Load data for .32 Win. Spec. + .323 | 200gr | MEN SP

.32 Win. Spec. cartridge drawing
MEN logo

Load Specifications

Bullet Manufacturer:MEN
Bullet Weight:200 gr
Bullet Diameter:0.323"
Bullet Length:<<locked>>
Case Length (l3):2.04"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:45 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:20"
Max. allowed Pressure:44,236 psi
Recommended Twist Rate:1:6.0

Load data in caliber .32 Win. Spec. with .323 | 200gr | MEN SP bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, IMR 3031 and Hodgdon H322.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 20"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>94%38,638 psi87%1991 fps98.5%
Accurate 2460<<locked>>92%39,392 psi89%2018 fps95.8%
Accurate 2495ᴾ<<locked>>100%34,447 psi78%1995 fps98%
Accurate LT-30<<locked>>84%38,087 psi86%1900 fps97%
ADI AR 2207<<locked>>84%39,755 psi90%1982 fps100%
ADI AR 2219<<locked>>88%39,943 psi90%2034 fps97.2%
Alliant AR-Comp<<locked>>96%37,826 psi86%2044 fps99.9%
Alliant Reloder-10x<<locked>>90%39,639 psi90%2014 fps99.4%
Alliant Reloder-7<<locked>>82%38,725 psi88%1946 fps99.5%
Baschieri & Pellagri 106<<locked>>86%38,276 psi87%1929 fps97.3%
Hodgdon H322<<locked>>90%38,798 psi88%2014 fps96.9%
Hodgdon H335<<locked>>90%39,247 psi89%2028 fps95.9%
Hodgdon H4198<<locked>>82%39,653 psi90%1929 fps96.8%
Hodgdon TrailBossᴾ<<locked>>100%31,807 psi72%1253 fps100%
IMR 3031<<locked>>98%38,319 psi87%2060 fps97.7%
IMR 4198<<locked>>88%39,595 psi90%1969 fps99.8%
Norma 200<<locked>>86%39,885 psi90%2001 fps99.8%
Norma 202<<locked>>98%39,146 psi88%2031 fps96%
ReloadSwiss RS 14ᴾ<<locked>>100%31,589 psi71%1283 fps100%
SNPE Vectan SP 3<<locked>>88%38,334 psi87%1982 fps97.8%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%36,651 psi83%1923 fps96.1%
Somchem S335<<locked>>96%38,972 psi88%1972 fps96.8%
Vihtavuori N120<<locked>>84%39,943 psi90%1952 fps100%
Vihtavuori N130<<locked>>90%38,363 psi87%1946 fps99%
Vihtavuori N133<<locked>>96%39,726 psi90%1978 fps98.5%
Vihtavuori N135ᴾ<<locked>>100%36,869 psi83%2008 fps98.3%
Vihtavuori N140ᴾ<<locked>>100%39,711 psi90%2018 fps96.4%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 20"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>84%28,500 psi64%1804 fps95.6%
Accurate 2460<<locked>>90%37,072 psi84%1978 fps95.1%
Accurate 2495<<locked>>92%26,411 psi60%1837 fps95.3%
Accurate LT-30<<locked>>80%33,837 psi76%1824 fps95.7%
ADI AR 2207<<locked>>80%35,070 psi79%1909 fps100%
ADI AR 2219<<locked>>84%35,114 psi79%1949 fps95.8%
Alliant AR-Comp24.5 gr80%23,322 psi53%1729 fps95.4%
Alliant Reloder-10x<<locked>>80%29,138 psi66%1824 fps97.1%
Alliant Reloder-7<<locked>>80%36,477 psi82%1909 fps99.2%
Baschieri & Pellagri 106<<locked>>80%31,807 psi72%1818 fps95.3%
Hodgdon H32227.2 gr86%34,127 psi77%1932 fps95.5%
Hodgdon H335<<locked>>88%36,709 psi83%1985 fps95.1%
Hodgdon H4198<<locked>>80%37,376 psi84%1893 fps96.2%
Hodgdon TrailBoss<<locked>>80%23,192 psi52%1112 fps100%
IMR 303128.2 gr92%32,082 psi73%1942 fps95.6%
IMR 4198<<locked>>80%31,444 psi71%1827 fps98.5%
Norma 200<<locked>>80%33,011 psi75%1890 fps98.8%
Norma 202<<locked>>96%36,506 psi83%1988 fps95.2%
ReloadSwiss RS 14<<locked>>80%23,163 psi52%1142 fps100%
SNPE Vectan SP 3<<locked>>80%30,066 psi68%1827 fps95.1%
SNPE Vectan Tubal 5000<<locked>>98%34,505 psi78%1886 fps95.4%
Somchem S335<<locked>>92%34,345 psi78%1893 fps95.5%
Vihtavuori N120<<locked>>80%35,288 psi80%1883 fps100%
Vihtavuori N130<<locked>>80%28,427 psi64%1768 fps96.5%
Vihtavuori N133<<locked>>86%29,602 psi67%1798 fps95.6%
Vihtavuori N135<<locked>>90%27,354 psi62%1821 fps95%
Vihtavuori N140<<locked>>98%37,130 psi84%1975 fps95.6%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .32 Win. Spec. loaded with the .323 | 200gr | MEN SP. IMR 3031 delivers the highest muzzle velocity at 2,060 fps; across all powders the maximum-charge window runs from 1,253 fps to 2,060 fps. Accurate 2495 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (305 MPa), the top charges use 71–90 %, leaving at least 10 % headroom. The 200.0 gr projectile in 0.323" calls for a 1:6.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, IMR 3031, Hodgdon H322 rank at the top here: for .32 Win. Spec. with the .323 | 200gr | MEN SP they combine a high case fill with complete burn and sit in the upper velocity band. Hodgdon TrailBoss stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data