Load data for 7 x 50 R + .284 | 130gr | CutEdge MTH

7 x 50 R cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:130 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):1.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:52,939 psi
Recommended Twist Rate:1:10.5

Load data in caliber 7 x 50 R with .284 | 130gr | CutEdge MTH bullet and 28 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2207, Norma 200 and Alliant Reloder-7.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>92%47,747 psi90%2306 fps99.3%
Accurate 2015ᴾ<<locked>>100%35,723 psi67%2208 fps96.3%
Accurate LT-30<<locked>>96%45,136 psi85%2254 fps96.8%
ADI AR 2205<<locked>>82%45,542 psi86%2175 fps100%
ADI AR 2207<<locked>>96%45,005 psi85%2343 fps100%
ADI AR 2219ᴾ<<locked>>100%47,065 psi89%2405 fps96.9%
Alliant AR-Compᴾ<<locked>>100%33,431 psi63%2218 fps97.9%
Alliant Reloder-10xᴾ<<locked>>100%42,148 psi80%2333 fps98.8%
Alliant Reloder-7<<locked>>96%47,747 psi90%2349 fps99.6%
Baschieri & Pellagri 106<<locked>>98%45,643 psi86%2290 fps97.2%
Hodgdon H322ᴾ<<locked>>100%42,351 psi80%2329 fps95.8%
Hodgdon H4198<<locked>>94%46,963 psi89%2293 fps96.5%
Hodgdon TrailBossᴾ<<locked>>100%29,689 psi56%1388 fps100%
IMR 4198ᴾ<<locked>>100%45,426 psi86%2323 fps99.6%
IMR 4227<<locked>>90%47,253 psi89%2287 fps100%
Lovex D060<<locked>>82%45,353 psi86%2280 fps99.5%
Lovex S053<<locked>>90%45,411 psi86%2251 fps100%
Norma 200ᴾ<<locked>>100%47,529 psi90%2398 fps99.8%
ReloadSwiss RS 14ᴾ<<locked>>100%29,385 psi56%1424 fps100%
ReloadSwiss RS 36<<locked>>90%46,282 psi87%2316 fps100%
Shooters World Buffalo Rifle<<locked>>82%45,353 psi86%2280 fps99.5%
Shooters World SOCOM<<locked>>82%45,484 psi86%2260 fps99.8%
SNPE Vectan BA6 1/2<<locked>>94%47,166 psi89%2142 fps100%
SNPE Vectan SP 10ᴾ<<locked>>100%46,934 psi89%2408 fps95.8%
SNPE Vectan SP 3ᴾ<<locked>>100%43,729 psi83%2329 fps97.3%
Vihtavuori N110<<locked>>86%47,906 psi90%2211 fps100%
Vihtavuori N120<<locked>>96%45,266 psi86%2306 fps100%
Vihtavuori N130ᴾ<<locked>>100%40,828 psi77%2251 fps98.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%31,836 psi60%2047 fps96%
Accurate 2015<<locked>>98%33,344 psi63%2165 fps95.6%
Accurate LT-30<<locked>>92%40,176 psi76%2178 fps95.6%
ADI AR 2205<<locked>>80%42,641 psi81%2136 fps100%
ADI AR 220718.2 gr80%27,369 psi52%2031 fps98.5%
ADI AR 2219<<locked>>96%41,278 psi78%2313 fps95.5%
Alliant AR-Comp<<locked>>94%27,891 psi53%2087 fps95.6%
Alliant Reloder-10x<<locked>>88%28,747 psi54%2080 fps95.3%
Alliant Reloder-718.8 gr80%28,877 psi55%2018 fps95.8%
Baschieri & Pellagri 106<<locked>>92%37,478 psi71%2162 fps95.1%
Hodgdon H322<<locked>>98%39,697 psi75%2283 fps95%
Hodgdon H4198<<locked>>90%41,756 psi79%2215 fps95.3%
Hodgdon TrailBoss<<locked>>80%21,785 psi41%1240 fps100%
IMR 4198<<locked>>82%27,296 psi52%1975 fps95.2%
IMR 4227<<locked>>80%34,983 psi66%2093 fps99.1%
Lovex D060<<locked>>80%43,062 psi81%2241 fps99.3%
Lovex S053<<locked>>80%34,287 psi65%2077 fps100%
Norma 20019.5 gr82%26,614 psi50%2021 fps95.3%
ReloadSwiss RS 14<<locked>>80%21,277 psi40%1266 fps100%
ReloadSwiss RS 36<<locked>>80%33,692 psi64%2113 fps98.8%
Shooters World Buffalo Rifle<<locked>>80%43,062 psi81%2241 fps99.3%
Shooters World SOCOM<<locked>>80%42,627 psi81%2218 fps99.6%
SNPE Vectan BA6 1/2<<locked>>80%32,358 psi61%1936 fps100%
SNPE Vectan SP 10<<locked>>98%44,005 psi83%2362 fps95.1%
SNPE Vectan SP 3<<locked>>94%36,347 psi69%2201 fps95.3%
Vihtavuori N110<<locked>>80%40,422 psi76%2113 fps100%
Vihtavuori N120<<locked>>80%27,717 psi52%2008 fps99.3%
Vihtavuori N130<<locked>>90%30,095 psi57%2054 fps95.3%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 28 powders for 7 x 50 R loaded with the .284 | 130gr | CutEdge MTH. SNPE Vectan SP 10 delivers the highest muzzle velocity at 2,408 fps; across all powders the maximum-charge window runs from 1,388 fps to 2,408 fps. Accurate 2015 gives the best case fill at 100 %, and 28 of the 28 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (365 MPa), the top charges use 56–90 %, leaving at least 10 % headroom. The 130.0 gr projectile in 0.284" calls for a 1:10.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, ADI AR 2219, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2207, Norma 200, Alliant Reloder-7 rank at the top here: for 7 x 50 R with the .284 | 130gr | CutEdge MTH they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data