Load data for 6 x 70 R + .243 | 100gr | CutEdge MTAC

6 x 70 R cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:100 gr
Bullet Diameter:0.243"
Bullet Length:<<locked>>
Case Length (l3):2.75"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:39.9 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:37,710 psi
Recommended Twist Rate:1:7.5

Load data in caliber 6 x 70 R with .243 | 100gr | CutEdge MTAC bullet and 15 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N150, ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>84%33,663 psi89%2395 fps100%
Accurate 4064<<locked>>86%34,026 psi90%2425 fps99.1%
Bofors RP3<<locked>>86%33,315 psi88%2415 fps96%
Hodgdon TrailBossᴾ<<locked>>100%33,721 psi89%1631 fps100%
Lovex S062<<locked>>82%32,082 psi85%2339 fps95.8%
ReloadSwiss RS 14ᴾ<<locked>>100%33,881 psi90%1670 fps100%
ReloadSwiss RS 60<<locked>>86%31,720 psi84%2425 fps96.7%
Rottweil R 902<<locked>>82%33,982 psi90%2359 fps96.4%
Shooters World Precision<<locked>>82%32,082 psi85%2339 fps95.8%
SNPE Vectan Tubal 5000<<locked>>84%32,793 psi87%2297 fps99.1%
Somchem S365<<locked>>98%33,910 psi90%2480 fps96.8%
Vihtavuori N135<<locked>>82%32,460 psi86%2356 fps99.9%
Vihtavuori N140<<locked>>82%33,823 psi90%2362 fps98.9%
Vihtavuori N150<<locked>>88%32,996 psi88%2359 fps96.8%
Vihtavuori N540<<locked>>82%32,445 psi86%2349 fps98.2%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>80%29,602 psi79%2306 fps99.6%
Accurate 4064<<locked>>80%28,021 psi74%2283 fps97.4%
Bofors RP3<<locked>>84%31,111 psi83%2362 fps95.1%
Hodgdon TrailBoss8.1 gr80%24,990 psi66%1457 fps100%
Lovex S062<<locked>>80%30,008 psi80%2287 fps95%
ReloadSwiss RS 148.3 gr80%25,237 psi67%1496 fps100%
ReloadSwiss RS 60<<locked>>84%29,791 psi79%2369 fps95.7%
Rottweil R 902<<locked>>80%31,821 psi84%2310 fps95.6%
Shooters World Precision<<locked>>80%30,008 psi80%2287 fps95%
SNPE Vectan Tubal 5000<<locked>>80%28,935 psi77%2211 fps98.2%
Somchem S365<<locked>>96%31,821 psi84%2428 fps95.9%
Vihtavuori N135<<locked>>80%30,618 psi81%2316 fps99.7%
Vihtavuori N140<<locked>>80%31,633 psi84%2316 fps98.4%
Vihtavuori N15025 gr84%28,834 psi76%2260 fps95.1%
Vihtavuori N540<<locked>>80%30,414 psi81%2300 fps97.6%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 15 powders for 6 x 70 R loaded with the .243 | 100gr | CutEdge MTAC. Somchem S365 delivers the highest muzzle velocity at 2,480 fps; across all powders the maximum-charge window runs from 1,631 fps to 2,480 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 15 of the 15 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (260 MPa), the top charges use 84–90 %, leaving at least 10 % headroom. The 100.0 gr projectile in 0.243" calls for a 1:7.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N150, ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for 6 x 70 R with the .243 | 100gr | CutEdge MTAC they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data