Load data for 5.45 x 39 mm + .224 | 50gr | Nosler Ballistic Tip Lead Free

5.45 x 39 mm cartridge drawing
Nosler logo

Load Specifications

Bullet Manufacturer:Nosler
Bullet Weight:50 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.562"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:27 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:26.3"
Max. allowed Pressure:55,114 psi
Recommended Twist Rate:1:8.5

Load data in caliber 5.45 x 39 mm with .224 | 50gr | Nosler Ballistic Tip Lead Free bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2219, ADI AR 2207 and Norma 200.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26.3"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>88%47,239 psi86%3100 fps99.3%
Accurate 2015ᴾ<<locked>>100%42,351 psi77%3100 fps97.9%
Accurate 2460ᴾ<<locked>>100%47,413 psi86%3199 fps96%
Accurate LT-30<<locked>>94%47,805 psi87%3097 fps97.5%
ADI AR 2207<<locked>>94%48,936 psi89%3225 fps100%
ADI AR 2219<<locked>>96%47,572 psi86%3235 fps97.3%
Alliant AR-Compᴾ<<locked>>100%39,102 psi71%3123 fps99.3%
Alliant Reloder-10xᴾ<<locked>>100%49,226 psi89%3261 fps99.6%
Alliant Reloder-7<<locked>>92%47,776 psi87%3166 fps99.7%
Baschieri & Pellagri 106<<locked>>96%49,255 psi89%3130 fps98.1%
Hodgdon H322ᴾ<<locked>>100%49,023 psi89%3261 fps97.6%
Hodgdon H335<<locked>>98%47,166 psi86%3219 fps96.2%
Hodgdon H4198<<locked>>90%46,485 psi84%3097 fps96.6%
Hodgdon TrailBossᴾ<<locked>>100%30,052 psi55%1995 fps100%
IMR 4198<<locked>>98%48,414 psi88%3196 fps99.9%
IMR 4227<<locked>>88%49,458 psi90%3146 fps100%
Lovex S053<<locked>>88%48,109 psi87%3104 fps100%
Norma 200<<locked>>96%49,255 psi89%3241 fps99.9%
ReloadSwiss RS 14ᴾ<<locked>>100%29,907 psi54%2047 fps100%
ReloadSwiss RS 36<<locked>>88%49,211 psi89%3182 fps100%
SNPE Vectan BA6 1/2<<locked>>92%48,979 psi89%2949 fps100%
SNPE Vectan SP 10<<locked>>96%47,993 psi87%3235 fps96.3%
SNPE Vectan SP 3<<locked>>98%47,384 psi86%3205 fps98.1%
Vihtavuori N110<<locked>>82%46,992 psi85%3009 fps100%
Vihtavuori N120<<locked>>94%49,095 psi89%3169 fps100%
Vihtavuori N130ᴾ<<locked>>100%47,166 psi86%3143 fps99.2%
Vihtavuori N133ᴾ<<locked>>100%40,770 psi74%3022 fps97.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26.3"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%35,868 psi65%2871 fps97.2%
Accurate 2015<<locked>>94%34,708 psi63%2933 fps95.9%
Accurate 2460<<locked>>98%43,947 psi80%3133 fps95.2%
Accurate LT-30<<locked>>88%39,653 psi72%2936 fps95.5%
ADI AR 220716.9 gr80%30,864 psi56%2851 fps99%
ADI AR 221921.5 gr92%41,698 psi76%3117 fps95.9%
Alliant AR-Comp<<locked>>90%28,282 psi51%2825 fps95.7%
Alliant Reloder-10x<<locked>>86%31,227 psi57%2871 fps95.9%
Alliant Reloder-7<<locked>>80%32,576 psi59%2841 fps96.8%
Baschieri & Pellagri 106<<locked>>88%37,463 psi68%2904 fps95.3%
Hodgdon H322<<locked>>94%40,480 psi73%3091 fps95.5%
Hodgdon H335<<locked>>96%43,859 psi80%3153 fps95.3%
Hodgdon H4198<<locked>>86%40,828 psi74%2982 fps95.1%
Hodgdon TrailBoss<<locked>>80%21,973 psi40%1791 fps100%
IMR 4198<<locked>>80%28,166 psi51%2717 fps95.2%
IMR 4227<<locked>>80%38,827 psi70%2946 fps99.5%
Lovex S053<<locked>>80%37,463 psi68%2907 fps100%
Norma 20017.7 gr80%28,689 psi52%2785 fps95.7%
ReloadSwiss RS 14<<locked>>80%21,524 psi39%1827 fps100%
ReloadSwiss RS 36<<locked>>80%37,782 psi69%2963 fps99.3%
SNPE Vectan BA6 1/2<<locked>>80%35,360 psi64%2720 fps100%
SNPE Vectan SP 10<<locked>>94%44,672 psi81%3169 fps95.5%
SNPE Vectan SP 3<<locked>>90%36,825 psi67%2986 fps95.4%
Vihtavuori N110<<locked>>80%44,150 psi80%2966 fps100%
Vihtavuori N120<<locked>>80%31,096 psi56%2818 fps99.7%
Vihtavuori N130<<locked>>86%30,284 psi55%2772 fps95.1%
Vihtavuori N133<<locked>>94%33,779 psi61%2861 fps95.1%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for 5.45 x 39 mm loaded with the .224 | 50gr | Nosler Ballistic Tip Lead Free. Alliant Reloder-10x delivers the highest muzzle velocity at 3,261 fps; across all powders the maximum-charge window runs from 1,995 fps to 3,261 fps. Accurate 2015 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (380 MPa), the top charges use 54–90 %, leaving at least 10 % headroom. The 50.0 gr projectile in 0.224" calls for a 1:8.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2460, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2219, ADI AR 2207, Norma 200 rank at the top here: for 5.45 x 39 mm with the .224 | 50gr | Nosler Ballistic Tip Lead Free they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data