps98.9%
Accurate LT-32<<locked>>92%46,833 psi88%2031 fps97.3%
ADI AR 2207<<locked>>92%47,805 psi90%2100 fps100%
ADI AR 2219<<locked>>94%46,006 psi87%2139 fps98.8%
Alliant AR-Compᴾ<<locked>>100%40,379 psi76%2100 fps100%
Alliant Reloder-10x<<locked>>98%47,543 psi90%2139 fps100%
Alliant Reloder-7<<locked>>90%46,717 psi88%2070 fps100%
Baschieri & Pellagri 106<<locked>>94%46,673 psi88%2060 fps99.1%
Hodgdon Benchmarkᴾ<<locked>>100%47,152 psi89%2090 fps96.2%
Hodgdon H322ᴾ<<locked>>100%46,006 psi87%2139 fps98.8%
Hodgdon H335<<locked>>94%45,121 psi85%2133 fps97.8%
Hodgdon H4198<<locked>>90%44,831 psi85%2018 fps98.2%
Hodgdon TrailBossᴾ<<locked>>100%31,488 psi59%1243 fps100%
IMR 3031ᴾ<<locked>>100%34,606 psi65%2011 fps97.2%
IMR 4198<<locked>>96%47,195 psi89%2083 fps100%
IMR 4227<<locked>>84%46,093 psi87%2008 fps100%
Lovex D073.4<<locked>>92%46,267 psi87%2129 fps97.2%
Lovex D073.5<<locked>>98%45,411 psi86%2119 fps96.3%
Lovex S053<<locked>>86%47,123 psi89%1998 fps100%
Norma 200<<locked>>92%44,846 psi85%2090 fps100%
Norma 202ᴾ<<locked>>100%38,972 psi74%2047 fps96.6%
ReloadSwiss RS 14ᴾ<<locked>>100%30,937 psi58%1266 fps100%
ReloadSwiss RS 36<<locked>>86%47,587 psi90%2064 fps100%
ReloadSwiss RS 40<<locked>>98%46,412 psi88%2126 fps97%
Rottweil R 901ᴾ<<locked>>100%43,105 psi81%2077 fps97.3%
Shooters World AR Plus<<locked>>92%46,267 psi87%2129 fps97.2%
SNPE Vectan BA6 1/2<<locked>>88%46,238 psi87%1867 fps100%
SNPE Vectan SP 10<<locked>>94%46,195 psi87%2142 fps98%
SNPE Vectan SP 3<<locked>>96%45,905 psi87%2106 fps99.4%
SNPE Vectan Tubal 3000ᴾ<<locked>>100%43,236 psi82%2021 fps97.2%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%34,635 psi65%1903 fps96%
Somchem S321ᴾ<<locked>>100%46,470 psi88%2152 fps95.8%
Somchem S335ᴾ<<locked>>100%40,886 psi77%2018 fps97.7%
Vihtavuori N120<<locked>>90%45,455 psi86%2034 fps100%
Vihtavuori N130<<locked>>98%45,527 psi86%2060 fps99.9%
Vihtavuori N133ᴾ<<locked>>100%42,192 psi80%2028 fps99.2%
Vihtavuori N135ᴾ<<locked>>100%34,505 psi65%1988 fps98.3%
Vihtavuori N140ᴾ<<locked>>100%37,231 psi70%1995 fps96.2%
Winchester 748ᴾ<<locked>>100%45,600 psi86%2159 fps96.1%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%37,434 psi71%1913 fps99.3%
Accurate 2015<<locked>>84%26,774 psi51%1795 fps95.6%
Accurate 2460<<locked>>92%37,014 psi70%1998 fps95.7%
Accurate 2495<<locked>>90%25,962 psi49%1870 fps95.8%
Accurate 2520<<locked>>98%36,666 psi69%2041 fps95%
Accurate LT-30<<locked>>80%32,372 psi61%1811 fps95.7%
Accurate LT-32<<locked>>86%38,972 psi74%1919 fps95.5%
ADI AR 2207<<locked>>80%33,272 psi63%1900 fps100%
ADI AR 221919.8 gr82%31,256 psi59%1893 fps95%
Alliant AR-Comp<<locked>>80%22,191 psi42%1722 fps95.5%
Alliant Reloder-10x<<locked>>80%27,398 psi52%1811 fps97.1%
Alliant Reloder-7<<locked>>80%34,780 psi66%1896 fps99.3%
Baschieri & Pellagri 106<<locked>>80%30,095 psi57%1801 fps95.3%
Hodgdon Benchmark<<locked>>98%44,164 psi83%2051 fps95.5%
Hodgdon H322<<locked>>88%32,082 psi61%1909 fps95.3%
Hodgdon H33522.4 gr88%36,666 psi69%2001 fps95.7%
Hodgdon H4198<<locked>>80%33,388 psi63%1837 fps95.4%
Hodgdon TrailBoss<<locked>>80%23,047 psi44%1106 fps100%
IMR 3031<<locked>>94%29,182 psi55%1900 fps95.1%
IMR 4198<<locked>>80%30,284 psi57%1818 fps98.6%
IMR 4227<<locked>>80%40,669 psi77%1936 fps100%
Lovex D073.4<<locked>>86%37,536 psi71%2005 fps95.1%
Lovex D073.5<<locked>>96%42,351 psi80%2077 fps95.6%
Lovex S053<<locked>>80%40,045 psi76%1909 fps100%
Norma 200<<locked>>80%31,154 psi59%1877 fps98.9%
Norma 202<<locked>>96%34,563 psi65%1975 fps95.2%
ReloadSwiss RS 14<<locked>>80%22,742 psi43%1132 fps100%
ReloadSwiss RS 36<<locked>>80%39,987 psi76%1965 fps100%
ReloadSwiss RS 40<<locked>>92%38,522 psi73%2011 fps95.1%
Rottweil R 901<<locked>>94%36,405 psi69%1972 fps95.6%
Shooters World AR Plus<<locked>>86%37,536 psi71%2005 fps95.1%
SNPE Vectan BA6 1/2<<locked>>80%37,144 psi70%1759 fps100%
SNPE Vectan SP 1021.5 gr86%35,592 psi67%1978 fps95.4%
SNPE Vectan SP 3<<locked>>80%28,572 psi54%1811 fps95.1%
SNPE Vectan Tubal 3000<<locked>>94%36,158 psi68%1916 fps95.4%
SNPE Vectan Tubal 5000<<locked>>98%32,416 psi61%1864 fps95.3%
Somchem S321<<locked>>98%43,526 psi82%2110 fps95.1%
Somchem S335<<locked>>92%32,372 psi61%1877 fps95.4%
Vihtavuori N120<<locked>>80%33,504 psi63%1870 fps100%
Vihtavuori N130<<locked>>80%26,919 psi51%1755 fps96.5%
Vihtavuori N133<<locked>>84%26,585 psi50%1752 fps95%
Vihtavuori N135<<locked>>90%25,788 psi49%1804 fps95%
Vihtavuori N140<<locked>>98%34,867 psi66%1952 fps95.5%
Winchester 748<<locked>>98%42,757 psi81%2116 fps95.3%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 70 powders for 7 x 50 R loaded with the .284 | 160gr | Swift A-Frame. Alliant Power Pro 1200-R delivers the highest muzzle velocity at 2,192 fps; across all powders the maximum-charge window runs from 1,243 fps to 2,192 fps. Accurate 2015 gives the best case fill at 100 %, and 70 of the 70 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (365 MPa), the top charges use 56–90 %, leaving at least 10 % headroom. The 160.0 gr projectile in 0.284" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2495, Accurate 2520 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. SNPE Vectan SP 10, Hodgdon H335, ADI AR 2219 rank at the top here: for 7 x 50 R with the .284 | 160gr | Swift A-Frame they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 2200, Accurate 2230, Accurate 4064 burn incompletely and react more sensitively to barrel length and temperature. Hodgdon TrailBoss stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data