Load data for .510 DTC + .510 | 762gr | CutEdge MTAC

.510 DTC cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:762 gr
Bullet Diameter:0.51"
Bullet Length:<<locked>>
Case Length (l3):3.785"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:300 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:29"
Max. allowed Pressure:52,214 psi
Recommended Twist Rate:1:17.5

Load data in caliber .510 DTC with .510 | 762gr | CutEdge MTAC bullet and 28 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2218, Alliant Reloder-50 and Alliant Reloder-33.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 29"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>98%46,572 psi89%2484 fps99.2%
ADI AR 2217<<locked>>86%44,324 psi85%2411 fps100%
ADI AR 2218<<locked>>92%46,949 psi90%2579 fps99.8%
ADI AR 2225<<locked>>90%46,934 psi90%2484 fps100%
Alliant Reloder-25<<locked>>82%44,831 psi86%2402 fps100%
Alliant Reloder-33<<locked>>88%45,165 psi87%2500 fps99.4%
Alliant Reloder-50<<locked>>92%44,875 psi86%2500 fps99.1%
Bofors RP30<<locked>>84%44,585 psi85%2425 fps100%
Hodgdon H1000<<locked>>84%45,194 psi87%2418 fps100%
Hodgdon Retumbo<<locked>>82%44,077 psi84%2477 fps100%
Hodgdon TrailBossᴾ<<locked>>100%38,072 psi73%1558 fps100%
IMR 7977 Enduron<<locked>>84%46,456 psi89%2352 fps97.1%
IMR 8133 Enduron<<locked>>92%46,311 psi89%2477 fps100%
Lovex D100<<locked>>88%45,977 psi88%2395 fps96%
Lovex S071<<locked>>82%44,570 psi85%2310 fps100%
Norma 217<<locked>>90%44,222 psi85%2444 fps100%
Ramshot LRT<<locked>>92%47,007 psi90%2520 fps96.2%
Ramshot Magnum<<locked>>82%46,093 psi88%2405 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%39,160 psi75%1598 fps100%
ReloadSwiss RS 76<<locked>>84%47,007 psi90%2513 fps100%
ReloadSwiss RS 80<<locked>>86%46,195 psi88%2497 fps100%
Shooters World 50 BMG<<locked>>88%45,977 psi88%2395 fps96%
SNPE Vectan SP 13<<locked>>96%45,368 psi87%2438 fps98.7%
Vihtavuori 20N29ᴾ<<locked>>100%45,310 psi87%2467 fps97.5%
Vihtavuori N170<<locked>>84%45,107 psi86%2385 fps98.2%
Vihtavuori N565<<locked>>82%46,050 psi88%2431 fps100%
Vihtavuori N568<<locked>>86%47,239 psi90%2500 fps100%
Vihtavuori N570<<locked>>86%45,107 psi86%2507 fps99.2%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 29"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>88%32,460 psi62%2211 fps95.4%
ADI AR 2217<<locked>>80%35,940 psi69%2260 fps99.7%
ADI AR 2218206.9 gr82%32,692 psi63%2277 fps96.1%
ADI AR 2225<<locked>>80%33,127 psi63%2241 fps100%
Alliant Reloder-25<<locked>>80%41,829 psi80%2356 fps100%
Alliant Reloder-33205.6 gr80%33,518 psi64%2270 fps96.6%
Alliant Reloder-50215.2 gr84%33,344 psi64%2267 fps95.9%
Bofors RP30<<locked>>80%38,899 psi75%2326 fps99.9%
Hodgdon H1000<<locked>>80%39,160 psi75%2320 fps100%
Hodgdon Retumbo<<locked>>80%41,002 psi79%2428 fps100%
Hodgdon TrailBoss<<locked>>80%28,645 psi55%1391 fps100%
IMR 7977 Enduron<<locked>>80%40,814 psi78%2254 fps95.6%
IMR 8133 Enduron<<locked>>80%30,705 psi59%2178 fps98.7%
Lovex D100<<locked>>86%42,844 psi82%2343 fps95.1%
Lovex S071<<locked>>80%41,814 psi80%2267 fps100%
Norma 217<<locked>>80%31,125 psi60%2198 fps99.9%
Ramshot LRT<<locked>>90%43,787 psi84%2461 fps95.2%
Ramshot Magnum<<locked>>80%42,801 psi82%2356 fps100%
ReloadSwiss RS 14<<locked>>80%29,457 psi56%1424 fps100%
ReloadSwiss RS 76<<locked>>80%40,277 psi77%2408 fps100%
ReloadSwiss RS 80<<locked>>80%36,869 psi71%2329 fps99.2%
Shooters World 50 BMG<<locked>>86%42,844 psi82%2343 fps95.1%
SNPE Vectan SP 13<<locked>>88%34,519 psi66%2234 fps95.9%
Vihtavuori 20N29<<locked>>96%39,276 psi75%2359 fps95.8%
Vihtavuori N170<<locked>>80%39,378 psi75%2280 fps96.8%
Vihtavuori N565<<locked>>80%43,004 psi82%2382 fps100%
Vihtavuori N568<<locked>>80%38,116 psi73%2339 fps99.1%
Vihtavuori N570<<locked>>80%36,260 psi69%2336 fps97.1%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 28 powders for .510 DTC loaded with the .510 | 762gr | CutEdge MTAC. ADI AR 2218 delivers the highest muzzle velocity at 2,579 fps; across all powders the maximum-charge window runs from 1,558 fps to 2,579 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 28 of the 28 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (360 MPa), the top charges use 73–90 %, leaving at least 10 % headroom. The 762.0 gr projectile in 0.51" calls for a 1:17.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14, Vihtavuori 20N29 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2218, Alliant Reloder-50, Alliant Reloder-33 rank at the top here: for .510 DTC with the .510 | 762gr | CutEdge MTAC they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data