Load data for .44-40 WCF + .430 | 180gr | ACME FP COATED

.44-40 WCF cartridge drawing
ACME logo

Load Specifications

Bullet Manufacturer:ACME
Bullet Weight:180 gr
Bullet Diameter:0.43"
Bullet Length:<<locked>>
Case Length (l3):1.305"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:40 Grains of Water
Primer Size:Large Pistol Magnum (LPM)
Barrel Length:5.5"
Max. allowed Pressure:15,954 psi

Load data in caliber .44-40 WCF with .430 | 180gr | ACME FP COATED bullet and 2 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 5.5"

PowderChargeFRMaxP%V(0)z
Hodgdon TrailBoss<<locked>>88%13,996 psi88%958 fps100%
ReloadSwiss RS 14<<locked>>92%14,083 psi88%991 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 5.5"

PowderChargeFRMaxP%V(0)z
Hodgdon TrailBoss²5.5 gr60%8,035 psi50%771 fps100%
ReloadSwiss RS 14²5.6 gr60%7,556 psi47%764 fps98.9%

Recommended = one of the top powders for this cartridge and bullet combination.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

<<locked>> you need an access license to unlock this data.

This overview compares 2 powders for .44-40 WCF loaded with the .430 | 180gr | ACME FP COATED. ReloadSwiss RS 14 delivers the highest muzzle velocity at 991 fps; across all powders the maximum-charge window runs from 958 fps to 991 fps. ReloadSwiss RS 14 gives the best case fill at 92 %, and 2 of the 2 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (110 MPa), the top charges use 88–88 %, leaving at least 12 % headroom. ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for .44-40 WCF with the .430 | 180gr | ACME FP COATED they combine a high case fill with complete burn and sit in the upper velocity band. Hodgdon TrailBoss, ReloadSwiss RS 14 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data