
Load Specifications
Load data in caliber .32 Long Colt with .309 | 73gr | Sellier & Bellot FMJ bullet and 7 powders. The key underlying parameters are shown in the table above.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 3.5"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Alliant BE-86*² | <<locked>> | 64% | 13,024 psi | 90% | 919 fps | 91.5% |
| Baschieri & Pellagri 102 Pistol² | <<locked>> | 76% | 12,473 psi | 86% | 909 fps | 95.1% |
| Hodgdon TrailBoss*ᴾ | <<locked>> | 100% | 9,253 psi | 64% | 778 fps | 94.5% |
| Maxam CSB 1*² | <<locked>> | 64% | 12,154 psi | 84% | 883 fps | 87.1% |
| Maxam CSB 2*² | <<locked>> | 68% | 13,053 psi | 90% | 958 fps | 94.3% |
| ReloadSwiss RS 14*ᴾ | <<locked>> | 100% | 8,470 psi | 58% | 761 fps | 87.8% |
| Vihtavuori N32C Tin Star | <<locked>> | 84% | 12,415 psi | 86% | 886 fps | 100% |
Start Load - Barrel Length: 3.5"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Alliant BE-86*² | <<locked>> | 60% | 11,661 psi | 80% | 879 fps | 89.5% |
| Baschieri & Pellagri 102 Pistol*² | <<locked>> | 60% | 7,803 psi | 54% | 741 fps | 86.6% |
| Hodgdon TrailBoss*² | <<locked>> | 72% | 5,787 psi | 40% | 627 fps | 86% |
| Maxam CSB 1*² | <<locked>> | 60% | 11,429 psi | 79% | 856 fps | 85.8% |
| Maxam CSB 2*² | <<locked>> | 60% | 10,051 psi | 69% | 860 fps | 89.6% |
| ReloadSwiss RS 14* | <<locked>> | 92% | 7,542 psi | 52% | 722 fps | 85.5% |
| Vihtavuori N32C Tin Star*² | <<locked>> | 60% | 6,773 psi | 47% | 692 fps | 94.5% |
* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.
² fill rate low - you might want to consider using a filler to ensure proper ignition.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 7 powders for .32 Long Colt loaded with the .309 | 73gr | Sellier & Bellot FMJ. Maxam CSB 2 delivers the highest muzzle velocity at 958 fps; across all powders the maximum-charge window runs from 761 fps to 958 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 3 of the 7 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (100 MPa), the top charges use 58–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. As outliers, Alliant BE-86, Hodgdon TrailBoss, Maxam CSB 1 burn incompletely and react more sensitively to barrel length and temperature. Alliant BE-86, Baschieri & Pellagri 102 Pistol, Hodgdon TrailBoss stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.