Load data for 6.5 x 70 R + .264 | 120gr | CutEdge MTH

6.5 x 70 R cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:120 gr
Bullet Diameter:0.264"
Bullet Length:<<locked>>
Case Length (l3):2.736"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:38.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:40,611 psi
Recommended Twist Rate:1:8.5

Load data in caliber 6.5 x 70 R with .264 | 120gr | CutEdge MTH bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are IMR 3031, Accurate 4064 and Accurate 2495.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>84%34,998 psi86%2270 fps99.6%
Accurate 2460<<locked>>82%35,404 psi87%2303 fps97.7%
Accurate 2495<<locked>>92%34,737 psi86%2339 fps99.8%
Accurate 2520<<locked>>86%35,447 psi87%2343 fps97.3%
Accurate 4064<<locked>>94%34,983 psi86%2362 fps98.4%
Alliant AR-Comp<<locked>>86%34,708 psi85%2343 fps100%
Hodgdon BL-C2<<locked>>88%36,303 psi89%2375 fps96.3%
Hodgdon TrailBossᴾ<<locked>>100%32,837 psi81%1512 fps100%
IMR 3031<<locked>>88%35,172 psi87%2369 fps99.3%
Lovex D073.5<<locked>>82%35,012 psi86%2293 fps96.3%
Lovex D073.6<<locked>>90%36,274 psi89%2372 fps97.5%
Norma 202<<locked>>88%35,607 psi88%2326 fps98%
ReloadSwiss RS 14ᴾ<<locked>>100%32,866 psi81%1549 fps100%
ReloadSwiss RS 40<<locked>>82%36,666 psi90%2320 fps97.2%
ReloadSwiss RS 60<<locked>>96%36,448 psi90%2421 fps96.4%
Rottweil R 901<<locked>>84%34,911 psi86%2274 fps97.5%
Shooters World Match Rifle<<locked>>90%36,274 psi89%2372 fps97.5%
SNPE Vectan Tubal 3000<<locked>>86%36,042 psi89%2251 fps97.9%
SNPE Vectan Tubal 5000<<locked>>92%35,186 psi87%2254 fps98.6%
Somchem S321<<locked>>84%36,419 psi90%2343 fps95.9%
Somchem S335<<locked>>86%35,012 psi86%2251 fps98.4%
Vihtavuori N130<<locked>>82%36,274 psi89%2254 fps99.9%
Vihtavuori N133<<locked>>86%35,839 psi88%2257 fps99.6%
Vihtavuori N135<<locked>>92%36,622 psi90%2356 fps99.9%
Vihtavuori N140<<locked>>90%35,839 psi88%2313 fps98.3%
Vihtavuori N540<<locked>>90%34,635 psi85%2303 fps97.5%
Winchester 748<<locked>>86%34,983 psi86%2343 fps96.1%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>80%30,748 psi76%2182 fps98.9%
Accurate 2460<<locked>>80%33,069 psi81%2254 fps97%
Accurate 249522.5 gr80%22,945 psi56%2060 fps96.7%
Accurate 2520<<locked>>82%30,792 psi76%2244 fps95.8%
Accurate 406424.2 gr86%26,731 psi66%2172 fps95.6%
Alliant AR-Comp<<locked>>80%28,398 psi70%2205 fps99.9%
Hodgdon BL-C2<<locked>>86%33,910 psi84%2326 fps95.5%
Hodgdon TrailBoss<<locked>>80%24,337 psi60%1352 fps100%
IMR 303122.3 gr80%27,224 psi67%2182 fps97.1%
Lovex D073.5<<locked>>80%32,721 psi81%2247 fps95.5%
Lovex D073.6<<locked>>84%29,341 psi72%2221 fps95.2%
Norma 202<<locked>>80%27,630 psi68%2146 fps95.2%
ReloadSwiss RS 14<<locked>>80%24,076 psi59%1381 fps100%
ReloadSwiss RS 40<<locked>>80%34,229 psi84%2270 fps96.4%
ReloadSwiss RS 60<<locked>>94%34,185 psi84%2365 fps95.4%
Rottweil R 901<<locked>>80%30,879 psi76%2185 fps96.2%
Shooters World Match Rifle<<locked>>84%29,341 psi72%2221 fps95.2%
SNPE Vectan Tubal 3000<<locked>>80%29,936 psi74%2119 fps96%
SNPE Vectan Tubal 5000<<locked>>82%25,585 psi63%2031 fps95.3%
Somchem S321<<locked>>82%34,084 psi84%2293 fps95.1%
Somchem S335<<locked>>80%28,993 psi71%2119 fps96.7%
Vihtavuori N130<<locked>>80%34,229 psi84%2215 fps99.8%
Vihtavuori N133<<locked>>80%29,776 psi73%2133 fps98.5%
Vihtavuori N135<<locked>>80%24,729 psi61%2087 fps97.2%
Vihtavuori N140<<locked>>82%27,992 psi69%2136 fps95.7%
Vihtavuori N540<<locked>>84%28,384 psi70%2162 fps95.2%
Winchester 748<<locked>>84%32,764 psi81%2293 fps95.3%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for 6.5 x 70 R loaded with the .264 | 120gr | CutEdge MTH. ReloadSwiss RS 60 delivers the highest muzzle velocity at 2,421 fps; across all powders the maximum-charge window runs from 1,512 fps to 2,421 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (280 MPa), the top charges use 81–90 %, leaving at least 10 % headroom. The 120.0 gr projectile in 0.264" calls for a 1:8.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. IMR 3031, Accurate 4064, Accurate 2495 rank at the top here: for 6.5 x 70 R with the .264 | 120gr | CutEdge MTH they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data