Load data for 7 x 50 R + .284 | 130gr | CutEdge ESP Raptor

7 x 50 R cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:130 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):1.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:52,939 psi
Recommended Twist Rate:1:11.0

Load data in caliber 7 x 50 R with .284 | 130gr | CutEdge ESP Raptor bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2207, Norma 200 and Alliant Reloder-7.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>92%46,949 psi89%2293 fps99.2%
Accurate 2015ᴾ<<locked>>100%35,534 psi67%2205 fps96.2%
Accurate LT-30<<locked>>96%44,976 psi85%2247 fps96.7%
ADI AR 2205<<locked>>84%47,790 psi90%2201 fps100%
ADI AR 2207<<locked>>96%44,773 psi85%2339 fps100%
ADI AR 2219ᴾ<<locked>>100%46,963 psi89%2398 fps96.8%
Alliant AR-Compᴾ<<locked>>100%33,359 psi63%2211 fps97.8%
Alliant Reloder-10xᴾ<<locked>>100%41,379 psi78%2316 fps98.7%
Alliant Reloder-7<<locked>>96%47,601 psi90%2346 fps99.6%
Baschieri & Pellagri 106<<locked>>98%44,976 psi85%2277 fps97%
Hodgdon H4198<<locked>>94%46,775 psi88%2287 fps96.5%
Hodgdon TrailBossᴾ<<locked>>100%29,849 psi56%1388 fps100%
IMR 4198ᴾ<<locked>>100%45,223 psi85%2316 fps99.6%
IMR 4227<<locked>>90%47,036 psi89%2280 fps100%
Lovex D060<<locked>>82%45,759 psi86%2280 fps99.5%
Lovex S053<<locked>>90%45,179 psi85%2244 fps100%
Norma 200ᴾ<<locked>>100%47,311 psi89%2395 fps99.7%
ReloadSwiss RS 14ᴾ<<locked>>100%29,037 psi55%1414 fps100%
ReloadSwiss RS 36<<locked>>90%46,050 psi87%2310 fps100%
Shooters World Buffalo Rifle<<locked>>82%45,759 psi86%2280 fps99.5%
Shooters World SOCOM<<locked>>82%45,295 psi86%2254 fps99.8%
SNPE Vectan BA6 1/2<<locked>>94%46,905 psi89%2136 fps100%
SNPE Vectan SP 10ᴾ<<locked>>100%46,804 psi88%2402 fps95.7%
SNPE Vectan SP 3ᴾ<<locked>>100%43,613 psi82%2323 fps97.2%
Vihtavuori N110<<locked>>86%47,659 psi90%2205 fps100%
Vihtavuori N120<<locked>>96%45,078 psi85%2303 fps100%
Vihtavuori N130ᴾ<<locked>>100%40,698 psi77%2244 fps98.2%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%31,691 psi60%2041 fps95.9%
Accurate 2015<<locked>>98%33,170 psi63%2159 fps95.4%
Accurate LT-30<<locked>>92%40,045 psi76%2172 fps95.5%
ADI AR 2205<<locked>>80%42,409 psi80%2129 fps100%
ADI AR 220718.1 gr80%27,180 psi51%2021 fps98.4%
ADI AR 2219<<locked>>96%41,118 psi78%2306 fps95.4%
Alliant AR-Comp<<locked>>94%27,804 psi53%2080 fps95.5%
Alliant Reloder-10x<<locked>>88%28,572 psi54%2073 fps95.1%
Alliant Reloder-718.7 gr80%28,732 psi54%2011 fps95.7%
Baschieri & Pellagri 106<<locked>>92%37,391 psi71%2159 fps95%
Hodgdon H4198<<locked>>90%41,582 psi79%2208 fps95.2%
Hodgdon TrailBoss<<locked>>80%21,451 psi41%1234 fps100%
IMR 4198<<locked>>82%27,137 psi51%1969 fps95.1%
IMR 4227<<locked>>80%34,809 psi66%2087 fps99%
Lovex D060<<locked>>80%42,830 psi81%2238 fps99.2%
Lovex S053<<locked>>80%34,084 psi64%2070 fps100%
Norma 20019.4 gr82%26,455 psi50%2014 fps95.2%
ReloadSwiss RS 14<<locked>>80%21,379 psi40%1270 fps100%
ReloadSwiss RS 36<<locked>>80%33,475 psi63%2103 fps98.7%
Shooters World Buffalo Rifle<<locked>>80%42,830 psi81%2238 fps99.2%
Shooters World SOCOM<<locked>>80%42,438 psi80%2211 fps99.5%
SNPE Vectan BA6 1/2<<locked>>80%32,097 psi61%1929 fps100%
SNPE Vectan SP 10<<locked>>98%43,874 psi83%2356 fps95%
SNPE Vectan SP 3<<locked>>94%36,201 psi68%2195 fps95.2%
Vihtavuori N110<<locked>>80%40,132 psi76%2106 fps100%
Vihtavuori N120<<locked>>80%27,528 psi52%2001 fps99.3%
Vihtavuori N130<<locked>>90%29,936 psi57%2047 fps95.2%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for 7 x 50 R loaded with the .284 | 130gr | CutEdge ESP Raptor. SNPE Vectan SP 10 delivers the highest muzzle velocity at 2,402 fps; across all powders the maximum-charge window runs from 1,388 fps to 2,402 fps. Accurate 2015 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (365 MPa), the top charges use 55–90 %, leaving at least 10 % headroom. The 130.0 gr projectile in 0.284" calls for a 1:11.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, ADI AR 2219, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2207, Norma 200, Alliant Reloder-7 rank at the top here: for 7 x 50 R with the .284 | 130gr | CutEdge ESP Raptor they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data