Load data for 6 x 70 R + .243 | 88gr | CutEdge MTH

6 x 70 R cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:88 gr
Bullet Diameter:0.243"
Bullet Length:<<locked>>
Case Length (l3):2.75"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:39.9 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:37,710 psi
Recommended Twist Rate:1:8.5

Load data in caliber 6 x 70 R with .243 | 88gr | CutEdge MTH bullet and 12 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>86%33,866 psi90%2566 fps99.7%
Accurate 4064<<locked>>88%34,055 psi90%2589 fps98.3%
Hodgdon TrailBossᴾ<<locked>>100%33,721 psi89%1762 fps100%
IMR 3031<<locked>>82%33,547 psi89%2595 fps99.2%
Lovex D073.6<<locked>>82%32,343 psi86%2536 fps96.6%
Norma 202<<locked>>82%33,866 psi90%2546 fps97.8%
ReloadSwiss RS 14ᴾ<<locked>>100%33,765 psi90%1801 fps100%
Shooters World Match Rifle<<locked>>82%32,343 psi86%2536 fps96.6%
SNPE Vectan Tubal 5000<<locked>>86%33,127 psi88%2464 fps98.4%
Vihtavuori N135<<locked>>84%32,706 psi87%2526 fps99.5%
Vihtavuori N140<<locked>>82%31,836 psi84%2477 fps97.5%
Vihtavuori N540<<locked>>84%32,750 psi87%2513 fps97.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>80%27,296 psi72%2405 fps98.4%
Accurate 4064<<locked>>80%25,889 psi69%2375 fps95.2%
Hodgdon TrailBoss8.5 gr80%24,613 psi65%1568 fps100%
IMR 3031<<locked>>80%31,024 psi82%2533 fps98.6%
Lovex D073.6<<locked>>80%30,298 psi80%2484 fps95.8%
Norma 202<<locked>>80%31,749 psi84%2493 fps97.1%
ReloadSwiss RS 148.7 gr80%24,772 psi66%1611 fps100%
Shooters World Match Rifle<<locked>>80%30,298 psi80%2484 fps95.8%
SNPE Vectan Tubal 5000<<locked>>80%27,224 psi72%2316 fps96.4%
Vihtavuori N135<<locked>>80%28,558 psi76%2428 fps98.7%
Vihtavuori N140<<locked>>80%29,863 psi79%2428 fps96.8%
Vihtavuori N540<<locked>>80%28,587 psi76%2405 fps95.6%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 12 powders for 6 x 70 R loaded with the .243 | 88gr | CutEdge MTH. IMR 3031 delivers the highest muzzle velocity at 2,595 fps; across all powders the maximum-charge window runs from 1,762 fps to 2,595 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 12 of the 12 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (260 MPa), the top charges use 84–90 %, leaving at least 10 % headroom. The 88.0 gr projectile in 0.243" calls for a 1:8.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for 6 x 70 R with the .243 | 88gr | CutEdge MTH they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data