Load data for .32 Long Colt + .312 | 100gr | Hornady XTP

.32 Long Colt cartridge drawing
Hornady logo

Load Specifications

Bullet Manufacturer:Hornady
Bullet Weight:100 gr
Bullet Diameter:0.312"
Bullet Length:<<locked>>
Case Length (l3):0.916"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:12.3 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:3.5"
Max. allowed Pressure:14,504 psi

Load data in caliber .32 Long Colt with .312 | 100gr | Hornady XTP bullet and 10 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N32C Tin Star.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 3.5"

PowderChargeFRMaxP%V(0)z
Accurate Solo 1250*²<<locked>>64%12,821 psi88%722 fps91.1%
Alliant BE-86*²<<locked>>64%12,647 psi87%728 fps94%
Baschieri & Pellagri 102 Pistol²<<locked>>76%11,400 psi79%702 fps96.5%
Hodgdon TrailBossᴾ<<locked>>100%8,673 psi60%604 fps96.2%
Maxam CSB 1*²<<locked>>64%12,357 psi85%709 fps90.6%
Maxam CSB 2²<<locked>>68%13,024 psi90%771 fps97.2%
ReloadSwiss RS 14*ᴾ<<locked>>100%8,195 psi56%600 fps90.8%
Vihtavuori N32C Tin Star<<locked>>88%12,908 psi89%712 fps100%
Vihtavuori N330*²<<locked>>64%12,865 psi89%755 fps93.1%
Winchester AutoComp *²<<locked>>64%12,618 psi87%725 fps89.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 3.5"

PowderChargeFRMaxP%V(0)z
Accurate Solo 1250*²<<locked>>60%11,748 psi81%696 fps89.6%
Alliant BE-86*²<<locked>>60%11,661 psi80%702 fps92.7%
Baschieri & Pellagri 102 Pistol*²<<locked>>60%7,556 psi52%591 fps89.9%
Hodgdon TrailBoss*²<<locked>>64%4,931 psi34%463 fps86.6%
Maxam CSB 1*²<<locked>>60%10,385 psi72%656 fps87.4%
Maxam CSB 2*²<<locked>>60%9,921 psi68%689 fps93.3%
ReloadSwiss RS 14*<<locked>>84%6,367 psi44%535 fps85.9%
Vihtavuori N32C Tin Star²1.5 gr60%6,672 psi46%548 fps97.1%
Vihtavuori N330*²<<locked>>60%11,806 psi81%728 fps91.6%
Winchester AutoComp *²<<locked>>60%10,863 psi75%679 fps86.5%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 10 powders for .32 Long Colt loaded with the .312 | 100gr | Hornady XTP. Maxam CSB 2 delivers the highest muzzle velocity at 771 fps; across all powders the maximum-charge window runs from 600 fps to 771 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 3 of the 10 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (100 MPa), the top charges use 56–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N32C Tin Star rank at the top here: for .32 Long Colt with the .312 | 100gr | Hornady XTP they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate Solo 1250, Alliant BE-86, Maxam CSB 1 burn incompletely and react more sensitively to barrel length and temperature. Accurate Solo 1250, Alliant BE-86, Baschieri & Pellagri 102 Pistol stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data