Load data for 6.8 mm Rem. SPC + .277 | 115gr | Hasler Hunting

6.8 mm Rem. SPC cartridge drawing
Hasler logo

Load Specifications

Bullet Manufacturer:Hasler
Bullet Weight:115 gr
Bullet Diameter:0.277"
Bullet Length:<<locked>>
Case Length (l3):1.69"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:58,740 psi
Recommended Twist Rate:1:10.5

Load data in caliber 6.8 mm Rem. SPC with .277 | 115gr | Hasler Hunting bullet and 45 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Shooters World AR Plus, Lovex D073.4 and SNPE Vectan SP 10.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>88%51,256 psi87%2608 fps100%
Accurate 2015ᴾ<<locked>>100%46,253 psi79%2621 fps99.5%
Accurate 2460ᴾ<<locked>>100%51,938 psi88%2723 fps98.3%
Accurate 2495ᴾ<<locked>>100%34,069 psi58%2484 fps98%
Accurate 2520ᴾ<<locked>>100%44,759 psi76%2654 fps96.7%
Accurate LT-30<<locked>>94%51,793 psi88%2612 fps99.3%
Accurate LT-32<<locked>>94%52,315 psi89%2618 fps97.9%
ADI AR 2207<<locked>>92%50,589 psi86%2654 fps100%
ADI AR 2219<<locked>>96%52,199 psi89%2749 fps99.3%
Alliant AR-Compᴾ<<locked>>100%43,163 psi73%2654 fps100%
Alliant Power Pro 1200-Rᴾ<<locked>>100%52,765 psi90%2825 fps95.9%
Alliant Reloder-10x<<locked>>98%50,705 psi86%2703 fps100%
Alliant Reloder-7<<locked>>92%52,446 psi89%2661 fps100%
Baschieri & Pellagri 106<<locked>>96%53,084 psi90%2648 fps99.5%
Hodgdon Benchmarkᴾ<<locked>>100%49,879 psi85%2638 fps96.4%
Hodgdon H322<<locked>>98%50,067 psi85%2717 fps99%
Hodgdon H335<<locked>>98%51,329 psi87%2740 fps98.5%
Hodgdon H4198<<locked>>90%50,633 psi86%2612 fps98.8%
Hodgdon TrailBossᴾ<<locked>>100%31,198 psi53%1588 fps100%
IMR 3031ᴾ<<locked>>100%40,640 psi69%2621 fps98.3%
IMR 4198<<locked>>98%52,910 psi90%2684 fps100%
IMR 4227<<locked>>86%50,560 psi86%2579 fps100%
Lovex D073.4<<locked>>92%49,574 psi84%2694 fps97.4%
Lovex D073.5ᴾ<<locked>>100%52,214 psi89%2726 fps97.2%
Lovex S053<<locked>>88%52,069 psi89%2572 fps100%
Norma 200<<locked>>94%50,517 psi86%2680 fps100%
Norma 202ᴾ<<locked>>100%41,640 psi71%2585 fps96.7%
ReloadSwiss RS 14ᴾ<<locked>>100%30,908 psi53%1624 fps100%
ReloadSwiss RS 36<<locked>>86%50,502 psi86%2618 fps100%
ReloadSwiss RS 40<<locked>>98%49,647 psi85%2687 fps97.3%
Rottweil R 901ᴾ<<locked>>100%45,237 psi77%2612 fps97.3%
Shooters World AR Plus<<locked>>92%49,574 psi84%2694 fps97.4%
SNPE Vectan BA6 1/2<<locked>>92%53,142 psi90%2431 fps100%
SNPE Vectan SP 10<<locked>>96%52,808 psi90%2756 fps98.6%
SNPE Vectan SP 3<<locked>>98%51,837 psi88%2707 fps99.7%
SNPE Vectan Tubal 3000ᴾ<<locked>>100%45,701 psi78%2552 fps97.3%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%36,405 psi62%2402 fps96.1%
Somchem S321ᴾ<<locked>>100%50,386 psi86%2720 fps96.2%
Somchem S335ᴾ<<locked>>100%43,685 psi74%2549 fps97.9%
Vihtavuori N110<<locked>>82%51,039 psi87%2474 fps100%
Vihtavuori N120<<locked>>92%50,734 psi86%2608 fps100%
Vihtavuori N130ᴾ<<locked>>100%51,547 psi88%2651 fps100%
Vihtavuori N133ᴾ<<locked>>100%44,686 psi76%2559 fps99.3%
Vihtavuori N135ᴾ<<locked>>100%36,622 psi62%2507 fps98.3%
Vihtavuori N140ᴾ<<locked>>100%39,363 psi67%2513 fps96.4%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%39,059 psi66%2415 fps99.2%
Accurate 2015<<locked>>84%27,673 psi47%2247 fps95.1%
Accurate 2460<<locked>>90%36,680 psi62%2467 fps95%
Accurate 2495<<locked>>94%27,615 psi47%2333 fps95.8%
Accurate 2520<<locked>>96%38,682 psi66%2546 fps95.1%
Accurate LT-30<<locked>>80%33,475 psi57%2287 fps95.5%
Accurate LT-32<<locked>>86%40,857 psi70%2431 fps95.5%
ADI AR 2207<<locked>>80%34,476 psi59%2388 fps100%
ADI AR 2219<<locked>>84%34,838 psi59%2438 fps95.7%
Alliant AR-Comp<<locked>>82%24,207 psi41%2205 fps95.9%
Alliant Power Pro 1200-R<<locked>>98%49,400 psi84%2772 fps95.1%
Alliant Reloder-10x<<locked>>80%28,790 psi49%2287 fps96.9%
Alliant Reloder-7<<locked>>80%35,897 psi61%2388 fps99.1%
Baschieri & Pellagri 106<<locked>>80%31,531 psi54%2270 fps95.1%
Hodgdon Benchmark<<locked>>96%44,208 psi75%2546 fps95%
Hodgdon H322<<locked>>86%33,750 psi57%2415 fps95.3%
Hodgdon H335<<locked>>88%36,448 psi62%2477 fps95%
Hodgdon H4198<<locked>>80%36,985 psi63%2372 fps96%
Hodgdon TrailBoss<<locked>>80%23,061 psi39%1421 fps100%
IMR 3031<<locked>>92%31,821 psi54%2428 fps95.5%
IMR 4198<<locked>>80%31,125 psi53%2290 fps98.4%
IMR 4227<<locked>>80%42,482 psi72%2457 fps100%
Lovex D073.428.3 gr86%40,161 psi68%2536 fps95.2%
Lovex D073.5<<locked>>94%41,959 psi71%2562 fps95%
Lovex S053<<locked>>80%41,292 psi70%2415 fps100%
Norma 200<<locked>>80%32,227 psi55%2359 fps98.6%
Norma 202<<locked>>96%36,637 psi62%2487 fps95.3%
ReloadSwiss RS 14<<locked>>80%22,582 psi38%1450 fps100%
ReloadSwiss RS 36<<locked>>80%41,742 psi71%2484 fps100%
ReloadSwiss RS 40<<locked>>92%41,089 psi70%2543 fps95.2%
Rottweil R 901<<locked>>94%37,927 psi65%2477 fps95.4%
Shooters World AR Plus28.3 gr86%40,161 psi68%2536 fps95.2%
SNPE Vectan BA6 1/2<<locked>>80%38,290 psi65%2231 fps100%
SNPE Vectan SP 1028.2 gr86%37,521 psi64%2493 fps95.4%
SNPE Vectan SP 3<<locked>>82%31,517 psi54%2333 fps95.6%
SNPE Vectan Tubal 3000<<locked>>94%37,971 psi65%2418 fps95.4%
SNPE Vectan Tubal 5000<<locked>>98%34,171 psi58%2356 fps95.4%
Somchem S321<<locked>>98%46,804 psi80%2664 fps95.4%
Somchem S335<<locked>>92%34,098 psi58%2365 fps95.4%
Vihtavuori N110<<locked>>80%48,269 psi82%2438 fps100%
Vihtavuori N120<<locked>>80%34,693 psi59%2356 fps100%
Vihtavuori N130<<locked>>80%27,818 psi47%2208 fps96.1%
Vihtavuori N133<<locked>>86%28,979 psi49%2244 fps95.3%
Vihtavuori N135<<locked>>92%28,572 psi49%2316 fps95.6%
Vihtavuori N140<<locked>>98%36,985 psi63%2467 fps95.7%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 45 powders for 6.8 mm Rem. SPC loaded with the .277 | 115gr | Hasler Hunting. Alliant Power Pro 1200-R delivers the highest muzzle velocity at 2,825 fps; across all powders the maximum-charge window runs from 1,588 fps to 2,825 fps. Accurate 2015 gives the best case fill at 100 %, and 45 of the 45 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (405 MPa), the top charges use 53–90 %, leaving at least 10 % headroom. The 115.0 gr projectile in 0.277" calls for a 1:10.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2460, Accurate 2495 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Shooters World AR Plus, Lovex D073.4, SNPE Vectan SP 10 rank at the top here: for 6.8 mm Rem. SPC with the .277 | 115gr | Hasler Hunting they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data