Load data for .375 Raptor + .375 | 275gr | CutEdge DGBR-HP

.375 Raptor cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:275 gr
Bullet Diameter:0.375"
Bullet Length:<<locked>>
Case Length (l3):1.865"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:60 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:22"
Max. allowed Pressure:58,015 psi
Recommended Twist Rate:1:6.0

Load data in caliber .375 Raptor with .375 | 275gr | CutEdge DGBR-HP bullet and 46 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are SNPE Vectan SP 10, ADI AR 2219 and Shooters World AR Plus.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 22"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>88%49,603 psi86%2096 fps100%
Accurate 2015ᴾ<<locked>>100%45,020 psi78%2116 fps99.7%
Accurate 2460ᴾ<<locked>>100%49,966 psi86%2198 fps98.5%
Accurate 2495ᴾ<<locked>>100%32,547 psi56%2005 fps98.2%
Accurate 2520ᴾ<<locked>>100%43,120 psi74%2146 fps96.9%
Accurate LT-30<<locked>>94%50,502 psi87%2103 fps99.4%
Accurate LT-32<<locked>>94%51,039 psi88%2110 fps98.2%
ADI AR 2205<<locked>>82%52,460 psi90%2014 fps100%
ADI AR 2207<<locked>>94%52,141 psi90%2165 fps100%
ADI AR 2219<<locked>>96%50,720 psi87%2218 fps99.4%
Alliant AR-Compᴾ<<locked>>100%41,466 psi71%2136 fps100%
Alliant Power Pro 1200-Rᴾ<<locked>>100%50,546 psi87%2274 fps96%
Alliant Reloder-10xᴾ<<locked>>100%52,054 psi90%2208 fps100%
Alliant Reloder-7<<locked>>92%51,024 psi88%2142 fps100%
Baschieri & Pellagri 106<<locked>>96%51,169 psi88%2133 fps99.6%
Hodgdon Benchmarkᴾ<<locked>>100%48,559 psi84%2129 fps96.7%
Hodgdon H322ᴾ<<locked>>100%51,909 psi89%2234 fps99.5%
Hodgdon H335<<locked>>98%49,327 psi85%2208 fps98.6%
Hodgdon H4198<<locked>>92%52,388 psi90%2136 fps99.3%
Hodgdon TrailBossᴾ<<locked>>100%31,401 psi54%1260 fps100%
IMR 3031ᴾ<<locked>>100%39,523 psi68%2116 fps98.5%
IMR 4198<<locked>>98%51,271 psi88%2152 fps100%
IMR 4227<<locked>>86%49,850 psi86%2073 fps100%
Lovex D073.4<<locked>>94%51,358 psi89%2215 fps98.2%
Lovex D073.5ᴾ<<locked>>100%50,328 psi87%2201 fps97.4%
Lovex S053<<locked>>88%51,140 psi88%2064 fps100%
Norma 200<<locked>>96%52,112 psi90%2195 fps100%
Norma 202ᴾ<<locked>>100%39,958 psi69%2083 fps96.9%
ReloadSwiss RS 14ᴾ<<locked>>100%30,864 psi53%1286 fps100%
ReloadSwiss RS 36<<locked>>88%52,025 psi90%2133 fps100%
ReloadSwiss RS 40ᴾ<<locked>>100%51,561 psi89%2211 fps98%
Rottweil R 901ᴾ<<locked>>100%44,019 psi76%2110 fps97.6%
Shooters World AR Plus<<locked>>94%51,358 psi89%2215 fps98.2%
SNPE Vectan BA6 1/2<<locked>>92%51,982 psi90%1946 fps100%
SNPE Vectan SP 10<<locked>>96%50,633 psi87%2218 fps98.7%
SNPE Vectan SP 3<<locked>>98%50,488 psi87%2182 fps99.8%
SNPE Vectan Tubal 3000ᴾ<<locked>>100%44,382 psi77%2057 fps97.6%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%35,375 psi61%1939 fps96.4%
Somchem S321ᴾ<<locked>>100%48,414 psi83%2198 fps96.4%
Somchem S335ᴾ<<locked>>100%42,308 psi73%2057 fps98.1%
Vihtavuori N110<<locked>>82%50,256 psi87%1982 fps100%
Vihtavuori N120<<locked>>94%52,315 psi90%2126 fps100%
Vihtavuori N130ᴾ<<locked>>100%50,082 psi86%2136 fps100%
Vihtavuori N133ᴾ<<locked>>100%43,366 psi75%2064 fps99.4%
Vihtavuori N135ᴾ<<locked>>100%35,418 psi61%2021 fps98.6%
Vihtavuori N140ᴾ<<locked>>100%38,334 psi66%2031 fps96.7%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 22"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%38,072 psi66%1942 fps99.4%
Accurate 2015<<locked>>82%25,425 psi44%1778 fps95%
Accurate 2460<<locked>>90%35,360 psi61%1991 fps95.3%
Accurate 2495<<locked>>92%24,642 psi42%1844 fps95.4%
Accurate 2520<<locked>>96%37,159 psi64%2057 fps95.4%
Accurate LT-30<<locked>>80%32,982 psi57%1844 fps96.1%
Accurate LT-32<<locked>>84%37,565 psi65%1916 fps95.2%
ADI AR 2205<<locked>>80%49,443 psi85%1985 fps100%
ADI AR 2207<<locked>>80%33,794 psi58%1923 fps100%
ADI AR 221936.3 gr82%31,647 psi55%1923 fps95.3%
Alliant AR-Comp<<locked>>80%22,234 psi38%1739 fps95.7%
Alliant Power Pro 1200-R<<locked>>98%47,601 psi82%2234 fps95.4%
Alliant Reloder-10x<<locked>>80%27,891 psi48%1837 fps97.4%
Alliant Reloder-7<<locked>>80%35,186 psi61%1923 fps99.4%
Baschieri & Pellagri 106<<locked>>80%30,821 psi53%1831 fps95.6%
Hodgdon Benchmark<<locked>>96%43,004 psi74%2054 fps95.4%
Hodgdon H322<<locked>>84%30,937 psi53%1906 fps95%
Hodgdon H335<<locked>>88%35,578 psi61%2001 fps95.5%
Hodgdon H4198<<locked>>80%36,448 psi63%1909 fps96.5%
Hodgdon TrailBoss<<locked>>80%23,003 psi40%1125 fps100%
IMR 3031<<locked>>90%28,921 psi50%1913 fps95.1%
IMR 4198<<locked>>80%30,589 psi53%1844 fps98.8%
IMR 4227<<locked>>80%41,408 psi71%1965 fps100%
Lovex D073.4<<locked>>86%38,783 psi67%2044 fps95.6%
Lovex D073.5<<locked>>94%40,495 psi70%2070 fps95.3%
Lovex S053<<locked>>80%40,538 psi70%1936 fps100%
Norma 200<<locked>>80%31,415 psi54%1900 fps98.9%
Norma 202<<locked>>96%35,186 psi61%2005 fps95.6%
ReloadSwiss RS 14<<locked>>80%22,669 psi39%1148 fps100%
ReloadSwiss RS 36<<locked>>80%40,727 psi70%1995 fps100%
ReloadSwiss RS 40<<locked>>92%39,769 psi69%2051 fps95.6%
Rottweil R 901<<locked>>92%34,577 psi60%1959 fps95.1%
Shooters World AR Plus39.6 gr86%38,783 psi67%2044 fps95.6%
SNPE Vectan BA6 1/2<<locked>>80%37,927 psi65%1788 fps100%
SNPE Vectan SP 1039.4 gr86%36,187 psi62%2008 fps95.7%
SNPE Vectan SP 3<<locked>>80%28,950 psi50%1841 fps95.4%
SNPE Vectan Tubal 3000<<locked>>92%34,447 psi59%1906 fps95%
SNPE Vectan Tubal 5000<<locked>>96%31,430 psi54%1867 fps95.1%
Somchem S321<<locked>>98%45,252 psi78%2156 fps95.7%
Somchem S335<<locked>>90%31,169 psi54%1873 fps95.1%
Vihtavuori N110<<locked>>80%47,500 psi82%1952 fps100%
Vihtavuori N120<<locked>>80%34,055 psi59%1896 fps100%
Vihtavuori N130<<locked>>80%27,224 psi47%1778 fps96.7%
Vihtavuori N133<<locked>>84%26,745 psi46%1775 fps95.2%
Vihtavuori N135<<locked>>90%25,962 psi45%1827 fps95.2%
Vihtavuori N140<<locked>>96%33,866 psi58%1955 fps95.3%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 46 powders for .375 Raptor loaded with the .375 | 275gr | CutEdge DGBR-HP. Alliant Power Pro 1200-R delivers the highest muzzle velocity at 2,274 fps; across all powders the maximum-charge window runs from 1,260 fps to 2,274 fps. Accurate 2015 gives the best case fill at 100 %, and 46 of the 46 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (400 MPa), the top charges use 53–90 %, leaving at least 10 % headroom. The 275.0 gr projectile in 0.375" calls for a 1:6.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2460, Accurate 2495 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. SNPE Vectan SP 10, ADI AR 2219, Shooters World AR Plus rank at the top here: for .375 Raptor with the .375 | 275gr | CutEdge DGBR-HP they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data