Load data for 5.45 x 39 mm + .223 | 52gr | SUS-TAC HP

5.45 x 39 mm cartridge drawing
SUS-TAC logo

Load Specifications

Bullet Manufacturer:SUS-TAC
Bullet Weight:52 gr
Bullet Diameter:0.223"
Bullet Length:<<locked>>
Case Length (l3):1.562"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:27 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:26.3"
Max. allowed Pressure:55,114 psi
Recommended Twist Rate:1:10.0

Load data in caliber 5.45 x 39 mm with .223 | 52gr | SUS-TAC HP bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2219, Norma 200 and Hodgdon H322.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26.3"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>88%47,747 psi87%3035 fps99.4%
Accurate 2015ᴾ<<locked>>100%42,554 psi77%3028 fps98%
Accurate 2460ᴾ<<locked>>100%48,153 psi87%3133 fps96.2%
Accurate LT-30<<locked>>94%48,080 psi87%3028 fps97.5%
ADI AR 2207<<locked>>94%49,197 psi89%3146 fps100%
ADI AR 2219<<locked>>96%48,428 psi88%3173 fps97.5%
Alliant AR-Compᴾ<<locked>>100%39,871 psi72%3064 fps99.4%
Alliant Reloder-10xᴾ<<locked>>100%49,255 psi89%3182 fps99.6%
Alliant Reloder-7<<locked>>92%48,950 psi89%3107 fps99.7%
Baschieri & Pellagri 106<<locked>>96%49,559 psi90%3061 fps98.2%
Hodgdon H322<<locked>>98%46,267 psi84%3133 fps97.1%
Hodgdon H335<<locked>>98%47,630 psi86%3153 fps96.3%
Hodgdon H4198<<locked>>90%47,311 psi86%3035 fps96.8%
Hodgdon TrailBossᴾ<<locked>>100%30,400 psi55%1939 fps100%
IMR 4198<<locked>>98%48,573 psi88%3120 fps99.9%
IMR 4227<<locked>>86%46,978 psi85%3028 fps100%
Lovex S053<<locked>>88%48,631 psi88%3031 fps100%
Norma 200<<locked>>94%46,586 psi85%3117 fps99.7%
ReloadSwiss RS 14ᴾ<<locked>>100%30,414 psi55%1988 fps100%
ReloadSwiss RS 36<<locked>>88%49,298 psi89%3104 fps100%
SNPE Vectan BA6 1/2<<locked>>92%49,240 psi89%2874 fps100%
SNPE Vectan SP 10<<locked>>96%48,356 psi88%3166 fps96.4%
SNPE Vectan SP 3<<locked>>98%47,877 psi87%3136 fps98.2%
Vihtavuori N110<<locked>>82%47,834 psi87%2940 fps100%
Vihtavuori N120<<locked>>94%49,356 psi90%3097 fps100%
Vihtavuori N130ᴾ<<locked>>100%47,906 psi87%3081 fps99.3%
Vihtavuori N133ᴾ<<locked>>100%41,437 psi75%2963 fps97.5%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26.3"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%36,622 psi66%2815 fps97.5%
Accurate 2015<<locked>>92%33,315 psi60%2825 fps95.4%
Accurate 2460<<locked>>98%44,585 psi81%3071 fps95.3%
Accurate LT-30<<locked>>88%40,408 psi73%2877 fps95.7%
ADI AR 2207<<locked>>80%31,879 psi58%2802 fps99.3%
ADI AR 221920.2 gr90%39,334 psi71%2989 fps95.2%
Alliant AR-Comp<<locked>>88%27,122 psi49%2713 fps95.1%
Alliant Reloder-10x<<locked>>84%30,168 psi55%2769 fps95.5%
Alliant Reloder-7<<locked>>80%33,794 psi61%2795 fps97.2%
Baschieri & Pellagri 106<<locked>>88%38,058 psi69%2844 fps95.5%
Hodgdon H32220.4 gr94%40,480 psi73%3015 fps95.5%
Hodgdon H335<<locked>>96%44,324 psi80%3091 fps95.5%
Hodgdon H4198<<locked>>86%41,437 psi75%2920 fps95.3%
Hodgdon TrailBoss<<locked>>80%22,582 psi41%1745 fps100%
IMR 4198<<locked>>80%28,906 psi52%2667 fps95.7%
IMR 4227<<locked>>80%39,030 psi71%2874 fps99.6%
Lovex S053<<locked>>80%38,276 psi69%2844 fps100%
Norma 20017 gr80%29,646 psi54%2740 fps96.2%
ReloadSwiss RS 14<<locked>>80%22,234 psi40%1785 fps100%
ReloadSwiss RS 36<<locked>>80%38,319 psi70%2897 fps99.4%
SNPE Vectan BA6 1/2<<locked>>80%35,926 psi65%2657 fps100%
SNPE Vectan SP 10<<locked>>94%45,585 psi83%3114 fps95.8%
SNPE Vectan SP 3<<locked>>90%37,086 psi67%2913 fps95.6%
Vihtavuori N110<<locked>>80%44,889 psi81%2894 fps100%
Vihtavuori N120<<locked>>80%32,097 psi58%2769 fps99.8%
Vihtavuori N130<<locked>>86%31,067 psi56%2723 fps95.5%
Vihtavuori N133<<locked>>94%34,722 psi63%2812 fps95.5%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for 5.45 x 39 mm loaded with the .223 | 52gr | SUS-TAC HP. Alliant Reloder-10x delivers the highest muzzle velocity at 3,182 fps; across all powders the maximum-charge window runs from 1,939 fps to 3,182 fps. Accurate 2015 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (380 MPa), the top charges use 55–90 %, leaving at least 10 % headroom. The 52.0 gr projectile in 0.223" calls for a 1:10.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2460, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2219, Norma 200, Hodgdon H322 rank at the top here: for 5.45 x 39 mm with the .223 | 52gr | SUS-TAC HP they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data