Load data for .45 Auto (ACP) + .452 | 150gr | CutEdge HGHP

Recommended Powder(s): Vihtavuori N320

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.452 \| 150gr \| CutEdge HGHP
Manufacturer SKU:	HGHP 45 150
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.452" \| 11.48mm
Bullet Length:	0.624" \| 15.8mm
Caliber:	.45 Auto (ACP) load data
Case Length (l3):	0.898" \| 22.8mm
Cartridge Length (C.O.L.):	1.256" \| 31.9mm
Seated Depth:	0.266" \| 6.8mm
Shank Seated Depth:	0.266" \| 6.8mm
Case Capacity:	25.0 Grains of Water \| 1.62 cm³
Primer Size:	Large Pistol (LP)
Max. allowed Pressure:	18855 psi \| 1300 bar
LID:	LID_B8613_C724
Last updated:	2025-01-01

Load data for 56 loads in caliber .45 Auto (ACP) with .452 | 150gr | CutEdge HGHP bullet and 28 powders such as Vihtavuori N320. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AS 30	<<locked>>	66%	16824	89%	**33	100%
ADI AS 50N	<<locked>>	65%	16824	89%	**63	99%
[Accurate No. 2]*	<<locked>>	67%	15592	83%	**27	82%
Accurate Solo 1000	<<locked>>	66%	16824	89%	**43	99%
Accurate Solo 1250	<<locked>>	77%	16795	89%	**93	95%
[Alliant BULLSEYE]*	<<locked>>	64%	16143	86%	**93	88%
[Alliant UNIQUE]*	<<locked>>	75%	15679	83%	**96	87%
Baschieri & Pellagri 100	<<locked>>	69%	16041	85%	**37	98%
Hodgdon Universal	<<locked>>	68%	16056	85%	**89	95%
Hodgdon TrailBoss	<<locked>>	94%	8209	44%	**4	95%
Lovex S020	<<locked>>	71%	16433	87%	**99	90%
Maxam CSB 1	<<locked>>	77%	16114	85%	**73	94%
Maxam CSB 2	<<locked>>	81%	16737	89%	**55	99%
Maxam CSB 3	<<locked>>	69%	15432	82%	**50	98%
Maxam CSB 4	<<locked>>	69%	16882	90%	**70	100%
[Ramshot Silhouette]*	<<locked>>	64%	16534	88%	**99	84%
ReloadSwiss RS 12	<<locked>>	69%	16230	86%	**35	100%
[ReloadSwiss RS 14]*	<<locked>>	96%	7745	41%	**4	89%
ReloadSwiss RS 20	<<locked>>	82%	16853	89%	**45	91%
[SNPE Vectan A0]*	<<locked>>	75%	15925	84%	**43	86%
SNPE Vectan BA 9	<<locked>>	68%	16056	85%	**47	92%
SNPE Vectan BA9 1/2	<<locked>>	69%	15795	84%	**66	94%
[Somchem MP200]*	<<locked>>	70%	16882	90%	**02	86%
[Somchem MS200]*	<<locked>>	72%	16230	86%	**73	89%
Vihtavuori N320 👍	<<locked>>	68%	15664	83%	**76	100%
Vihtavuori N32C Tin Star	<<locked>>	94%	16128	86%	**43	100%
Vihtavuori N330	<<locked>>	76%	16563	88%	**42	97%
[Vihtavuori N340]*	<<locked>>	75%	15635	83%	**76	87%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AS 30	<<locked>>	62%	14968	79%	**1	100%
ADI AS 50N	<<locked>>	61%	14982	79%	**17	98%
[Accurate No. 2]*	<<locked>>	64%	13953	74%	**4	80%
Accurate Solo 1000	<<locked>>	62%	15040	80%	**01	99%
[Accurate Solo 1250]*	<<locked>>	61%	11298	60%	**2	88%
[Alliant BULLSEYE]*	<<locked>>	60%	14620	78%	**43	86%
[Alliant UNIQUE]*	<<locked>>	64%	11879	63%	**8	81%
Baschieri & Pellagri 100	<<locked>>	61%	12865	68%	**1	95%
Hodgdon Universal	<<locked>>	60%	13213	70%	**01	92%
Hodgdon TrailBoss	<<locked>>	73%	6106	32%	**9	90%
[Lovex S020]*	<<locked>>	61%	12212	65%	**4	85%
[Maxam CSB 1]*	<<locked>>	62%	10849	58%	**2	88%
Maxam CSB 2	<<locked>>	62%	9892	52%	**8	93%
Maxam CSB 3	<<locked>>	61%	12618	67%	**1	95%
Maxam CSB 4	<<locked>>	60%	13590	72%	**4	98%
[Ramshot Silhouette]*	<<locked>>	61%	15185	81%	**63	83%
ReloadSwiss RS 12	<<locked>>	62%	13155	70%	**53	99%
[ReloadSwiss RS 14]*	<<locked>>	75%	5918	31%	**6	84%
[ReloadSwiss RS 20]*	<<locked>>	65%	10805	57%	**8	80%
[SNPE Vectan A0]*	<<locked>>	64%	12038	64%	**5	81%
[SNPE Vectan BA 9]*	<<locked>>	61%	13431	71%	**1	89%
SNPE Vectan BA9 1/2	<<locked>>	62%	13111	70%	**4	91%
[Somchem MP200]*	<<locked>>	61%	12720	67%	**1	81%
[Somchem MS200]*	<<locked>>	61%	12517	66%	**5	84%
Vihtavuori N320	<<locked>>	60%	12560	67%	**8	98%
Vihtavuori N32C Tin Star	<<locked>>	61%	7789	41%	**4	99%
Vihtavuori N330	<<locked>>	61%	11356	60%	**8	90%
[Vihtavuori N340]*	<<locked>>	64%	11777	62%	**1	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.