Load data for .32-40 Win. + .322 | 160gr | ACME RNFP Coated Black

.32-40 Win. cartridge drawing
ACME logo

Load Specifications

Bullet Manufacturer:ACME
Bullet Weight:160 gr
Bullet Diameter:0.322"
Bullet Length:<<locked>>
Case Length (l3):2.129"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:41 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:26"
Max. allowed Pressure:34,084 psi

Load data in caliber .32-40 Win. with .322 | 160gr | ACME RNFP Coated Black bullet and 6 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
ADI AR 2207<<locked>>86%29,182 psi86%2119 fps98.8%
Alliant AR-Compᴾ<<locked>>100%29,675 psi87%2169 fps96%
Hodgdon TrailBossᴾ<<locked>>100%28,442 psi83%1388 fps100%
Norma 200<<locked>>90%29,762 psi87%2146 fps96.4%
ReloadSwiss RS 14ᴾ<<locked>>100%27,731 psi81%1421 fps100%
Vihtavuori N120<<locked>>86%29,675 psi87%2096 fps99.5%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
ADI AR 2207<<locked>>80%24,163 psi71%1995 fps97.2%
Alliant AR-Comp<<locked>>98%28,094 psi82%2126 fps95.2%
Hodgdon TrailBoss7.8 gr80%20,349 psi60%1234 fps100%
Norma 200<<locked>>88%27,746 psi81%2100 fps95.6%
ReloadSwiss RS 148 gr80%19,957 psi59%1266 fps100%
Vihtavuori N120<<locked>>80%24,598 psi72%1978 fps98.3%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 6 powders for .32-40 Win. loaded with the .322 | 160gr | ACME RNFP Coated Black. Alliant AR-Comp delivers the highest muzzle velocity at 2,169 fps; across all powders the maximum-charge window runs from 1,388 fps to 2,169 fps. Alliant AR-Comp gives the best case fill at 100 %, and 6 of the 6 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (235 MPa), the top charges use 81–87 %, leaving at least 13 % headroom. Alliant AR-Comp, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for .32-40 Win. with the .322 | 160gr | ACME RNFP Coated Black they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data