Load data for .50 Beowolf + .500 | 450gr | CutEdge DGBR

.50 Beowolf cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:450 gr
Bullet Diameter:0.5"
Bullet Length:<<locked>>
Case Length (l3):1.65"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:69 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:16"
Max. allowed Pressure:33,359 psi

Load data in caliber .50 Beowolf with .500 | 450gr | CutEdge DGBR bullet and 5 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N110, SNPE Vectan BA6 1/2 and ReloadSwiss RS 14.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 16"

PowderChargeFRMaxP%V(0)z
Hodgdon LilGun<<locked>>82%29,486 psi88%1503 fps99.5%
Hodgdon TrailBossᴾ<<locked>>100%24,033 psi72%935 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%22,887 psi69%955 fps100%
SNPE Vectan BA6 1/2<<locked>>98%29,863 psi90%1404 fps99.9%
Vihtavuori N110<<locked>>90%29,849 psi89%1437 fps99.2%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 16"

PowderChargeFRMaxP%V(0)z
Hodgdon LilGun<<locked>>80%27,572 psi83%1473 fps99.2%
Hodgdon TrailBoss<<locked>>80%17,202 psi52%830 fps100%
ReloadSwiss RS 149.7 gr80%16,505 psi49%850 fps100%
SNPE Vectan BA6 1/223.1 gr80%18,420 psi55%1198 fps96.5%
Vihtavuori N11024.2 gr80%22,162 psi66%1309 fps96.8%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 5 powders for .50 Beowolf loaded with the .500 | 450gr | CutEdge DGBR. Hodgdon LilGun delivers the highest muzzle velocity at 1,503 fps; across all powders the maximum-charge window runs from 935 fps to 1,503 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 5 of the 5 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (230 MPa), the top charges use 69–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N110, SNPE Vectan BA6 1/2, ReloadSwiss RS 14 rank at the top here: for .50 Beowolf with the .500 | 450gr | CutEdge DGBR they combine a high case fill with complete burn and sit in the upper velocity band. Hodgdon TrailBoss, ReloadSwiss RS 14 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data