
Load Specifications
Load data in caliber 5.6 x 50 R Mag. with .224 | 55gr | CutEdge MTAC bullet and 36 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, Hodgdon H322 and SNPE Vectan SP 3.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 94% | 43,642 psi | 89% | 3064 fps | 99.1% |
| Accurate 2460 | <<locked>> | 90% | 42,293 psi | 86% | 3048 fps | 96.2% |
| Accurate 2495ᴾ | <<locked>> | 100% | 40,901 psi | 83% | 3074 fps | 99% |
| Accurate 2520 | <<locked>> | 96% | 43,961 psi | 89% | 3127 fps | 96.2% |
| Accurate 4064ᴾ | <<locked>> | 100% | 37,985 psi | 77% | 3022 fps | 95.9% |
| Accurate LT-30 | <<locked>> | 86% | 44,512 psi | 90% | 2999 fps | 98.1% |
| ADI AR 2207 | <<locked>> | 84% | 43,816 psi | 89% | 3064 fps | 100% |
| ADI AR 2219 | <<locked>> | 86% | 41,901 psi | 85% | 3077 fps | 97.4% |
| Alliant AR-Comp | <<locked>> | 96% | 43,613 psi | 88% | 3159 fps | 100% |
| Alliant Reloder-10x | <<locked>> | 88% | 41,437 psi | 84% | 3051 fps | 99.4% |
| Alliant Reloder-7 | <<locked>> | 82% | 42,409 psi | 86% | 3009 fps | 99.7% |
| Baschieri & Pellagri 106 | <<locked>> | 86% | 43,105 psi | 87% | 2976 fps | 98.1% |
| Hodgdon H322 | <<locked>> | 92% | 42,960 psi | 87% | 3097 fps | 97.6% |
| Hodgdon H335 | <<locked>> | 88% | 44,367 psi | 90% | 3117 fps | 97% |
| Hodgdon H4198 | <<locked>> | 84% | 43,134 psi | 87% | 2992 fps | 97.2% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 31,734 psi | 64% | 2014 fps | 100% |
| IMR 3031ᴾ | <<locked>> | 100% | 42,032 psi | 85% | 3140 fps | 98.3% |
| IMR 4198 | <<locked>> | 88% | 43,395 psi | 88% | 3051 fps | 99.9% |
| Lovex D073.6 | <<locked>> | 98% | 43,395 psi | 88% | 3117 fps | 96.1% |
| Norma 200 | <<locked>> | 86% | 43,990 psi | 89% | 3081 fps | 99.9% |
| Norma 202 | <<locked>> | 96% | 42,076 psi | 85% | 3071 fps | 96.5% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 31,618 psi | 64% | 2064 fps | 100% |
| Rottweil R 901 | <<locked>> | 94% | 43,134 psi | 87% | 3064 fps | 96.4% |
| Shooters World Match Rifle | <<locked>> | 98% | 43,395 psi | 88% | 3117 fps | 96.1% |
| SNPE Vectan BA6 1/2 | <<locked>> | 82% | 43,714 psi | 89% | 2808 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 86% | 42,699 psi | 87% | 3077 fps | 96.4% |
| SNPE Vectan SP 3 | <<locked>> | 88% | 42,627 psi | 86% | 3061 fps | 98.3% |
| SNPE Vectan Tubal 3000 | <<locked>> | 94% | 42,772 psi | 87% | 2989 fps | 96.4% |
| SNPE Vectan Tubal 5000ᴾ | <<locked>> | 100% | 41,147 psi | 83% | 2966 fps | 97.2% |
| Somchem S335 | <<locked>> | 96% | 43,700 psi | 89% | 3028 fps | 97.7% |
| Vihtavuori N120 | <<locked>> | 86% | 43,555 psi | 88% | 3009 fps | 100% |
| Vihtavuori N130 | <<locked>> | 92% | 44,454 psi | 90% | 3045 fps | 99.6% |
| Vihtavuori N133 | <<locked>> | 98% | 43,903 psi | 89% | 3038 fps | 99% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 42,337 psi | 86% | 3094 fps | 99.1% |
| Vihtavuori N140 | <<locked>> | 98% | 41,524 psi | 84% | 3031 fps | 96.7% |
| Vihtavuori N540ᴾ | <<locked>> | 100% | 44,411 psi | 90% | 3114 fps | 97% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 82% | 29,559 psi | 60% | 2733 fps | 95.1% |
| Accurate 2460 | <<locked>> | 88% | 39,276 psi | 80% | 2986 fps | 95.3% |
| Accurate 2495 | <<locked>> | 90% | 28,500 psi | 58% | 2769 fps | 95.2% |
| Accurate 2520 | <<locked>> | 94% | 40,741 psi | 83% | 3061 fps | 95.3% |
| Accurate 4064 | <<locked>> | 98% | 35,636 psi | 72% | 2966 fps | 95.1% |
| Accurate LT-30 | <<locked>> | 80% | 36,782 psi | 75% | 2831 fps | 96.1% |
| ADI AR 2207 | <<locked>> | 80% | 38,638 psi | 78% | 2963 fps | 100% |
| ADI AR 2219 | <<locked>> | 82% | 36,564 psi | 74% | 2953 fps | 95.8% |
| Alliant AR-Comp | 21.4 gr | 80% | 25,454 psi | 52% | 2677 fps | 95.7% |
| Alliant Reloder-10x | <<locked>> | 80% | 32,242 psi | 65% | 2831 fps | 97.3% |
| Alliant Reloder-7 | <<locked>> | 80% | 39,914 psi | 81% | 2956 fps | 99.4% |
| Baschieri & Pellagri 106 | <<locked>> | 80% | 35,201 psi | 71% | 2802 fps | 96% |
| Hodgdon H322 | 23.1 gr | 86% | 35,244 psi | 71% | 2917 fps | 95.2% |
| Hodgdon H335 | <<locked>> | 84% | 38,406 psi | 78% | 2989 fps | 95.2% |
| Hodgdon H4198 | <<locked>> | 80% | 38,218 psi | 78% | 2884 fps | 95.8% |
| Hodgdon TrailBoss | <<locked>> | 80% | 23,047 psi | 47% | 1801 fps | 100% |
| IMR 3031 | <<locked>> | 92% | 32,822 psi | 67% | 2913 fps | 95.3% |
| IMR 4198 | <<locked>> | 80% | 33,910 psi | 69% | 2835 fps | 98.6% |
| Lovex D073.6 | <<locked>> | 96% | 40,190 psi | 82% | 3051 fps | 95.1% |
| Norma 200 | <<locked>> | 80% | 36,114 psi | 73% | 2913 fps | 98.9% |
| Norma 202 | <<locked>> | 94% | 39,102 psi | 79% | 3005 fps | 95.6% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 23,090 psi | 47% | 1850 fps | 100% |
| Rottweil R 901 | <<locked>> | 92% | 40,190 psi | 82% | 2999 fps | 95.5% |
| Shooters World Match Rifle | <<locked>> | 96% | 40,190 psi | 82% | 3051 fps | 95.1% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 41,075 psi | 83% | 2766 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 84% | 39,769 psi | 81% | 3015 fps | 95.6% |
| SNPE Vectan SP 3 | 20.9 gr | 80% | 32,692 psi | 66% | 2828 fps | 95.3% |
| SNPE Vectan Tubal 3000 | <<locked>> | 92% | 39,726 psi | 81% | 2927 fps | 95.5% |
| SNPE Vectan Tubal 5000 | <<locked>> | 94% | 34,229 psi | 69% | 2808 fps | 95% |
| Somchem S335 | <<locked>> | 90% | 36,158 psi | 73% | 2864 fps | 95.5% |
| Vihtavuori N120 | <<locked>> | 80% | 36,056 psi | 73% | 2861 fps | 100% |
| Vihtavuori N130 | <<locked>> | 80% | 30,429 psi | 62% | 2720 fps | 96.4% |
| Vihtavuori N133 | <<locked>> | 86% | 29,994 psi | 61% | 2713 fps | 95.1% |
| Vihtavuori N135 | <<locked>> | 90% | 30,429 psi | 62% | 2808 fps | 95.7% |
| Vihtavuori N140 | <<locked>> | 94% | 36,796 psi | 75% | 2927 fps | 95.2% |
| Vihtavuori N540 | <<locked>> | 96% | 38,928 psi | 79% | 2995 fps | 95.4% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 36 powders for 5.6 x 50 R Mag. loaded with the .224 | 55gr | CutEdge MTAC. Alliant AR-Comp delivers the highest muzzle velocity at 3,159 fps; across all powders the maximum-charge window runs from 2,014 fps to 3,159 fps. Accurate 2495 gives the best case fill at 100 %, and 36 of the 36 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (340 MPa), the top charges use 64–90 %, leaving at least 10 % headroom. The 55.0 gr projectile in 0.224" calls for a 1:10.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Accurate 4064, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, Hodgdon H322, SNPE Vectan SP 3 rank at the top here: for 5.6 x 50 R Mag. with the .224 | 55gr | CutEdge MTAC they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.