Load data for .45 Auto Rim + .452 | 230gr | Sellier & Bellot FMJ

.45 Auto Rim cartridge drawing
Sellier & Bellot logo

Load Specifications

Bullet Manufacturer:Sellier & Bellot
Bullet Weight:230 gr
Bullet Diameter:0.452"
Bullet Length:<<locked>>
Case Length (l3):0.898"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:29 Grains of Water
Primer Size:Large Pistol (LP)
Barrel Length:5"
Max. allowed Pressure:17,405 psi

Load data in caliber .45 Auto Rim with .452 | 230gr | Sellier & Bellot FMJ bullet and 6 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon TrailBoss and ReloadSwiss RS 14.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 5"

PowderChargeFRMaxP%V(0)z
Alliant Herco²<<locked>>72%14,924 psi86%883 fps95%
Baschieri & Pellagri 102 Pistol²<<locked>>72%14,721 psi85%846 fps100%
Hodgdon TrailBossᴾ<<locked>>100%11,995 psi69%745 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%10,805 psi62%741 fps99.7%
ReloadSwiss RS 20²<<locked>>64%14,910 psi86%902 fps97.1%
Vihtavuori N32C Tin Star<<locked>>80%15,040 psi86%801 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 5"

PowderChargeFRMaxP%V(0)z
Alliant Herco*²<<locked>>60%11,124 psi64%778 fps90.3%
Baschieri & Pellagri 102 Pistol²<<locked>>60%10,544 psi61%748 fps99.9%
Hodgdon TrailBoss²3.1 gr60%5,671 psi33%541 fps96.9%
ReloadSwiss RS 14*²3.2 gr60%5,410 psi31%538 fps91.9%
ReloadSwiss RS 20²<<locked>>60%13,256 psi76%860 fps95.6%
Vihtavuori N32C Tin Star²<<locked>>60%9,340 psi54%676 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 2 powders for .45 Auto Rim loaded with the .452 | 230gr | Sellier & Bellot FMJ. Hodgdon TrailBoss delivers the highest muzzle velocity at 745 fps; across all powders the maximum-charge window runs from 741 fps to 745 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 2 of the 2 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (120 MPa), the top charges use 62–69 %, leaving at least 31 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon TrailBoss, ReloadSwiss RS 14 rank at the top here: for .45 Auto Rim with the .452 | 230gr | Sellier & Bellot FMJ they combine a high case fill with complete burn and sit in the upper velocity band. Hodgdon TrailBoss, ReloadSwiss RS 14 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data