Load data for 7 x 50 R + .284 | 145gr | Hasler ARIETE

7 x 50 R cartridge drawing
Hasler logo

Load Specifications

Bullet Manufacturer:Hasler
Bullet Weight:145 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):1.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:52,939 psi
Recommended Twist Rate:1:9.0

Load data in caliber 7 x 50 R with .284 | 145gr | Hasler ARIETE bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-7, ADI AR 2207 and Norma 200.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>92%45,876 psi87%2093 fps99.2%
Accurate 2015ᴾ<<locked>>100%33,881 psi64%2001 fps96%
Accurate LT-30<<locked>>98%46,688 psi88%2087 fps97.2%
ADI AR 2205<<locked>>84%47,297 psi89%2011 fps100%
ADI AR 2207<<locked>>98%46,557 psi88%2169 fps100%
ADI AR 2219ᴾ<<locked>>100%45,818 psi87%2188 fps96.8%
Alliant AR-Compᴾ<<locked>>100%32,590 psi62%2021 fps97.8%
Alliant Reloder-10xᴾ<<locked>>100%40,553 psi77%2119 fps98.8%
Alliant Reloder-7<<locked>>96%45,832 psi87%2133 fps99.6%
Baschieri & Pellagri 106ᴾ<<locked>>100%46,833 psi88%2116 fps97.5%
Hodgdon H4198<<locked>>94%45,426 psi86%2080 fps96.4%
Hodgdon TrailBossᴾ<<locked>>100%29,472 psi56%1257 fps100%
IMR 4198ᴾ<<locked>>100%44,454 psi84%2116 fps99.6%
IMR 4227<<locked>>90%46,224 psi87%2080 fps100%
Lovex D060<<locked>>84%47,485 psi90%2116 fps99.8%
Lovex S053<<locked>>92%46,746 psi88%2077 fps100%
Norma 200ᴾ<<locked>>100%45,643 psi86%2182 fps99.7%
ReloadSwiss RS 14ᴾ<<locked>>100%28,674 psi54%1283 fps100%
ReloadSwiss RS 36<<locked>>92%47,558 psi90%2139 fps100%
Shooters World Buffalo Rifle<<locked>>84%47,485 psi90%2116 fps99.8%
Shooters World SOCOM<<locked>>84%47,224 psi89%2090 fps99.9%
SNPE Vectan BA6 1/2<<locked>>94%45,876 psi87%1946 fps100%
SNPE Vectan SP 3ᴾ<<locked>>100%42,293 psi80%2116 fps97.2%
Vihtavuori N110<<locked>>86%46,514 psi88%2005 fps100%
Vihtavuori N120<<locked>>98%46,847 psi88%2133 fps100%
Vihtavuori N130ᴾ<<locked>>100%39,392 psi74%2044 fps98.2%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%30,719 psi58%1857 fps95.9%
Accurate 2015<<locked>>98%31,865 psi60%1965 fps95.4%
Accurate LT-30<<locked>>92%38,609 psi73%1972 fps95.4%
ADI AR 2205<<locked>>80%41,974 psi79%1946 fps100%
ADI AR 220716 gr80%26,542 psi50%1847 fps98.5%
ADI AR 2219<<locked>>96%40,059 psi76%2103 fps95.4%
Alliant AR-Comp<<locked>>94%26,948 psi51%1896 fps95.5%
Alliant Reloder-10x<<locked>>88%27,572 psi52%1886 fps95.2%
Alliant Reloder-716.5 gr80%27,949 psi53%1834 fps95.8%
Baschieri & Pellagri 106<<locked>>92%36,492 psi69%1969 fps95%
Hodgdon H4198<<locked>>90%40,393 psi76%2008 fps95.2%
Hodgdon TrailBoss<<locked>>80%21,654 psi41%1122 fps100%
IMR 4198<<locked>>82%26,484 psi50%1791 fps95.2%
IMR 4227<<locked>>80%33,910 psi64%1900 fps99.1%
Lovex D060<<locked>>80%42,148 psi80%2041 fps99.3%
Lovex S053<<locked>>80%32,996 psi62%1883 fps100%
Norma 20017.1 gr82%25,527 psi48%1834 fps95.2%
ReloadSwiss RS 14<<locked>>80%21,161 psi40%1148 fps100%
ReloadSwiss RS 36<<locked>>80%32,692 psi62%1919 fps98.8%
Shooters World Buffalo Rifle<<locked>>80%42,148 psi80%2041 fps99.3%
Shooters World SOCOM<<locked>>80%41,263 psi78%2011 fps99.5%
SNPE Vectan BA6 1/2<<locked>>80%31,270 psi59%1752 fps100%
SNPE Vectan SP 3<<locked>>94%35,389 psi67%2001 fps95.2%
Vihtavuori N110<<locked>>80%38,943 psi74%1913 fps100%
Vihtavuori N120<<locked>>80%26,919 psi51%1827 fps99.3%
Vihtavuori N130<<locked>>90%29,167 psi55%1867 fps95.3%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for 7 x 50 R loaded with the .284 | 145gr | Hasler ARIETE. ADI AR 2219 delivers the highest muzzle velocity at 2,188 fps; across all powders the maximum-charge window runs from 1,257 fps to 2,188 fps. Accurate 2015 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (365 MPa), the top charges use 54–90 %, leaving at least 10 % headroom. The 145.0 gr projectile in 0.284" calls for a 1:9.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, ADI AR 2219, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-7, ADI AR 2207, Norma 200 rank at the top here: for 7 x 50 R with the .284 | 145gr | Hasler ARIETE they combine a high case fill with complete burn and sit in the upper velocity band. Hodgdon TrailBoss stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data