Load data for 6 x 52 R Bretschneider + .243 | 65gr | CutEdge ESP Raptor

6 x 52 R Bretschneider cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:65 gr
Bullet Diameter:0.243"
Bullet Length:<<locked>>
Case Length (l3):2.04"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:36.2 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:47,862 psi
Recommended Twist Rate:1:10.5

Load data in caliber 6 x 52 R Bretschneider with .243 | 65gr | CutEdge ESP Raptor bullet and 23 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-10x, Alliant AR-Comp and Norma 200.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>82%41,524 psi87%2904 fps98.7%
Accurate 2015<<locked>>96%41,147 psi86%2979 fps97.9%
Accurate 2495ᴾ<<locked>>100%34,432 psi72%2907 fps96.6%
Accurate LT-30<<locked>>88%42,830 psi89%2917 fps96.7%
ADI AR 2207<<locked>>86%41,423 psi87%2986 fps100%
ADI AR 2219<<locked>>90%42,815 psi89%3051 fps96.5%
Alliant AR-Comp<<locked>>98%40,364 psi84%3058 fps99.6%
Alliant Reloder-10x<<locked>>92%41,829 psi87%3022 fps98.9%
Alliant Reloder-7<<locked>>84%40,727 psi85%2933 fps99%
Baschieri & Pellagri 106<<locked>>88%41,075 psi86%2894 fps96.7%
Hodgdon H322<<locked>>92%41,350 psi86%3018 fps96.1%
Hodgdon TrailBossᴾ<<locked>>100%31,096 psi65%1949 fps100%
IMR 3031ᴾ<<locked>>100%41,234 psi86%3081 fps97.1%
IMR 4198<<locked>>90%41,379 psi86%2966 fps99.4%
Norma 200<<locked>>88%41,684 psi87%3002 fps99.3%
ReloadSwiss RS 14ᴾ<<locked>>100%30,821 psi64%1995 fps100%
SNPE Vectan BA6 1/2<<locked>>84%42,322 psi88%2749 fps100%
SNPE Vectan SP 3<<locked>>92%43,134 psi90%3031 fps97.5%
Somchem S335<<locked>>98%41,147 psi86%2940 fps96%
Vihtavuori N120<<locked>>86%41,640 psi87%2943 fps100%
Vihtavuori N130<<locked>>94%42,873 psi90%2972 fps98.8%
Vihtavuori N133<<locked>>98%42,076 psi88%2959 fps97.9%
Vihtavuori N135ᴾ<<locked>>100%36,941 psi77%2943 fps97%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%38,812 psi81%2844 fps98.2%
Accurate 2015<<locked>>90%33,707 psi70%2808 fps95.7%
Accurate 2495<<locked>>98%31,879 psi67%2841 fps95.6%
Accurate LT-30<<locked>>84%37,826 psi79%2808 fps95.3%
ADI AR 2207<<locked>>80%34,185 psi71%2828 fps99.7%
ADI AR 2219<<locked>>88%39,987 psi84%2989 fps95.7%
Alliant AR-Comp24.2 gr86%27,514 psi57%2703 fps95.6%
Alliant Reloder-10x22.5 gr82%30,414 psi64%2743 fps95.7%
Alliant Reloder-7<<locked>>80%35,882 psi75%2825 fps98%
Baschieri & Pellagri 106<<locked>>84%36,143 psi76%2785 fps95.2%
Hodgdon H322<<locked>>90%38,624 psi81%2956 fps95.2%
Hodgdon TrailBoss<<locked>>80%22,539 psi47%1742 fps100%
IMR 3031<<locked>>96%35,911 psi75%2953 fps95.3%
IMR 4198<<locked>>80%30,661 psi64%2700 fps96.7%
Norma 20022.7 gr80%31,894 psi67%2772 fps97.1%
ReloadSwiss RS 14<<locked>>80%22,437 psi47%1785 fps100%
SNPE Vectan BA6 1/2<<locked>>80%38,130 psi80%2677 fps100%
SNPE Vectan SP 3<<locked>>86%35,346 psi74%2854 fps95.2%
Somchem S335<<locked>>96%38,870 psi81%2890 fps95.3%
Vihtavuori N120<<locked>>80%34,447 psi72%2795 fps100%
Vihtavuori N130<<locked>>84%31,473 psi66%2707 fps95.8%
Vihtavuori N133<<locked>>90%32,750 psi68%2746 fps95%
Vihtavuori N135<<locked>>96%32,460 psi68%2828 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 23 powders for 6 x 52 R Bretschneider loaded with the .243 | 65gr | CutEdge ESP Raptor. IMR 3031 delivers the highest muzzle velocity at 3,081 fps; across all powders the maximum-charge window runs from 1,949 fps to 3,081 fps. Accurate 2495 gives the best case fill at 100 %, and 23 of the 23 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (330 MPa), the top charges use 64–90 %, leaving at least 10 % headroom. The 65.0 gr projectile in 0.243" calls for a 1:10.5 twist; slower twists will usually not stabilise this weight. Accurate 2495, Hodgdon TrailBoss, IMR 3031 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-10x, Alliant AR-Comp, Norma 200 rank at the top here: for 6 x 52 R Bretschneider with the .243 | 65gr | CutEdge ESP Raptor they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data