
Load Specifications
Load data in caliber .38 Long Colt with .355 | 97gr | MEN QD2 bullet and 6 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N32C Tin Star.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 4"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Alliant BE-86*² | <<locked>> | 64% | 11,052 psi | 85% | 850 fps | 88.9% |
| Baschieri & Pellagri 102 Pistol* | <<locked>> | 80% | 11,632 psi | 89% | 876 fps | 94.4% |
| Hodgdon TrailBoss*ᴾ | <<locked>> | 100% | 7,948 psi | 61% | 722 fps | 92.4% |
| Maxam CSB 2*² | <<locked>> | 68% | 10,602 psi | 81% | 879 fps | 91.6% |
| Vihtavuori N32C Tin Star | <<locked>> | 88% | 10,965 psi | 84% | 840 fps | 99.8% |
| Vihtavuori N330*² | <<locked>> | 64% | 11,531 psi | 88% | 886 fps | 87.7% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 4"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Alliant BE-86*² | <<locked>> | 60% | 9,892 psi | 76% | 810 fps | 86.7% |
| Baschieri & Pellagri 102 Pistol*² | <<locked>> | 64% | 7,600 psi | 58% | 728 fps | 86.4% |
| Hodgdon TrailBoss* | <<locked>> | 80% | 5,845 psi | 45% | 627 fps | 86.6% |
| Maxam CSB 2*² | <<locked>> | 60% | 8,383 psi | 64% | 794 fps | 86.7% |
| Vihtavuori N32C Tin Star*² | 2.2 gr | 60% | 5,903 psi | 45% | 646 fps | 92.6% |
| Vihtavuori N330*² | <<locked>> | 60% | 10,283 psi | 79% | 840 fps | 85.1% |
Recommended = one of the top powders for this cartridge and bullet combination.
* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.
² fill rate low - you might want to consider using a filler to ensure proper ignition.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 6 powders for .38 Long Colt loaded with the .355 | 97gr | MEN QD2. Vihtavuori N330 delivers the highest muzzle velocity at 886 fps; across all powders the maximum-charge window runs from 722 fps to 886 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 3 of the 6 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (90 MPa), the top charges use 61–89 %, leaving at least 11 % headroom. Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N32C Tin Star rank at the top here: for .38 Long Colt with the .355 | 97gr | MEN QD2 they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Alliant BE-86, Baschieri & Pellagri 102 Pistol, Hodgdon TrailBoss burn incompletely and react more sensitively to barrel length and temperature. Alliant BE-86, Baschieri & Pellagri 102 Pistol, Hodgdon TrailBoss stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.