Load data for .405 Win. + .416 | 225gr | CutEdge DGBR-HP

.405 Win. cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:225 gr
Bullet Diameter:0.416"
Bullet Length:<<locked>>
Case Length (l3):2.58"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:78 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:46,000 psi

Load data in caliber .405 Win. with .416 | 225gr | CutEdge DGBR-HP bullet and 15 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Norma 200, ADI AR 2207 and Alliant Reloder-7.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>88%40,030 psi87%2470 fps97%
ADI AR 2207<<locked>>94%40,567 psi88%2579 fps99.8%
Alliant Reloder-10xᴾ<<locked>>100%40,074 psi87%2592 fps97.4%
Alliant Reloder-7<<locked>>92%40,509 psi88%2530 fps97.8%
Hodgdon TrailBossᴾ<<locked>>100%29,124 psi63%1585 fps100%
IMR 4198<<locked>>98%41,336 psi90%2549 fps98.3%
IMR 4227<<locked>>86%40,495 psi88%2477 fps99.2%
Lovex S053<<locked>>88%41,379 psi90%2490 fps100%
Norma 200<<locked>>96%39,798 psi87%2575 fps98%
ReloadSwiss RS 14ᴾ<<locked>>100%28,601 psi62%1624 fps100%
ReloadSwiss RS 36<<locked>>86%39,276 psi85%2500 fps98.9%
SNPE Vectan BA6 1/2<<locked>>90%40,741 psi89%2349 fps100%
Vihtavuori N110<<locked>>82%41,075 psi89%2418 fps100%
Vihtavuori N120<<locked>>94%40,886 psi89%2546 fps100%
Vihtavuori N130ᴾ<<locked>>100%39,204 psi85%2503 fps96.7%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>84%35,027 psi76%2375 fps95.6%
ADI AR 220743.4 gr80%26,165 psi57%2257 fps96.8%
Alliant Reloder-10x<<locked>>94%33,127 psi72%2448 fps95.3%
Alliant Reloder-747.1 gr84%31,502 psi68%2343 fps95.2%
Hodgdon TrailBoss<<locked>>80%21,161 psi46%1414 fps100%
IMR 4198<<locked>>88%31,125 psi68%2326 fps95.2%
IMR 4227<<locked>>80%33,634 psi73%2339 fps97.8%
Lovex S053<<locked>>80%32,750 psi71%2323 fps99.7%
Norma 20049.9 gr88%30,806 psi67%2385 fps95.4%
ReloadSwiss RS 14<<locked>>80%20,740 psi45%1447 fps100%
ReloadSwiss RS 36<<locked>>80%32,430 psi71%2356 fps97.4%
SNPE Vectan BA6 1/2<<locked>>80%31,053 psi68%2182 fps100%
Vihtavuori N110<<locked>>80%38,638 psi84%2379 fps100%
Vihtavuori N120<<locked>>80%26,585 psi58%2241 fps98%
Vihtavuori N130<<locked>>96%34,621 psi75%2415 fps95.3%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .405 Win. loaded with the .416 | 225gr | CutEdge DGBR-HP. Alliant Reloder-10x delivers the highest muzzle velocity at 2,592 fps; across all powders the maximum-charge window runs from 1,585 fps to 2,592 fps. Accurate 2015 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (317 MPa), the top charges use 62–90 %, leaving at least 10 % headroom. Accurate 2015, Alliant AR-Comp, Alliant Reloder-10x reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Norma 200, ADI AR 2207, Alliant Reloder-7 rank at the top here: for .405 Win. with the .416 | 225gr | CutEdge DGBR-HP they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 2015, Accurate LT-30, Accurate LT-32 burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data