
Load Specifications
Load data in caliber 6 x 52 R Bretschneider with .243 | 55gr | CutEdge ESP Raptor bullet and 35 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-10x, Norma 200 and ADI AR 2207.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 84% | 41,408 psi | 87% | 3123 fps | 97.5% |
| Accurate 1680 | <<locked>> | 84% | 41,669 psi | 87% | 3133 fps | 97.6% |
| Accurate 2015ᴾ | <<locked>> | 100% | 42,366 psi | 89% | 3228 fps | 96.8% |
| Accurate 2015ᴾ | <<locked>> | 100% | 43,091 psi | 90% | 3251 fps | 97% |
| ADI AR 2207 | <<locked>> | 90% | 43,120 psi | 90% | 3264 fps | 99.9% |
| ADI AR 2207 | <<locked>> | 88% | 41,089 psi | 86% | 3228 fps | 99.8% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 39,262 psi | 82% | 3251 fps | 98.4% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 39,885 psi | 83% | 3271 fps | 98.6% |
| Alliant Reloder-10x | <<locked>> | 94% | 40,654 psi | 85% | 3228 fps | 97.5% |
| Alliant Reloder-10x | <<locked>> | 94% | 40,915 psi | 85% | 3241 fps | 97.6% |
| Alliant Reloder-7 | <<locked>> | 88% | 42,453 psi | 89% | 3202 fps | 98.2% |
| Alliant Reloder-7 | <<locked>> | 88% | 42,728 psi | 89% | 3212 fps | 98.4% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 30,269 psi | 63% | 2123 fps | 100% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 30,385 psi | 63% | 2129 fps | 100% |
| IMR 4198 | <<locked>> | 92% | 40,611 psi | 85% | 3179 fps | 98.2% |
| IMR 4198 | <<locked>> | 92% | 40,901 psi | 85% | 3192 fps | 98.3% |
| IMR 4227 | <<locked>> | 82% | 41,466 psi | 87% | 3143 fps | 99.3% |
| IMR 4227 | <<locked>> | 82% | 41,785 psi | 87% | 3156 fps | 99.4% |
| Lovex S053 | <<locked>> | 84% | 42,859 psi | 90% | 3159 fps | 100% |
| Lovex S053 | <<locked>> | 84% | 43,221 psi | 90% | 3173 fps | 100% |
| Norma 200 | <<locked>> | 92% | 43,265 psi | 90% | 3268 fps | 98.7% |
| Norma 200 | <<locked>> | 90% | 40,770 psi | 85% | 3222 fps | 98.3% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 29,834 psi | 62% | 2169 fps | 100% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 29,936 psi | 63% | 2175 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 82% | 40,611 psi | 85% | 3159 fps | 99.1% |
| ReloadSwiss RS 36 | <<locked>> | 82% | 40,944 psi | 86% | 3173 fps | 99.2% |
| SNPE Vectan BA6 1/2 | <<locked>> | 86% | 41,597 psi | 87% | 2986 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 86% | 42,003 psi | 88% | 2995 fps | 100% |
| SNPE Vectan SP 3 | <<locked>> | 94% | 42,322 psi | 88% | 3248 fps | 95.8% |
| Vihtavuori N120 | <<locked>> | 88% | 40,973 psi | 86% | 3176 fps | 100% |
| Vihtavuori N120 | <<locked>> | 88% | 41,278 psi | 86% | 3186 fps | 100% |
| Vihtavuori N130 | <<locked>> | 96% | 41,800 psi | 87% | 3176 fps | 97.4% |
| Vihtavuori N130 | <<locked>> | 96% | 42,525 psi | 89% | 3196 fps | 97.7% |
| Vihtavuori N133ᴾ | <<locked>> | 100% | 41,263 psi | 86% | 3159 fps | 96.2% |
| Vihtavuori N133ᴾ | <<locked>> | 100% | 41,481 psi | 87% | 3169 fps | 96.4% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 35,940 psi | 75% | 2992 fps | 95.9% |
| Accurate 1680 | <<locked>> | 80% | 36,201 psi | 76% | 3005 fps | 96.1% |
| Accurate 2015 | <<locked>> | 96% | 36,912 psi | 77% | 3104 fps | 95.1% |
| Accurate 2015 | <<locked>> | 96% | 37,623 psi | 79% | 3130 fps | 95.5% |
| ADI AR 2207 | 22.8 gr | 80% | 31,154 psi | 65% | 2972 fps | 98.1% |
| ADI AR 2207 | 22.8 gr | 80% | 31,488 psi | 66% | 2989 fps | 98.3% |
| Alliant AR-Comp | <<locked>> | 92% | 30,371 psi | 63% | 2995 fps | 95% |
| Alliant AR-Comp | <<locked>> | 92% | 30,603 psi | 64% | 3009 fps | 95.2% |
| Alliant Reloder-10x | 25.3 gr | 88% | 33,446 psi | 70% | 3048 fps | 95.2% |
| Alliant Reloder-10x | 25.3 gr | 88% | 33,765 psi | 71% | 3061 fps | 95.4% |
| Alliant Reloder-7 | <<locked>> | 80% | 32,866 psi | 69% | 2963 fps | 95.5% |
| Alliant Reloder-7 | <<locked>> | 80% | 33,156 psi | 69% | 2979 fps | 95.7% |
| Hodgdon TrailBoss | <<locked>> | 80% | 21,770 psi | 45% | 1896 fps | 100% |
| Hodgdon TrailBoss | <<locked>> | 80% | 21,944 psi | 46% | 1906 fps | 100% |
| IMR 4198 | <<locked>> | 84% | 32,227 psi | 67% | 2956 fps | 95.5% |
| IMR 4198 | <<locked>> | 84% | 32,503 psi | 68% | 2972 fps | 95.8% |
| IMR 4227 | <<locked>> | 80% | 38,682 psi | 81% | 3077 fps | 98.8% |
| IMR 4227 | <<locked>> | 80% | 39,044 psi | 82% | 3094 fps | 99% |
| Lovex S053 | <<locked>> | 80% | 37,855 psi | 79% | 3054 fps | 100% |
| Lovex S053 | <<locked>> | 80% | 38,247 psi | 80% | 3068 fps | 100% |
| Norma 200 | 24.4 gr | 82% | 30,792 psi | 64% | 2959 fps | 95% |
| Norma 200 | 24.4 gr | 82% | 31,125 psi | 65% | 2972 fps | 95.3% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 21,582 psi | 45% | 1942 fps | 100% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 21,741 psi | 45% | 1952 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 80% | 37,985 psi | 79% | 3097 fps | 98.6% |
| ReloadSwiss RS 36 | <<locked>> | 80% | 38,305 psi | 80% | 3114 fps | 98.7% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 35,070 psi | 73% | 2854 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 35,476 psi | 74% | 2871 fps | 100% |
| SNPE Vectan SP 3 | <<locked>> | 92% | 39,566 psi | 83% | 3182 fps | 95% |
| Vihtavuori N120 | <<locked>> | 80% | 31,401 psi | 66% | 2946 fps | 99.1% |
| Vihtavuori N120 | <<locked>> | 80% | 31,705 psi | 66% | 2959 fps | 99.2% |
| Vihtavuori N130 | <<locked>> | 90% | 34,592 psi | 72% | 3002 fps | 95.3% |
| Vihtavuori N130 | <<locked>> | 90% | 34,838 psi | 73% | 3015 fps | 95.5% |
| Vihtavuori N133 | <<locked>> | 98% | 38,624 psi | 81% | 3100 fps | 95.4% |
| Vihtavuori N133 | <<locked>> | 98% | 38,827 psi | 81% | 3110 fps | 95.6% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 35 powders for 6 x 52 R Bretschneider loaded with the .243 | 55gr | CutEdge ESP Raptor. Alliant AR-Comp delivers the highest muzzle velocity at 3,271 fps; across all powders the maximum-charge window runs from 2,123 fps to 3,271 fps. Accurate 2015 gives the best case fill at 100 %, and 35 of the 35 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (330 MPa), the top charges use 62–90 %, leaving at least 10 % headroom. The 55.0 gr projectile in 0.243" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2015, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-10x, Norma 200, ADI AR 2207 rank at the top here: for 6 x 52 R Bretschneider with the .243 | 55gr | CutEdge ESP Raptor they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.