Load data for 7 x 50 R + .284 | 132gr | CutEdge Maximus

7 x 50 R cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:132 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):1.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:52,939 psi
Recommended Twist Rate:1:10.5

Load data in caliber 7 x 50 R with .284 | 132gr | CutEdge Maximus bullet and 28 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2207, Norma 200 and ReloadSwiss RS 36.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>92%47,021 psi89%2270 fps99.2%
Accurate 2015ᴾ<<locked>>100%35,056 psi66%2172 fps96.2%
Accurate LT-30<<locked>>98%47,398 psi90%2260 fps97.2%
ADI AR 2205<<locked>>82%45,034 psi85%2142 fps100%
ADI AR 2207<<locked>>96%44,730 psi84%2313 fps100%
ADI AR 2219ᴾ<<locked>>100%47,166 psi89%2375 fps97%
Alliant AR-Compᴾ<<locked>>100%33,402 psi63%2192 fps97.9%
Alliant Reloder-10xᴾ<<locked>>100%41,408 psi78%2293 fps98.8%
Alliant Reloder-7<<locked>>96%47,558 psi90%2320 fps99.6%
Baschieri & Pellagri 106<<locked>>98%45,194 psi85%2257 fps97.1%
Hodgdon H322ᴾ<<locked>>100%42,380 psi80%2303 fps95.8%
Hodgdon H4198<<locked>>94%46,760 psi88%2264 fps96.5%
Hodgdon TrailBossᴾ<<locked>>100%29,385 psi56%1365 fps100%
IMR 4198ᴾ<<locked>>100%45,179 psi85%2293 fps99.6%
IMR 4227<<locked>>90%47,500 psi90%2264 fps100%
Lovex D060<<locked>>82%45,455 psi86%2254 fps99.5%
Lovex S053<<locked>>90%45,585 psi86%2224 fps100%
Norma 200ᴾ<<locked>>100%47,413 psi90%2369 fps99.8%
ReloadSwiss RS 14ᴾ<<locked>>100%29,080 psi55%1401 fps100%
ReloadSwiss RS 36<<locked>>90%46,006 psi87%2283 fps100%
Shooters World Buffalo Rifle<<locked>>82%45,455 psi86%2254 fps99.5%
Shooters World SOCOM<<locked>>82%45,179 psi85%2228 fps99.8%
SNPE Vectan BA6 1/2<<locked>>94%46,601 psi88%2110 fps100%
SNPE Vectan SP 10ᴾ<<locked>>100%46,470 psi88%2372 fps95.7%
SNPE Vectan SP 3ᴾ<<locked>>100%43,569 psi82%2300 fps97.3%
Vihtavuori N110<<locked>>84%45,237 psi85%2149 fps100%
Vihtavuori N120<<locked>>96%45,034 psi85%2277 fps100%
Vihtavuori N130ᴾ<<locked>>100%40,756 psi77%2221 fps98.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%31,517 psi60%2014 fps96%
Accurate 2015<<locked>>98%33,199 psi63%2139 fps95.6%
Accurate LT-30<<locked>>92%39,943 psi75%2149 fps95.5%
ADI AR 2205<<locked>>80%42,670 psi81%2113 fps100%
ADI AR 220717.9 gr80%27,354 psi52%2005 fps98.5%
ADI AR 2219<<locked>>96%41,234 psi78%2283 fps95.5%
Alliant AR-Comp<<locked>>94%27,760 psi52%2060 fps95.6%
Alliant Reloder-10x<<locked>>88%28,456 psi54%2051 fps95.2%
Alliant Reloder-7<<locked>>80%28,921 psi55%1995 fps95.9%
Baschieri & Pellagri 106<<locked>>92%37,014 psi70%2129 fps95%
Hodgdon H322<<locked>>98%39,624 psi75%2257 fps95.1%
Hodgdon H4198<<locked>>90%41,510 psi78%2182 fps95.3%
Hodgdon TrailBoss<<locked>>80%21,393 psi40%1217 fps100%
IMR 4198<<locked>>82%27,282 psi52%1952 fps95.3%
IMR 4227<<locked>>80%34,983 psi66%2070 fps99.1%
Lovex D060<<locked>>80%43,091 psi81%2215 fps99.3%
Lovex S053<<locked>>80%33,750 psi64%2044 fps100%
Norma 20019.2 gr82%26,658 psi50%1998 fps95.4%
ReloadSwiss RS 14<<locked>>80%21,335 psi40%1253 fps100%
ReloadSwiss RS 3618.6 gr80%33,736 psi64%2087 fps98.8%
Shooters World Buffalo Rifle<<locked>>80%43,091 psi81%2215 fps99.3%
Shooters World SOCOM<<locked>>80%42,250 psi80%2185 fps99.5%
SNPE Vectan BA6 1/2<<locked>>80%32,169 psi61%1909 fps100%
SNPE Vectan SP 10<<locked>>98%43,598 psi82%2329 fps95%
SNPE Vectan SP 3<<locked>>94%36,187 psi68%2172 fps95.3%
Vihtavuori N110<<locked>>80%40,292 psi76%2087 fps100%
Vihtavuori N120<<locked>>80%27,717 psi52%1985 fps99.4%
Vihtavuori N130<<locked>>90%29,820 psi56%2024 fps95.2%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 28 powders for 7 x 50 R loaded with the .284 | 132gr | CutEdge Maximus. ADI AR 2219 delivers the highest muzzle velocity at 2,375 fps; across all powders the maximum-charge window runs from 1,365 fps to 2,375 fps. Accurate 2015 gives the best case fill at 100 %, and 28 of the 28 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (365 MPa), the top charges use 55–90 %, leaving at least 10 % headroom. The 132.0 gr projectile in 0.284" calls for a 1:10.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, ADI AR 2219, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2207, Norma 200, ReloadSwiss RS 36 rank at the top here: for 7 x 50 R with the .284 | 132gr | CutEdge Maximus they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data