
Load Specifications
Load data in caliber .450 Marlin with .458 | 250gr | CutEdge DGBR-HP bullet and 9 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Accurate No. 11 FS, Vihtavuori N110 and ADI AR 2205.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate No. 11 FS | <<locked>> | 90% | 40,959 psi | 86% | 2395 fps | 96.8% |
| ADI AR 2205 | <<locked>> | 92% | 41,423 psi | 87% | 2323 fps | 98.5% |
| Hodgdon LilGun | <<locked>> | 88% | 42,627 psi | 89% | 2510 fps | 100% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 24,918 psi | 52% | 1460 fps | 100% |
| Lovex S040 | <<locked>> | 86% | 43,149 psi | 90% | 2359 fps | 100% |
| Lovex S053ᴾ | <<locked>> | 100% | 37,782 psi | 79% | 2365 fps | 98% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 24,105 psi | 50% | 1496 fps | 100% |
| SNPE Vectan BA6 1/2ᴾ | <<locked>> | 100% | 35,201 psi | 74% | 2234 fps | 100% |
| Vihtavuori N110 | <<locked>> | 98% | 42,641 psi | 89% | 2411 fps | 100% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate No. 11 FS | 44.4 gr | 86% | 35,969 psi | 75% | 2306 fps | 95.5% |
| ADI AR 2205 | 38 gr | 80% | 28,848 psi | 60% | 2077 fps | 95.1% |
| Hodgdon LilGun | <<locked>> | 80% | 31,995 psi | 67% | 2329 fps | 100% |
| Hodgdon TrailBoss | <<locked>> | 80% | 18,043 psi | 38% | 1306 fps | 100% |
| Lovex S040 | <<locked>> | 80% | 35,940 psi | 75% | 2241 fps | 99.9% |
| Lovex S053 | <<locked>> | 90% | 28,253 psi | 59% | 2165 fps | 95% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 17,245 psi | 36% | 1329 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 20,479 psi | 43% | 1900 fps | 98.5% |
| Vihtavuori N110 | 34.2 gr | 80% | 24,889 psi | 52% | 2067 fps | 98.7% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 9 powders for .450 Marlin loaded with the .458 | 250gr | CutEdge DGBR-HP. Hodgdon LilGun delivers the highest muzzle velocity at 2,510 fps; across all powders the maximum-charge window runs from 1,460 fps to 2,510 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 9 of the 9 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (330 MPa), the top charges use 50–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, Lovex S053, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Accurate No. 11 FS, Vihtavuori N110, ADI AR 2205 rank at the top here: for .450 Marlin with the .458 | 250gr | CutEdge DGBR-HP they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.