
Load Specifications
Load data in caliber 5.6 x 50 R Mag. with .224 | 45gr | CutEdge ER Raptor bullet and 21 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-10x, Norma 200 and ADI AR 2207.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 84% | 43,729 psi | 89% | 3232 fps | 98.3% |
| Accurate 2015 | <<locked>> | 98% | 42,699 psi | 87% | 3291 fps | 97.3% |
| Accurate LT-30 | <<locked>> | 90% | 44,454 psi | 90% | 3232 fps | 96% |
| ADI AR 2207 | <<locked>> | 88% | 43,033 psi | 87% | 3320 fps | 100% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 42,134 psi | 85% | 3376 fps | 99.3% |
| Alliant Reloder-10x | <<locked>> | 94% | 43,497 psi | 88% | 3346 fps | 98.4% |
| Alliant Reloder-7 | <<locked>> | 86% | 41,887 psi | 85% | 3251 fps | 98.4% |
| Baschieri & Pellagri 106 | <<locked>> | 90% | 42,815 psi | 87% | 3196 fps | 96.1% |
| Hodgdon H322 | <<locked>> | 98% | 44,570 psi | 90% | 3369 fps | 95.8% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 30,342 psi | 62% | 2195 fps | 100% |
| IMR 4198 | <<locked>> | 92% | 42,569 psi | 86% | 3287 fps | 98.9% |
| IMR 4227 | <<locked>> | 82% | 43,279 psi | 88% | 3248 fps | 99.6% |
| Lovex S053 | <<locked>> | 82% | 42,148 psi | 85% | 3209 fps | 100% |
| Norma 200 | <<locked>> | 90% | 43,207 psi | 88% | 3323 fps | 98.9% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 30,023 psi | 61% | 2247 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 82% | 42,786 psi | 87% | 3271 fps | 99.5% |
| SNPE Vectan BA6 1/2 | <<locked>> | 86% | 43,178 psi | 88% | 3074 fps | 100% |
| SNPE Vectan SP 3 | <<locked>> | 94% | 44,295 psi | 90% | 3346 fps | 96.7% |
| Vihtavuori N120 | <<locked>> | 90% | 42,801 psi | 87% | 3264 fps | 100% |
| Vihtavuori N130 | <<locked>> | 96% | 43,120 psi | 87% | 3264 fps | 98.1% |
| Vihtavuori N133ᴾ | <<locked>> | 100% | 39,842 psi | 81% | 3189 fps | 96.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 37,855 psi | 77% | 3100 fps | 96.9% |
| Accurate 2015 | <<locked>> | 94% | 37,130 psi | 75% | 3166 fps | 95.6% |
| Accurate LT-30 | <<locked>> | 88% | 41,887 psi | 85% | 3176 fps | 95.3% |
| ADI AR 2207 | 20.7 gr | 80% | 32,851 psi | 67% | 3084 fps | 98.8% |
| Alliant AR-Comp | <<locked>> | 90% | 30,139 psi | 61% | 3045 fps | 95.4% |
| Alliant Reloder-10x | 22.5 gr | 86% | 33,388 psi | 68% | 3100 fps | 95.5% |
| Alliant Reloder-7 | <<locked>> | 80% | 34,403 psi | 70% | 3068 fps | 96.4% |
| Baschieri & Pellagri 106 | <<locked>> | 88% | 40,045 psi | 81% | 3136 fps | 95.2% |
| Hodgdon H322 | <<locked>> | 96% | 41,959 psi | 85% | 3310 fps | 95% |
| Hodgdon TrailBoss | <<locked>> | 80% | 22,321 psi | 45% | 1982 fps | 100% |
| IMR 4198 | <<locked>> | 82% | 31,749 psi | 64% | 3009 fps | 95.7% |
| IMR 4227 | <<locked>> | 80% | 40,640 psi | 82% | 3192 fps | 99.3% |
| Lovex S053 | <<locked>> | 80% | 39,668 psi | 80% | 3156 fps | 100% |
| Norma 200 | 21.7 gr | 80% | 30,821 psi | 63% | 3012 fps | 95.4% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 21,799 psi | 44% | 2018 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 80% | 39,711 psi | 81% | 3202 fps | 99.1% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 36,738 psi | 75% | 2953 fps | 100% |
| SNPE Vectan SP 3 | <<locked>> | 90% | 39,102 psi | 79% | 3225 fps | 95.2% |
| Vihtavuori N120 | <<locked>> | 80% | 30,676 psi | 62% | 2982 fps | 99.1% |
| Vihtavuori N130 | <<locked>> | 88% | 33,721 psi | 68% | 3041 fps | 95.4% |
| Vihtavuori N133 | <<locked>> | 98% | 37,492 psi | 76% | 3136 fps | 95.5% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 21 powders for 5.6 x 50 R Mag. loaded with the .224 | 45gr | CutEdge ER Raptor. Alliant AR-Comp delivers the highest muzzle velocity at 3,376 fps; across all powders the maximum-charge window runs from 2,195 fps to 3,376 fps. Alliant AR-Comp gives the best case fill at 100 %, and 21 of the 21 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (340 MPa), the top charges use 61–90 %, leaving at least 10 % headroom. The 45.0 gr projectile in 0.224" calls for a 1:9.0 twist; slower twists will usually not stabilise this weight. Alliant AR-Comp, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-10x, Norma 200, ADI AR 2207 rank at the top here: for 5.6 x 50 R Mag. with the .224 | 45gr | CutEdge ER Raptor they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.