Load data for .32 Short Colt + .309 | 73gr | Sellier & Bellot FMJ

.32 Short Colt cartridge drawing
Sellier & Bellot logo

Load Specifications

Bullet Manufacturer:Sellier & Bellot
Bullet Weight:73 gr
Bullet Diameter:0.309"
Bullet Length:<<locked>>
Case Length (l3):0.65"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:6.8 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:3"
Max. allowed Pressure:14,504 psi

Load data in caliber .32 Short Colt with .309 | 73gr | Sellier & Bellot FMJ bullet and 12 powders. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 3"

PowderChargeFRMaxP%V(0)z
Accurate Solo 1000*²<<locked>>72%12,720 psi88%732 fps88%
ADI APS 450²<<locked>>64%12,908 psi89%715 fps98.7%
ADI AS 30*²<<locked>>72%12,038 psi83%725 fps93.3%
Alliant Green Dot*²<<locked>>76%12,517 psi86%748 fps86.8%
Alliant RED DOT*²<<locked>>72%11,647 psi80%732 fps91.9%
Hodgdon Clays²<<locked>>72%12,111 psi84%699 fps97.9%
Maxam CSB 4*²<<locked>>72%11,966 psi83%741 fps87.5%
Maxam CSB 5²<<locked>>72%13,010 psi90%771 fps97.1%
ReloadSwiss RS 12*<<locked>>80%12,038 psi83%817 fps89%
Rottweil P 801*²<<locked>>72%12,879 psi89%817 fps93.7%
Vihtavuori N320*<<locked>>80%12,415 psi86%778 fps88.2%
Vihtavuori N32C Tin Star*ᴾ<<locked>>100%8,905 psi61%682 fps91.9%

Start Load - Barrel Length: 3"

PowderChargeFRMaxP%V(0)z
Accurate Solo 1000*²<<locked>>64%11,327 psi78%696 fps85.8%
ADI APS 450²<<locked>>60%11,298 psi78%679 fps97.5%
ADI AS 30*²<<locked>>60%9,398 psi65%650 fps88.9%
Alliant Green Dot*²<<locked>>72%12,517 psi86%748 fps86.8%
Alliant RED DOT*²<<locked>>60%9,065 psi63%653 fps87.2%
Hodgdon Clays*²<<locked>>60%9,311 psi64%623 fps94.6%
Maxam CSB 4*²<<locked>>68%10,660 psi74%705 fps85.2%
Maxam CSB 5*²<<locked>>60%10,109 psi70%692 fps93.4%
ReloadSwiss RS 12*²<<locked>>76%10,849 psi75%781 fps86.8%
Rottweil P 801*²<<locked>>60%8,282 psi57%679 fps85.3%
Vihtavuori N320*²<<locked>>72%11,110 psi77%738 fps85.8%
Vihtavuori N32C Tin Star*<<locked>>88%7,295 psi50%620 fps87.5%

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 12 powders for .32 Short Colt loaded with the .309 | 73gr | Sellier & Bellot FMJ. ReloadSwiss RS 12 delivers the highest muzzle velocity at 817 fps; across all powders the maximum-charge window runs from 682 fps to 817 fps. Vihtavuori N32C Tin Star gives the best case fill at 100 %, and 3 of the 12 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (100 MPa), the top charges use 61–90 %, leaving at least 10 % headroom. Vihtavuori N32C Tin Star reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. As outliers, Accurate Solo 1000, ADI AS 30, Alliant Green Dot burn incompletely and react more sensitively to barrel length and temperature. Accurate Solo 1000, ADI APS 450, ADI AS 30 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data