
Load Specifications
Load data in caliber .356 Win. with .355 | 116gr | MEN FMJ RN bullet and 9 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N110, ADI AR 2205 and SNPE Vectan BA6 1/2.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 20"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate No. 11 FS | <<locked>> | 92% | 46,499 psi | 89% | 2894 fps | 96.3% |
| ADI AR 2205 | <<locked>> | 94% | 46,311 psi | 89% | 2808 fps | 98% |
| Hodgdon LilGun | <<locked>> | 88% | 45,759 psi | 88% | 2982 fps | 100% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 25,657 psi | 49% | 1778 fps | 100% |
| Lovex S040 | <<locked>> | 86% | 45,121 psi | 87% | 2815 fps | 99.9% |
| Lovex S053ᴾ | <<locked>> | 100% | 40,234 psi | 77% | 2802 fps | 96.8% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 24,903 psi | 48% | 1818 fps | 100% |
| SNPE Vectan BA6 1/2ᴾ | <<locked>> | 100% | 37,275 psi | 72% | 2664 fps | 100% |
| Vihtavuori N110 | <<locked>> | 98% | 45,150 psi | 87% | 2874 fps | 100% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 20"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate No. 11 FS | <<locked>> | 90% | 43,613 psi | 84% | 2838 fps | 95.6% |
| ADI AR 2205 | 31.4 gr | 84% | 34,476 psi | 66% | 2566 fps | 95% |
| Hodgdon LilGun | <<locked>> | 80% | 34,505 psi | 66% | 2762 fps | 99.7% |
| Hodgdon TrailBoss | <<locked>> | 80% | 18,681 psi | 36% | 1591 fps | 100% |
| Lovex S040 | <<locked>> | 80% | 37,768 psi | 73% | 2671 fps | 99.4% |
| Lovex S053 | <<locked>> | 96% | 35,940 psi | 69% | 2710 fps | 95.5% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 18,072 psi | 35% | 1624 fps | 100% |
| SNPE Vectan BA6 1/2 | 25.8 gr | 80% | 21,930 psi | 42% | 2257 fps | 97.2% |
| Vihtavuori N110 | 26.9 gr | 80% | 26,716 psi | 51% | 2461 fps | 97.4% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 9 powders for .356 Win. loaded with the .355 | 116gr | MEN FMJ RN. Hodgdon LilGun delivers the highest muzzle velocity at 2,982 fps; across all powders the maximum-charge window runs from 1,778 fps to 2,982 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 9 of the 9 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (359 MPa), the top charges use 48–89 %, leaving at least 11 % headroom. Hodgdon TrailBoss, Lovex S053, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N110, ADI AR 2205, SNPE Vectan BA6 1/2 rank at the top here: for .356 Win. with the .355 | 116gr | MEN FMJ RN they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.