Load data for .350 Mag. Rigby + .357 | 86gr | Inceptor ARX Prefered Defense

.350 Mag. Rigby cartridge drawing
Inceptor logo

Load Specifications

Bullet Manufacturer:Inceptor
Bullet Weight:86 gr
Bullet Diameter:0.357"
Bullet Length:<<locked>>
Case Length (l3):2.75"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:91.1 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:24"
Max. allowed Pressure:44,962 psi

Load data in caliber .350 Mag. Rigby with .357 | 86gr | Inceptor ARX Prefered Defense bullet and 8 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2207, Vihtavuori N120 and ReloadSwiss RS 14.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
ADI AR 2207<<locked>>90%38,537 psi86%3711 fps98%
Hodgdon TrailBossᴾ<<locked>>100%28,921 psi64%2552 fps100%
IMR 4227<<locked>>84%39,943 psi89%3652 fps97%
Lovex S053<<locked>>84%38,508 psi86%3619 fps99.2%
ReloadSwiss RS 14ᴾ<<locked>>100%28,326 psi63%2605 fps100%
ReloadSwiss RS 36<<locked>>84%39,001 psi87%3658 fps96.6%
SNPE Vectan BA6 1/2<<locked>>88%39,972 psi89%3520 fps100%
Vihtavuori N120<<locked>>90%38,740 psi86%3671 fps99%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
ADI AR 220759.4 gr84%31,386 psi70%3494 fps95.6%
Hodgdon TrailBoss<<locked>>80%20,900 psi46%2297 fps100%
IMR 4227<<locked>>80%35,041 psi78%3514 fps95.4%
Lovex S053<<locked>>80%33,997 psi76%3491 fps98.3%
ReloadSwiss RS 1420.8 gr80%20,407 psi45%2343 fps100%
ReloadSwiss RS 36<<locked>>82%36,593 psi81%3593 fps95.9%
SNPE Vectan BA6 1/2<<locked>>80%31,821 psi71%3317 fps100%
Vihtavuori N12056.6 gr80%27,760 psi62%3330 fps95.3%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 8 powders for .350 Mag. Rigby loaded with the .357 | 86gr | Inceptor ARX Prefered Defense. ADI AR 2207 delivers the highest muzzle velocity at 3,711 fps; across all powders the maximum-charge window runs from 2,552 fps to 3,711 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 8 of the 8 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (310 MPa), the top charges use 63–89 %, leaving at least 11 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2207, Vihtavuori N120, ReloadSwiss RS 14 rank at the top here: for .350 Mag. Rigby with the .357 | 86gr | Inceptor ARX Prefered Defense they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data