Load data for 6 x 47 ATZL + .243 | 60gr | CutEdge ER Raptor

6 x 47 ATZL cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:60 gr
Bullet Diameter:0.243"
Bullet Length:<<locked>>
Case Length (l3):1.85"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:33 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:23.62"
Max. allowed Pressure:58,740 psi
Recommended Twist Rate:1:8.0

Load data in caliber 6 x 47 ATZL with .243 | 60gr | CutEdge ER Raptor bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 36, ADI AR 2207 and Alliant Reloder-7.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>94%51,822 psi88%3166 fps98.6%
Accurate 5744<<locked>>84%51,663 psi88%3215 fps99.2%
Accurate LT-30ᴾ<<locked>>100%51,576 psi88%3146 fps96.2%
Accurate No. 11 FS<<locked>>82%50,415 psi86%3140 fps100%
ADI AR 2205<<locked>>86%51,169 psi87%3061 fps100%
ADI AR 2207ᴾ<<locked>>100%52,069 psi89%3281 fps100%
Alliant Reloder-10xᴾ<<locked>>100%42,554 psi72%3130 fps97.3%
Alliant Reloder-7<<locked>>98%51,416 psi88%3222 fps99.1%
Baschieri & Pellagri 106ᴾ<<locked>>100%49,400 psi84%3120 fps96.1%
Hodgdon H4198ᴾ<<locked>>100%53,113 psi90%3196 fps95.9%
Hodgdon TrailBossᴾ<<locked>>100%29,109 psi50%1952 fps100%
IMR 4198ᴾ<<locked>>100%45,992 psi78%3140 fps98.6%
IMR 4227<<locked>>92%51,010 psi87%3166 fps99.8%
Lovex D060<<locked>>86%51,663 psi88%3215 fps99.2%
Lovex D063<<locked>>86%52,562 psi89%3176 fps99.6%
Lovex S053<<locked>>94%51,517 psi88%3163 fps100%
Norma 200ᴾ<<locked>>100%48,399 psi82%3228 fps98.9%
ReloadSwiss RS 14ᴾ<<locked>>100%28,703 psi49%2001 fps100%
ReloadSwiss RS 36<<locked>>94%52,649 psi90%3238 fps99.9%
Shooters World Blackout<<locked>>82%51,169 psi87%3179 fps99.2%
Shooters World Buffalo Rifle<<locked>>86%51,663 psi88%3215 fps99.2%
Shooters World SOCOM<<locked>>86%52,562 psi89%3176 fps99.6%
SNPE Vectan BA6 1/2<<locked>>98%52,301 psi89%3009 fps100%
Vihtavuori N110<<locked>>88%51,256 psi87%3091 fps100%
Vihtavuori N120ᴾ<<locked>>100%47,892 psi82%3156 fps100%
Vihtavuori N130ᴾ<<locked>>100%40,553 psi69%3009 fps96.4%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>84%36,941 psi63%2874 fps95.4%
Accurate 5744<<locked>>80%45,643 psi78%3097 fps98.4%
Accurate LT-30<<locked>>98%48,457 psi82%3091 fps95.5%
Accurate No. 11 FS<<locked>>80%46,789 psi80%3077 fps100%
ADI AR 2205<<locked>>80%42,424 psi72%2910 fps100%
ADI AR 220719.4 gr80%27,209 psi46%2723 fps96.2%
Alliant Reloder-10x<<locked>>94%34,983 psi60%2953 fps95%
Alliant Reloder-721.6 gr86%35,186 psi60%2887 fps95.6%
Baschieri & Pellagri 106<<locked>>98%46,557 psi79%3068 fps95.5%
Hodgdon H4198<<locked>>98%49,922 psi85%3140 fps95.2%
Hodgdon TrailBoss<<locked>>80%21,306 psi36%1752 fps100%
IMR 4198<<locked>>90%34,142 psi58%2864 fps95.5%
IMR 4227<<locked>>80%34,925 psi59%2838 fps97.5%
Lovex D060<<locked>>80%42,917 psi73%3038 fps97.8%
Lovex D063<<locked>>80%43,018 psi73%3002 fps98.5%
Lovex S053<<locked>>80%33,808 psi58%2812 fps99.5%
Norma 200<<locked>>88%32,430 psi55%2874 fps95%
ReloadSwiss RS 14<<locked>>80%20,726 psi35%1788 fps100%
ReloadSwiss RS 3620.2 gr80%33,808 psi58%2851 fps97%
Shooters World Blackout<<locked>>80%48,022 psi82%3123 fps98.8%
Shooters World Buffalo Rifle<<locked>>80%42,917 psi73%3038 fps97.8%
Shooters World SOCOM<<locked>>80%43,018 psi73%3002 fps98.5%
SNPE Vectan BA6 1/2<<locked>>80%31,749 psi54%2644 fps100%
Vihtavuori N110<<locked>>80%40,190 psi68%2904 fps100%
Vihtavuori N120<<locked>>80%25,904 psi44%2644 fps96.9%
Vihtavuori N130<<locked>>98%38,087 psi65%2953 fps95.7%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 37 powders for 6 x 47 ATZL loaded with the .243 | 60gr | CutEdge ER Raptor. ADI AR 2207 delivers the highest muzzle velocity at 3,281 fps; across all powders the maximum-charge window runs from 1,952 fps to 3,281 fps. Accurate 2015 gives the best case fill at 100 %, and 37 of the 37 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (405 MPa), the top charges use 49–90 %, leaving at least 10 % headroom. The 60.0 gr projectile in 0.243" calls for a 1:8.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate LT-30, Accurate LT-32 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 36, ADI AR 2207, Alliant Reloder-7 rank at the top here: for 6 x 47 ATZL with the .243 | 60gr | CutEdge ER Raptor they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 2015, Accurate LT-32, Hodgdon CFE BLK burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data