Load data for 6 x 52 R Bretschneider + .243 | 60gr | CutEdge ER Raptor

6 x 52 R Bretschneider cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:60 gr
Bullet Diameter:0.243"
Bullet Length:<<locked>>
Case Length (l3):2.04"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:36.2 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:47,862 psi
Recommended Twist Rate:1:8.0

Load data in caliber 6 x 52 R Bretschneider with .243 | 60gr | CutEdge ER Raptor bullet and 17 powders. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>84%40,364 psi84%2953 fps97.4%
Accurate 2015ᴾ<<locked>>100%40,901 psi85%3054 fps96.6%
ADI AR 2207<<locked>>90%41,989 psi88%3091 fps99.9%
Alliant AR-Compᴾ<<locked>>100%38,130 psi80%3077 fps98.3%
Alliant Reloder-10x<<locked>>96%42,047 psi88%3110 fps98%
Alliant Reloder-7<<locked>>88%41,481 psi87%3031 fps98.2%
Hodgdon TrailBossᴾ<<locked>>100%29,921 psi63%1985 fps100%
IMR 4198<<locked>>94%42,424 psi89%3068 fps98.7%
IMR 4227<<locked>>84%43,105 psi90%3022 fps99.6%
Lovex S053<<locked>>84%41,901 psi88%2989 fps100%
Norma 200<<locked>>92%41,684 psi87%3091 fps98.6%
ReloadSwiss RS 14ᴾ<<locked>>100%29,544 psi62%2031 fps100%
ReloadSwiss RS 36<<locked>>84%42,134 psi88%3041 fps99.4%
SNPE Vectan BA6 1/2<<locked>>88%43,178 psi90%2861 fps100%
Vihtavuori N120<<locked>>90%42,221 psi88%3048 fps100%
Vihtavuori N130<<locked>>96%40,973 psi86%3012 fps97.4%
Vihtavuori N133ᴾ<<locked>>100%39,914 psi83%2986 fps96%

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%35,027 psi73%2828 fps95.9%
Accurate 2015<<locked>>98%38,450 psi80%3002 fps95.9%
ADI AR 2207<<locked>>80%30,240 psi63%2812 fps98.1%
Alliant AR-Comp<<locked>>94%31,444 psi66%2894 fps95.9%
Alliant Reloder-10x<<locked>>88%32,430 psi68%2881 fps95.1%
Alliant Reloder-7<<locked>>80%31,865 psi67%2799 fps95.4%
Hodgdon TrailBoss<<locked>>80%22,017 psi46%1785 fps100%
IMR 4198<<locked>>84%31,502 psi66%2795 fps95.6%
IMR 4227<<locked>>80%38,116 psi80%2917 fps98.9%
Lovex S053<<locked>>80%37,101 psi78%2887 fps100%
Norma 200<<locked>>82%29,950 psi63%2799 fps95%
ReloadSwiss RS 14<<locked>>80%21,480 psi45%1821 fps100%
ReloadSwiss RS 36<<locked>>80%37,347 psi78%2936 fps98.7%
SNPE Vectan BA6 1/2<<locked>>80%34,664 psi72%2700 fps100%
Vihtavuori N120<<locked>>80%30,530 psi64%2785 fps99.1%
Vihtavuori N130<<locked>>90%33,779 psi71%2844 fps95.3%
Vihtavuori N133<<locked>>98%37,637 psi79%2936 fps95.3%

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 40 powders for 6 x 52 R Bretschneider loaded with the .243 | 60gr | CutEdge ER Raptor. Hodgdon H335 delivers the highest muzzle velocity at 3,114 fps; across all powders the maximum-charge window runs from 1,985 fps to 3,114 fps. Accurate 2015 gives the best case fill at 100 %, and 40 of the 40 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (330 MPa), the top charges use 60–90 %, leaving at least 10 % headroom. The 60.0 gr projectile in 0.243" calls for a 1:8.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2495, Accurate 2520 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. As outliers, Accurate 2460, Accurate 2495, Accurate 2520 burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data