Load data for .38 Long Colt + .355 | 90gr | MEN QD1

.38 Long Colt cartridge drawing
MEN logo

Load Specifications

Bullet Manufacturer:MEN
Bullet Weight:90 gr
Bullet Diameter:0.355"
Bullet Length:<<locked>>
Case Length (l3):1.035"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:17.3 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:4"
Max. allowed Pressure:13,053 psi

Load data in caliber .38 Long Colt with .355 | 90gr | MEN QD1 bullet and 5 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N32C Tin Star.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
Alliant BE-86*²<<locked>>64%11,618 psi89%922 fps89.4%
Baschieri & Pellagri 102 Pistol*²<<locked>>76%10,950 psi84%909 fps93.2%
Hodgdon TrailBoss*ᴾ<<locked>>100%8,412 psi64%787 fps93.1%
Maxam CSB 2*²<<locked>>68%11,516 psi88%965 fps92.6%
Vihtavuori N32C Tin Star<<locked>>84%10,718 psi82%883 fps99.6%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
Alliant BE-86*²<<locked>>60%10,559 psi81%886 fps87.6%
Baschieri & Pellagri 102 Pistol*²<<locked>>64%7,847 psi60%784 fps86.8%
Hodgdon TrailBoss*<<locked>>80%6,077 psi47%679 fps87%
Maxam CSB 2*²<<locked>>60%8,818 psi68%860 fps87.3%
Vihtavuori N32C Tin Star*²2.5 gr60%6,135 psi47%699 fps93%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 5 powders for .38 Long Colt loaded with the .355 | 90gr | MEN QD1. Maxam CSB 2 delivers the highest muzzle velocity at 965 fps; across all powders the maximum-charge window runs from 787 fps to 965 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 2 of the 5 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (90 MPa), the top charges use 64–89 %, leaving at least 11 % headroom. Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N32C Tin Star rank at the top here: for .38 Long Colt with the .355 | 90gr | MEN QD1 they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Alliant BE-86, Baschieri & Pellagri 102 Pistol, Hodgdon TrailBoss burn incompletely and react more sensitively to barrel length and temperature. Alliant BE-86, Baschieri & Pellagri 102 Pistol, Hodgdon TrailBoss stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data