Load data for 6 mm ARC + .243 | 65gr | CutEdge ESP Raptor

6 mm ARC cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:65 gr
Bullet Diameter:0.243"
Bullet Length:<<locked>>
Case Length (l3):1.5"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34.5 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:52,000 psi
Recommended Twist Rate:1:10.5

Load data in caliber 6 mm ARC with .243 | 65gr | CutEdge ESP Raptor bullet and 28 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-10x, ADI AR 2219 and Hodgdon H322.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>86%46,253 psi89%3048 fps99.3%
Accurate 2015ᴾ<<locked>>100%45,165 psi87%3117 fps98.5%
Accurate 2460<<locked>>98%46,688 psi90%3156 fps96%
Accurate LT-30<<locked>>90%44,585 psi86%3005 fps97%
ADI AR 2207<<locked>>90%45,643 psi88%3123 fps100%
ADI AR 2219<<locked>>92%44,425 psi85%3140 fps96.7%
Alliant AR-Compᴾ<<locked>>100%41,814 psi80%3146 fps99.7%
Alliant Reloder-10x<<locked>>96%45,934 psi88%3163 fps99.4%
Alliant Reloder-7<<locked>>88%44,788 psi86%3071 fps99.4%
Baschieri & Pellagri 106<<locked>>92%45,324 psi87%3035 fps97.5%
Hodgdon H322<<locked>>96%45,440 psi87%3163 fps97%
Hodgdon H335<<locked>>96%46,934 psi90%3186 fps96.3%
Hodgdon H4198<<locked>>88%46,166 psi89%3054 fps96.7%
Hodgdon TrailBossᴾ<<locked>>100%30,647 psi59%1962 fps100%
IMR 3031ᴾ<<locked>>100%39,363 psi76%3094 fps96.3%
IMR 4198<<locked>>94%45,614 psi88%3107 fps99.7%
IMR 4227<<locked>>84%46,122 psi89%3045 fps100%
Lovex S053<<locked>>84%44,976 psi86%3002 fps100%
Norma 200<<locked>>92%45,730 psi88%3140 fps99.7%
ReloadSwiss RS 14ᴾ<<locked>>100%30,342 psi58%2008 fps100%
ReloadSwiss RS 36<<locked>>84%45,556 psi88%3077 fps100%
SNPE Vectan BA6 1/2<<locked>>88%46,311 psi89%2864 fps100%
SNPE Vectan SP 3<<locked>>96%46,905 psi90%3163 fps98.2%
Somchem S335ᴾ<<locked>>100%42,540 psi82%3022 fps96.1%
Vihtavuori N120<<locked>>90%45,861 psi88%3074 fps100%
Vihtavuori N130<<locked>>96%44,005 psi85%3051 fps98.9%
Vihtavuori N133ᴾ<<locked>>100%43,134 psi83%3038 fps98%
Vihtavuori N135ᴾ<<locked>>100%35,230 psi68%2956 fps96.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%37,739 psi73%2874 fps97.8%
Accurate 2015<<locked>>90%32,460 psi62%2831 fps95.1%
Accurate 2460<<locked>>96%43,453 psi84%3094 fps95.1%
Accurate LT-30<<locked>>86%38,957 psi75%2884 fps95.5%
ADI AR 2207<<locked>>80%33,069 psi64%2851 fps99.5%
ADI AR 221926.3 gr88%38,740 psi74%3012 fps95.1%
Alliant AR-Comp<<locked>>88%28,224 psi54%2782 fps95.9%
Alliant Reloder-10x22.4 gr82%29,370 psi56%2766 fps95.2%
Alliant Reloder-7<<locked>>80%34,824 psi67%2851 fps97.6%
Baschieri & Pellagri 106<<locked>>86%37,420 psi72%2867 fps95.4%
Hodgdon H32226.6 gr92%40,089 psi77%3045 fps95.5%
Hodgdon H335<<locked>>94%43,395 psi83%3114 fps95.3%
Hodgdon H4198<<locked>>84%40,770 psi78%2943 fps95.3%
Hodgdon TrailBoss<<locked>>80%22,524 psi43%1759 fps100%
IMR 3031<<locked>>98%37,144 psi71%3041 fps95.5%
IMR 4198<<locked>>80%29,863 psi57%2723 fps96.2%
IMR 4227<<locked>>80%40,973 psi79%2946 fps99.8%
Lovex S053<<locked>>80%39,610 psi76%2900 fps100%
Norma 200<<locked>>80%30,792 psi59%2795 fps96.7%
ReloadSwiss RS 14<<locked>>80%22,046 psi42%1795 fps100%
ReloadSwiss RS 36<<locked>>80%40,161 psi77%2969 fps99.7%
SNPE Vectan BA6 1/2<<locked>>80%37,159 psi71%2703 fps100%
SNPE Vectan SP 3<<locked>>88%36,753 psi71%2943 fps95.6%
Somchem S335<<locked>>98%39,813 psi77%2966 fps95.4%
Vihtavuori N120<<locked>>80%33,344 psi64%2822 fps99.9%
Vihtavuori N130<<locked>>84%30,443 psi59%2730 fps95.3%
Vihtavuori N133<<locked>>92%33,982 psi65%2828 fps95.4%
Vihtavuori N135<<locked>>98%33,243 psi64%2904 fps95.5%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 28 powders for 6 mm ARC loaded with the .243 | 65gr | CutEdge ESP Raptor. Hodgdon H335 delivers the highest muzzle velocity at 3,186 fps; across all powders the maximum-charge window runs from 1,962 fps to 3,186 fps. Accurate 2015 gives the best case fill at 100 %, and 28 of the 28 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (359 MPa), the top charges use 58–90 %, leaving at least 10 % headroom. The 65.0 gr projectile in 0.243" calls for a 1:10.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-10x, ADI AR 2219, Hodgdon H322 rank at the top here: for 6 mm ARC with the .243 | 65gr | CutEdge ESP Raptor they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data