top of page

Load data for .350 Legend + .355 | 123gr | MEN FMJ RN

Recommended Powder(s):

.350 Legend + .355 | 123gr | MEN FMJ RN

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.355 | 123gr | MEN FMJ RN
Bullet Weight:
123gr | 8.0g
Bullet Diameter:
0.355" | 9.02mm
Bullet Length:
1.000" | 25.4mm
Caliber:
.350 Legend load data
Case Length (l3):
1.710" | 43.4mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.484" | 12.3mm
Shank Seated Depth:
0.484" | 12.3mm
Case Capacity:
36.8 Grains of Water | 2.39 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
54969 psi | 3790 bar
LID:
LID_B3794_C500
Last updated:
2025-01-01

Load data for 12 loads in caliber .350 Legend with .355 | 123gr | MEN FMJ RN bullet and 6 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service. 

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI APS 450
<<locked>>
83%
47877
87%
**34
100%
[ADI AR 2205]*
<<locked>>
97%
35795
65%
**75
91%
Hodgdon LilGun 👍
<<locked>>
96%
36753
67%
**25
99%
Lovex S040
<<locked>>
97%
43279
79%
**52
98%
SNPE Vectan BA6 1/2
<<locked>>
96%
22785
41%
**55
95%
Vihtavuori N110
<<locked>>
97%
28253
51%
**62
96%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI APS 450
<<locked>>
80%
45498
83%
**08
100%
[ADI AR 2205]*
<<locked>>
94%
32938
60%
**19
90%
[Hodgdon LilGun]*
<<locked>>
81%
21828
40%
**70
93%
[Lovex S040]*
<<locked>>
81%
27644
50%
**57
94%
[SNPE Vectan BA6 1/2]*
<<locked>>
84%
17172
31%
**65
90%
[Vihtavuori N110]*
<<locked>>
84%
19638
36%
**19
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page