Load data for 7 x 50 R + .284 | 145gr | CutEdge MTH

7 x 50 R cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:145 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):1.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:52,939 psi
Recommended Twist Rate:1:9.5

Load data in caliber 7 x 50 R with .284 | 145gr | CutEdge MTH bullet and 30 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2207, Norma 200 and Alliant Reloder-7.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>90%45,426 psi86%2116 fps99.4%
Accurate 2015ᴾ<<locked>>100%36,637 psi69%2073 fps97.3%
Accurate LT-30<<locked>>96%45,672 psi86%2106 fps97.5%
ADI AR 2205<<locked>>82%46,296 psi87%2024 fps100%
ADI AR 2207<<locked>>96%46,050 psi87%2188 fps100%
ADI AR 2219<<locked>>98%45,005 psi85%2211 fps97.2%
Alliant AR-Compᴾ<<locked>>100%34,360 psi65%2087 fps98.8%
Alliant Reloder-10xᴾ<<locked>>100%43,091 psi81%2182 fps99.4%
Alliant Reloder-7<<locked>>94%45,818 psi87%2159 fps99.7%
Baschieri & Pellagri 106<<locked>>98%46,456 psi88%2142 fps97.9%
Hodgdon H322ᴾ<<locked>>100%43,120 psi81%2185 fps96.8%
Hodgdon H335ᴾ<<locked>>100%44,092 psi83%2201 fps95.8%
Hodgdon H4198<<locked>>92%45,339 psi86%2110 fps96.9%
Hodgdon TrailBossᴾ<<locked>>100%29,921 psi57%1283 fps100%
IMR 4198ᴾ<<locked>>100%46,267 psi87%2169 fps99.9%
IMR 4227<<locked>>88%45,223 psi85%2096 fps100%
Lovex D060<<locked>>82%46,572 psi88%2133 fps99.8%
Lovex S053<<locked>>90%46,586 psi88%2100 fps100%
Norma 200<<locked>>98%45,585 psi86%2205 fps99.9%
ReloadSwiss RS 14ᴾ<<locked>>100%29,182 psi55%1309 fps100%
ReloadSwiss RS 36<<locked>>90%47,021 psi89%2159 fps100%
Shooters World Buffalo Rifle<<locked>>82%46,572 psi88%2133 fps99.8%
Shooters World SOCOM<<locked>>82%46,557 psi88%2110 fps100%
SNPE Vectan BA6 1/2<<locked>>94%47,892 psi90%1988 fps100%
SNPE Vectan SP 10<<locked>>98%44,788 psi85%2215 fps96.1%
SNPE Vectan SP 3ᴾ<<locked>>100%44,614 psi84%2178 fps98.1%
Vihtavuori N110<<locked>>84%46,108 psi87%2024 fps100%
Vihtavuori N120<<locked>>96%46,325 psi88%2152 fps100%
Vihtavuori N130ᴾ<<locked>>100%41,669 psi79%2106 fps98.9%
Vihtavuori N133ᴾ<<locked>>100%36,172 psi68%2021 fps96.7%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%32,445 psi61%1916 fps97%
Accurate 2015<<locked>>94%30,240 psi57%1959 fps95.3%
Accurate LT-30<<locked>>88%36,027 psi68%1959 fps95.2%
ADI AR 2205<<locked>>80%43,105 psi81%1985 fps100%
ADI AR 220716.8 gr80%27,746 psi52%1893 fps99.1%
ADI AR 2219<<locked>>92%36,985 psi70%2083 fps95.1%
Alliant AR-Comp<<locked>>90%25,266 psi48%1880 fps95.2%
Alliant Reloder-10x<<locked>>84%26,150 psi49%1877 fps95%
Alliant Reloder-717.4 gr80%29,486 psi56%1890 fps96.8%
Baschieri & Pellagri 106<<locked>>90%35,679 psi67%1985 fps95.4%
Hodgdon H322<<locked>>96%38,014 psi72%2100 fps95.4%
Hodgdon H335<<locked>>98%41,147 psi78%2159 fps95.1%
Hodgdon H4198<<locked>>86%37,782 psi71%1995 fps95%
Hodgdon TrailBoss<<locked>>80%21,915 psi41%1145 fps100%
IMR 4198<<locked>>80%26,368 psi50%1814 fps95.7%
IMR 4227<<locked>>80%35,752 psi68%1955 fps99.6%
Lovex D060<<locked>>80%43,410 psi82%2087 fps99.6%
Lovex S053<<locked>>80%34,911 psi66%1936 fps100%
Norma 20017.6 gr80%25,527 psi48%1854 fps95.7%
ReloadSwiss RS 14<<locked>>80%21,437 psi40%1171 fps100%
ReloadSwiss RS 36<<locked>>80%34,360 psi65%1972 fps99.3%
Shooters World Buffalo Rifle<<locked>>80%43,410 psi82%2087 fps99.6%
Shooters World SOCOM<<locked>>80%43,381 psi82%2070 fps99.9%
SNPE Vectan BA6 1/2<<locked>>80%32,866 psi62%1798 fps100%
SNPE Vectan SP 10<<locked>>96%41,800 psi79%2169 fps95.3%
SNPE Vectan SP 3<<locked>>90%33,098 psi63%1988 fps95.1%
Vihtavuori N110<<locked>>80%40,814 psi77%1959 fps100%
Vihtavuori N120<<locked>>80%28,137 psi53%1873 fps99.7%
Vihtavuori N130<<locked>>88%28,747 psi54%1883 fps95.6%
Vihtavuori N133<<locked>>96%32,387 psi61%1952 fps95.5%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 30 powders for 7 x 50 R loaded with the .284 | 145gr | CutEdge MTH. SNPE Vectan SP 10 delivers the highest muzzle velocity at 2,215 fps; across all powders the maximum-charge window runs from 1,283 fps to 2,215 fps. Accurate 2015 gives the best case fill at 100 %, and 30 of the 30 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (365 MPa), the top charges use 55–90 %, leaving at least 10 % headroom. The 145.0 gr projectile in 0.284" calls for a 1:9.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Alliant AR-Comp, Alliant Reloder-10x reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2207, Norma 200, Alliant Reloder-7 rank at the top here: for 7 x 50 R with the .284 | 145gr | CutEdge MTH they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data