
Load Specifications
Load data in caliber .38 Special with .355 | 84gr | Inceptor RNP bullet and 19 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N32C Tin Star and Hodgdon TrailBoss.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 4"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate Solo 1250² | <<locked>> | 68% | 19,247 psi | 88% | 1247 fps | 96.9% |
| Alliant BE-86² | <<locked>> | 64% | 18,086 psi | 83% | 1214 fps | 98.2% |
| Alliant Herco* | <<locked>> | 80% | 19,145 psi | 88% | 1263 fps | 90.7% |
| Alliant UNIQUE*² | <<locked>> | 68% | 19,348 psi | 89% | 1280 fps | 90.9% |
| Baschieri & Pellagri 102 Pistol | <<locked>> | 80% | 18,681 psi | 86% | 1224 fps | 100% |
| Hodgdon Clays² | <<locked>> | 64% | 19,029 psi | 87% | 1135 fps | 100% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 12,937 psi | 59% | 1024 fps | 99.6% |
| Maxam CSB 1² | <<locked>> | 68% | 18,463 psi | 85% | 1220 fps | 96.5% |
| Maxam CSB 2² | <<locked>> | 68% | 18,753 psi | 86% | 1263 fps | 99.6% |
| Maxam CSB 3² | <<locked>> | 64% | 19,319 psi | 89% | 1234 fps | 99.5% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 11,908 psi | 55% | 1007 fps | 96.1% |
| ReloadSwiss RS 20*² | <<locked>> | 72% | 19,305 psi | 89% | 1302 fps | 93.3% |
| SNPE Vectan A0*² | <<locked>> | 68% | 18,579 psi | 85% | 1220 fps | 90.2% |
| SNPE Vectan BA9 1/2² | <<locked>> | 64% | 19,363 psi | 89% | 1247 fps | 96.7% |
| Somchem MS200*² | <<locked>> | 64% | 18,507 psi | 85% | 1234 fps | 91.6% |
| Vihtavuori N32C Tin Star | <<locked>> | 88% | 18,768 psi | 86% | 1171 fps | 100% |
| Vihtavuori N330² | <<locked>> | 64% | 19,450 psi | 89% | 1283 fps | 98.2% |
| Vihtavuori N340*² | <<locked>> | 68% | 19,667 psi | 90% | 1270 fps | 91.6% |
| Winchester AutoComp ² | <<locked>> | 68% | 18,956 psi | 87% | 1243 fps | 95.6% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 4"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate Solo 1250*² | <<locked>> | 60% | 15,461 psi | 71% | 1138 fps | 93.9% |
| Alliant BE-86² | <<locked>> | 60% | 16,186 psi | 74% | 1161 fps | 97% |
| Alliant Herco*² | <<locked>> | 68% | 14,214 psi | 65% | 1112 fps | 85.1% |
| Alliant UNIQUE*² | <<locked>> | 60% | 15,461 psi | 71% | 1158 fps | 86.6% |
| Baschieri & Pellagri 102 Pistol² | <<locked>> | 60% | 11,124 psi | 51% | 994 fps | 95.7% |
| Hodgdon Clays² | <<locked>> | 60% | 17,114 psi | 79% | 1093 fps | 100% |
| Hodgdon TrailBoss*² | 3.1 gr | 60% | 6,643 psi | 31% | 755 fps | 92.1% |
| Maxam CSB 1*² | <<locked>> | 60% | 14,968 psi | 69% | 1119 fps | 93.6% |
| Maxam CSB 2² | <<locked>> | 60% | 15,084 psi | 69% | 1158 fps | 98% |
| Maxam CSB 3² | <<locked>> | 60% | 17,042 psi | 78% | 1175 fps | 98.6% |
| ReloadSwiss RS 14*² | <<locked>> | 60% | 6,237 psi | 29% | 732 fps | 85.6% |
| ReloadSwiss RS 20*² | <<locked>> | 60% | 13,779 psi | 63% | 1125 fps | 86.5% |
| SNPE Vectan A0*² | <<locked>> | 60% | 14,852 psi | 68% | 1109 fps | 86% |
| SNPE Vectan BA9 1/2² | <<locked>> | 60% | 17,753 psi | 82% | 1204 fps | 95.6% |
| Somchem MS200*² | <<locked>> | 60% | 16,549 psi | 76% | 1171 fps | 89.5% |
| Vihtavuori N32C Tin Star² | 4.1 gr | 60% | 9,863 psi | 45% | 915 fps | 99.8% |
| Vihtavuori N330² | <<locked>> | 60% | 17,187 psi | 79% | 1220 fps | 96.7% |
| Vihtavuori N340*² | <<locked>> | 60% | 15,635 psi | 72% | 1152 fps | 87.5% |
| Winchester AutoComp *² | <<locked>> | 60% | 15,403 psi | 71% | 1138 fps | 92.4% |
Recommended = one of the top powders for this cartridge and bullet combination.
* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.
² fill rate low - you might want to consider using a filler to ensure proper ignition.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 19 powders for .38 Special loaded with the .355 | 84gr | Inceptor RNP. ReloadSwiss RS 20 delivers the highest muzzle velocity at 1,302 fps; across all powders the maximum-charge window runs from 1,007 fps to 1,302 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 5 of the 19 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (150 MPa), the top charges use 55–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N32C Tin Star, Hodgdon TrailBoss rank at the top here: for .38 Special with the .355 | 84gr | Inceptor RNP they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Alliant Herco, Alliant UNIQUE, ReloadSwiss RS 20 burn incompletely and react more sensitively to barrel length and temperature. Alliant Herco, Baschieri & Pellagri 102 Pistol, Hodgdon Clays stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.