Load Specifications
Load data in caliber 6.5 x 68 R with .264 | 120gr | Sako Powerhead Blade bullet and 1 powder. The key underlying parameters are shown in the table above.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 25.6"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Alliant Power Pro Varmint | <<locked>> | 88% | 50,676 psi | 90% | 3087 fps | 98.8% |
Start Load - Barrel Length: 25.6"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Alliant Power Pro Varmint | <<locked>> | 80% | 38,696 psi | 68% | 2831 fps | 95.9% |
This overview compares 1 powders for 6.5 x 68 R loaded with the .264 | 120gr | Sako Powerhead Blade. Alliant Power Pro Varmint delivers the highest muzzle velocity at 3,087 fps; across all powders the maximum-charge window runs from 3,087 fps to 3,087 fps. Alliant Power Pro Varmint gives the best case fill at 88 %, and 1 of the 1 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (390 MPa), the top charges use 90–90 %, leaving at least 10 % headroom. The 120.0 gr projectile in 0.264" calls for a 1:8.5 twist; slower twists will usually not stabilise this weight. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.