Load data for 6 mm B.R. Norma + .243 | 60gr | CutEdge ER Raptor

6 mm B.R. Norma cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:60 gr
Bullet Diameter:0.243"
Bullet Length:<<locked>>
Case Length (l3):1.55"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:36.5 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:58,740 psi
Recommended Twist Rate:1:8.0

Load data in caliber 6 mm B.R. Norma with .243 | 60gr | CutEdge ER Raptor bullet and 30 powders. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>90%52,765 psi90%3297 fps99.7%
Accurate 2015ᴾ<<locked>>100%44,353 psi76%3235 fps98%
Accurate 2460ᴾ<<locked>>100%50,140 psi85%3350 fps96.3%
Accurate LT-30<<locked>>94%49,980 psi85%3241 fps97.6%
ADI AR 2205<<locked>>82%51,169 psi87%3163 fps100%
ADI AR 2207<<locked>>94%51,648 psi88%3369 fps100%
ADI AR 2219<<locked>>96%50,430 psi86%3392 fps97.6%
Alliant AR-Compᴾ<<locked>>100%41,437 psi71%3268 fps99.4%
Alliant Reloder-10xᴾ<<locked>>100%51,430 psi88%3399 fps99.7%
Alliant Reloder-7<<locked>>92%50,357 psi86%3314 fps99.7%
Baschieri & Pellagri 106<<locked>>96%51,634 psi88%3274 fps98.3%
Hodgdon H322ᴾ<<locked>>100%51,561 psi88%3412 fps97.8%
Hodgdon H335ᴾ<<locked>>100%53,142 psi90%3432 fps97.1%
Hodgdon H4198<<locked>>92%51,953 psi88%3301 fps97.4%
Hodgdon TrailBossᴾ<<locked>>100%30,835 psi52%2073 fps100%
IMR 4198<<locked>>98%50,865 psi87%3343 fps99.9%
IMR 4227<<locked>>88%51,663 psi88%3287 fps100%
Lovex D060<<locked>>82%51,532 psi88%3330 fps99.8%
Lovex S053<<locked>>90%53,127 psi90%3284 fps100%
Norma 200<<locked>>96%51,677 psi88%3386 fps99.9%
ReloadSwiss RS 14ᴾ<<locked>>100%30,458 psi52%2123 fps100%
ReloadSwiss RS 36<<locked>>88%51,517 psi88%3323 fps100%
Shooters World Buffalo Rifle<<locked>>82%51,532 psi88%3330 fps99.8%
SNPE Vectan BA6 1/2<<locked>>92%50,952 psi87%3074 fps100%
SNPE Vectan SP 10<<locked>>96%50,633 psi86%3386 fps96.6%
SNPE Vectan SP 3ᴾ<<locked>>100%53,069 psi90%3412 fps98.8%
Vihtavuori N110<<locked>>84%51,967 psi88%3182 fps100%
Vihtavuori N120<<locked>>94%51,793 psi88%3314 fps100%
Vihtavuori N130ᴾ<<locked>>100%49,661 psi85%3291 fps99.4%
Vihtavuori N133ᴾ<<locked>>100%42,960 psi73%3163 fps97.5%

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%37,449 psi64%2992 fps97.3%
Accurate 2015<<locked>>92%34,229 psi58%3002 fps95.2%
Accurate 2460<<locked>>98%46,311 psi79%3278 fps95.3%
Accurate LT-30<<locked>>88%41,307 psi70%3064 fps95.6%
ADI AR 2205<<locked>>80%48,501 psi83%3120 fps100%
ADI AR 2207<<locked>>80%32,837 psi56%2976 fps99.2%
ADI AR 2219<<locked>>90%40,944 psi70%3196 fps95.2%
Alliant AR-Comp<<locked>>90%29,762 psi51%2946 fps95.9%
Alliant Reloder-10x<<locked>>84%30,690 psi52%2927 fps95.1%
Alliant Reloder-7<<locked>>80%34,461 psi59%2966 fps97%
Baschieri & Pellagri 106<<locked>>88%39,320 psi67%3031 fps95.5%
Hodgdon H322<<locked>>94%42,279 psi72%3225 fps95.6%
Hodgdon H335<<locked>>96%46,195 psi79%3301 fps95.6%
Hodgdon H4198<<locked>>86%42,815 psi73%3117 fps95.3%
Hodgdon TrailBoss<<locked>>80%22,307 psi38%1854 fps100%
IMR 4198<<locked>>80%29,501 psi50%2831 fps95.4%
IMR 4227<<locked>>80%40,422 psi69%3071 fps99.6%
Lovex D060<<locked>>80%48,820 psi83%3278 fps99.7%
Lovex S053<<locked>>80%39,160 psi67%3028 fps100%
Norma 200<<locked>>80%30,356 psi52%2904 fps95.9%
ReloadSwiss RS 14<<locked>>80%22,162 psi38%1900 fps100%
ReloadSwiss RS 36<<locked>>80%39,726 psi68%3091 fps99.4%
Shooters World Buffalo Rifle<<locked>>80%48,820 psi83%3278 fps99.7%
SNPE Vectan BA6 1/2<<locked>>80%36,695 psi62%2828 fps100%
SNPE Vectan SP 10<<locked>>94%47,442 psi81%3327 fps95.8%
SNPE Vectan SP 3<<locked>>90%38,464 psi65%3114 fps95.6%
Vihtavuori N110<<locked>>80%46,311 psi79%3091 fps100%
Vihtavuori N120<<locked>>80%33,054 psi56%2943 fps99.8%
Vihtavuori N130<<locked>>86%32,053 psi55%2897 fps95.3%
Vihtavuori N133<<locked>>94%35,752 psi61%2995 fps95.4%

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 58 powders for 6 mm B.R. Norma loaded with the .243 | 60gr | CutEdge ER Raptor. Alliant Power Pro 1200-R delivers the highest muzzle velocity at 3,468 fps; across all powders the maximum-charge window runs from 2,073 fps to 3,468 fps. Accurate 2015 gives the best case fill at 100 %, and 58 of the 58 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (405 MPa), the top charges use 52–90 %, leaving at least 10 % headroom. The 60.0 gr projectile in 0.243" calls for a 1:8.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2460, Accurate 2495 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. As outliers, Accurate 2520, ADI Benchmark 8208, Alliant Power Pro 1200-R burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data