Load data for .308 Win. + .308 | 88gr | Inceptor SRR

.308 Win. cartridge drawing
Inceptor logo

Load Specifications

Bullet Manufacturer:Inceptor
Bullet Weight:88 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.014"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:56 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:60,191 psi
Recommended Twist Rate:1:11.5

Load data in caliber .308 Win. with .308 | 88gr | Inceptor SRR bullet and 25 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 36, Alliant Reloder-7 and ADI AR 2207.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>94%53,156 psi88%3376 fps98.8%
Accurate LT-30ᴾ<<locked>>100%53,098 psi88%3360 fps96.5%
Accurate No. 11 FS<<locked>>82%51,401 psi85%3346 fps100%
ADI AR 2205<<locked>>86%52,431 psi87%3271 fps100%
ADI AR 2207ᴾ<<locked>>100%53,664 psi89%3497 fps100%
Alliant AR-Compᴾ<<locked>>100%35,346 psi59%3169 fps96%
Alliant Reloder-10xᴾ<<locked>>100%44,135 psi73%3340 fps97.5%
Alliant Reloder-7<<locked>>98%53,156 psi88%3442 fps99.2%
Baschieri & Pellagri 106ᴾ<<locked>>100%51,343 psi85%3333 fps96.5%
Hodgdon TrailBossᴾ<<locked>>100%29,501 psi49%2106 fps100%
IMR 4198ᴾ<<locked>>100%47,079 psi78%3346 fps98.7%
IMR 4227<<locked>>92%51,880 psi86%3376 fps99.9%
Lovex D060<<locked>>86%52,707 psi88%3432 fps99.2%
Lovex D063<<locked>>82%52,330 psi87%3396 fps99.3%
Lovex S053<<locked>>94%52,808 psi88%3376 fps100%
Norma 200ᴾ<<locked>>100%50,299 psi84%3448 fps99.1%
ReloadSwiss RS 14ᴾ<<locked>>100%28,935 psi48%2152 fps100%
ReloadSwiss RS 36<<locked>>94%54,302 psi90%3458 fps99.9%
Shooters World Blackout<<locked>>82%52,330 psi87%3396 fps99.3%
Shooters World Buffalo Rifle<<locked>>86%52,707 psi88%3432 fps99.2%
Shooters World SOCOM<<locked>>86%54,085 psi90%3392 fps99.7%
SNPE Vectan BA6 1/2<<locked>>98%53,388 psi89%3212 fps100%
Vihtavuori N110<<locked>>88%52,199 psi87%3291 fps100%
Vihtavuori N120ᴾ<<locked>>100%53,824 psi89%3445 fps100%
Vihtavuori N130ᴾ<<locked>>100%42,975 psi71%3232 fps96.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>84%37,768 psi63%3064 fps95.6%
Accurate LT-30<<locked>>96%46,789 psi78%3241 fps95%
Accurate No. 11 FS<<locked>>80%48,283 psi80%3291 fps100%
ADI AR 2205<<locked>>80%43,627 psi72%3114 fps100%
ADI AR 220734.4 gr80%28,094 psi47%2913 fps96.3%
Alliant AR-Comp<<locked>>98%33,141 psi55%3104 fps95%
Alliant Reloder-10x<<locked>>94%36,361 psi60%3159 fps95.3%
Alliant Reloder-737.4 gr84%34,055 psi57%3028 fps95%
Baschieri & Pellagri 106<<locked>>96%44,875 psi75%3212 fps95%
Hodgdon TrailBoss<<locked>>80%21,393 psi36%1886 fps100%
IMR 4198<<locked>>90%35,201 psi58%3068 fps95.7%
IMR 4227<<locked>>80%35,810 psi59%3035 fps97.5%
Lovex D060<<locked>>80%43,903 psi73%3248 fps97.9%
Lovex D063<<locked>>80%49,066 psi82%3333 fps98.9%
Lovex S053<<locked>>80%34,751 psi58%3009 fps99.5%
Norma 200<<locked>>88%33,852 psi56%3081 fps95.4%
ReloadSwiss RS 14<<locked>>80%20,885 psi35%1926 fps100%
ReloadSwiss RS 3635.8 gr80%34,780 psi58%3048 fps97.1%
Shooters World Blackout<<locked>>80%49,066 psi82%3333 fps98.9%
Shooters World Buffalo Rifle<<locked>>80%43,903 psi73%3248 fps97.9%
Shooters World SOCOM<<locked>>80%43,961 psi73%3205 fps98.6%
SNPE Vectan BA6 1/2<<locked>>80%32,634 psi54%2831 fps100%
Vihtavuori N110<<locked>>80%40,872 psi68%3094 fps100%
Vihtavuori N120<<locked>>80%28,398 psi47%2890 fps97.7%
Vihtavuori N130<<locked>>96%37,695 psi63%3114 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 38 powders for .308 Win. loaded with the .308 | 88gr | Inceptor SRR. ADI AR 2207 delivers the highest muzzle velocity at 3,497 fps; across all powders the maximum-charge window runs from 2,106 fps to 3,497 fps. Accurate 2015 gives the best case fill at 100 %, and 38 of the 38 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (415 MPa), the top charges use 48–90 %, leaving at least 10 % headroom. The 88.0 gr projectile in 0.308" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2460, Accurate LT-30 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 36, Alliant Reloder-7, ADI AR 2207 rank at the top here: for .308 Win. with the .308 | 88gr | Inceptor SRR they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 2015, Accurate 2460, Accurate LT-32 burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data