Load data for .38 Short Colt + .355 | 65gr | Inceptor RNP

.38 Short Colt cartridge drawing
Inceptor logo

Load Specifications

Bullet Manufacturer:Inceptor
Bullet Weight:65 gr
Bullet Diameter:0.355"
Bullet Length:<<locked>>
Case Length (l3):0.755"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:11 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:3"
Max. allowed Pressure:13,053 psi

Load data in caliber .38 Short Colt with .355 | 65gr | Inceptor RNP bullet and 3 powders. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 3"

PowderChargeFRMaxP%V(0)z
Alliant RED DOT*²<<locked>>72%11,531 psi88%915 fps86.6%
Hodgdon Clays*²<<locked>>68%11,487 psi88%866 fps93.9%
Maxam CSB 5*²<<locked>>64%11,110 psi85%909 fps90.1%

Start Load - Barrel Length: 3"

PowderChargeFRMaxP%V(0)z
Alliant RED DOT*²<<locked>>68%10,747 psi82%886 fps85.2%
Hodgdon Clays*²<<locked>>60%9,906 psi76%810 fps91.5%
Maxam CSB 5*²<<locked>>60%9,631 psi74%850 fps87.3%

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

<<locked>> you need an access license to unlock this data.

This overview compares 3 powders for .38 Short Colt loaded with the .355 | 65gr | Inceptor RNP. Alliant RED DOT delivers the highest muzzle velocity at 915 fps; across all powders the maximum-charge window runs from 866 fps to 915 fps. Alliant RED DOT gives the best case fill at 72 %, and 0 of the 3 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (90 MPa), the top charges use 85–88 %, leaving at least 12 % headroom. As outliers, Alliant RED DOT, Hodgdon Clays, Maxam CSB 5 burn incompletely and react more sensitively to barrel length and temperature. Alliant RED DOT, Hodgdon Clays, Maxam CSB 5 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data