Load data for 6.5 x 70 R + .264 | 110gr | CutEdge ER Raptor

6.5 x 70 R cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:110 gr
Bullet Diameter:0.264"
Bullet Length:<<locked>>
Case Length (l3):2.736"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:38.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:40,611 psi
Recommended Twist Rate:1:7.5

Load data in caliber 6.5 x 70 R with .264 | 110gr | CutEdge ER Raptor bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are IMR 3031, Vihtavuori N135 and Alliant AR-Comp.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>88%35,389 psi87%2362 fps98.9%
Accurate 2460<<locked>>86%35,360 psi87%2382 fps96.3%
Accurate 2495<<locked>>98%36,492 psi90%2464 fps99.4%
Accurate 4064ᴾ<<locked>>100%36,230 psi89%2474 fps97.5%
ADI AR 2219<<locked>>82%35,810 psi88%2405 fps97.6%
Alliant AR-Comp<<locked>>90%34,780 psi86%2431 fps100%
Alliant Reloder-10x<<locked>>84%35,998 psi89%2385 fps99.6%
Hodgdon H322<<locked>>84%34,998 psi86%2385 fps97.4%
Hodgdon H335<<locked>>84%35,230 psi87%2395 fps96.4%
Hodgdon TrailBossᴾ<<locked>>100%32,010 psi79%1552 fps100%
IMR 3031<<locked>>92%35,259 psi87%2454 fps98.3%
IMR 4198<<locked>>82%35,810 psi88%2333 fps99.9%
Lovex D073.6<<locked>>94%36,158 psi89%2451 fps96.1%
Norma 202<<locked>>92%35,694 psi88%2408 fps96.7%
ReloadSwiss RS 14ᴾ<<locked>>100%31,923 psi79%1591 fps100%
Rottweil R 901<<locked>>88%34,940 psi86%2356 fps96.1%
Shooters World Match Rifle<<locked>>94%36,158 psi89%2451 fps96.1%
SNPE Vectan SP 10<<locked>>82%36,085 psi89%2405 fps96.6%
SNPE Vectan SP 3<<locked>>84%36,608 psi90%2385 fps98.6%
SNPE Vectan Tubal 3000<<locked>>90%36,535 psi90%2333 fps96.7%
SNPE Vectan Tubal 5000<<locked>>96%35,404 psi87%2329 fps97.5%
Somchem S335<<locked>>90%35,244 psi87%2336 fps97.3%
Vihtavuori N130<<locked>>84%34,403 psi85%2300 fps99.2%
Vihtavuori N133<<locked>>90%36,085 psi89%2346 fps98.9%
Vihtavuori N135<<locked>>96%36,114 psi89%2434 fps99.3%
Vihtavuori N140<<locked>>94%36,158 psi89%2395 fps97.1%
Vihtavuori N540<<locked>>94%34,519 psi85%2379 fps96%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>80%27,035 psi67%2172 fps96.5%
Accurate 2460<<locked>>84%33,286 psi82%2339 fps95.6%
Accurate 2495<<locked>>86%23,888 psi59%2172 fps95.7%
Accurate 4064<<locked>>94%29,776 psi73%2333 fps95.3%
ADI AR 2219<<locked>>80%33,359 psi82%2349 fps96.9%
Alliant AR-Comp21.4 gr80%25,135 psi62%2188 fps98.2%
Alliant Reloder-10x<<locked>>80%31,865 psi78%2297 fps99%
Hodgdon H322<<locked>>80%30,705 psi76%2287 fps95.9%
Hodgdon H335<<locked>>82%32,880 psi81%2343 fps95.6%
Hodgdon TrailBoss<<locked>>80%23,322 psi57%1381 fps100%
IMR 303122.4 gr84%27,137 psi67%2251 fps95.3%
IMR 4198<<locked>>80%33,736 psi83%2290 fps99.7%
Lovex D073.6<<locked>>92%33,562 psi83%2398 fps95.2%
Norma 202<<locked>>88%31,314 psi77%2313 fps95.1%
ReloadSwiss RS 14<<locked>>80%23,395 psi58%1421 fps100%
Rottweil R 901<<locked>>86%32,938 psi81%2310 fps95.4%
Shooters World Match Rifle<<locked>>92%33,562 psi83%2398 fps95.2%
SNPE Vectan SP 10<<locked>>80%33,634 psi83%2352 fps95.8%
SNPE Vectan SP 3<<locked>>80%32,387 psi80%2297 fps97.5%
SNPE Vectan Tubal 3000<<locked>>86%32,416 psi80%2247 fps95.3%
SNPE Vectan Tubal 5000<<locked>>90%29,356 psi72%2195 fps95.3%
Somchem S335<<locked>>84%29,327 psi72%2201 fps95.3%
Vihtavuori N130<<locked>>80%30,560 psi75%2215 fps98.4%
Vihtavuori N133<<locked>>80%26,513 psi65%2126 fps96%
Vihtavuori N13521.9 gr84%24,526 psi60%2152 fps95.5%
Vihtavuori N140<<locked>>90%31,850 psi78%2303 fps95.7%
Vihtavuori N540<<locked>>92%32,634 psi80%2336 fps95.3%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for 6.5 x 70 R loaded with the .264 | 110gr | CutEdge ER Raptor. Accurate 4064 delivers the highest muzzle velocity at 2,474 fps; across all powders the maximum-charge window runs from 1,552 fps to 2,474 fps. Accurate 4064 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (280 MPa), the top charges use 79–90 %, leaving at least 10 % headroom. The 110.0 gr projectile in 0.264" calls for a 1:7.5 twist; slower twists will usually not stabilise this weight. Accurate 4064, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. IMR 3031, Vihtavuori N135, Alliant AR-Comp rank at the top here: for 6.5 x 70 R with the .264 | 110gr | CutEdge ER Raptor they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data