Load Specifications
Load data in caliber .455 MK II with .452 | 200gr | H&N KS HS bullet and 7 powders. The key underlying parameters are shown in the table above.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 4"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Baschieri & Pellagri 102 Pistol² | <<locked>> | 76% | 10,718 psi | 82% | 758 fps | 97% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 7,658 psi | 59% | 643 fps | 95.9% |
| Maxam CSB 1*² | <<locked>> | 64% | 11,284 psi | 86% | 751 fps | 90.7% |
| Maxam CSB 2² | <<locked>> | 68% | 11,385 psi | 87% | 807 fps | 96.7% |
| ReloadSwiss RS 14*ᴾ | <<locked>> | 100% | 6,483 psi | 50% | 614 fps | 88.3% |
| Vihtavuori N32C Tin Star | <<locked>> | 84% | 10,443 psi | 80% | 728 fps | 100% |
| Winchester AutoComp *² | <<locked>> | 64% | 11,313 psi | 87% | 764 fps | 89.2% |
Start Load - Barrel Length: 4"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Baschieri & Pellagri 102 Pistol*² | <<locked>> | 60% | 6,570 psi | 50% | 620 fps | 89% |
| Hodgdon TrailBoss*² | <<locked>> | 72% | 4,438 psi | 34% | 509 fps | 86.2% |
| Maxam CSB 1*² | <<locked>> | 60% | 9,964 psi | 76% | 715 fps | 88.5% |
| Maxam CSB 2*² | <<locked>> | 60% | 8,702 psi | 67% | 725 fps | 92.7% |
| ReloadSwiss RS 14* | <<locked>> | 92% | 5,685 psi | 44% | 581 fps | 85.6% |
| Vihtavuori N32C Tin Star² | <<locked>> | 60% | 5,555 psi | 43% | 574 fps | 95.9% |
| Winchester AutoComp *² | <<locked>> | 60% | 9,790 psi | 75% | 722 fps | 86.4% |
* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.
² fill rate low - you might want to consider using a filler to ensure proper ignition.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 2 powders for .455 MK II loaded with the .452 | 200gr | H&N KS HS. Vihtavuori N32C Tin Star delivers the highest muzzle velocity at 728 fps; across all powders the maximum-charge window runs from 643 fps to 728 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 2 of the 2 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (90 MPa), the top charges use 59–80 %, leaving at least 20 % headroom. Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon TrailBoss, Vihtavuori N32C Tin Star stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.