Load data for .308 Marlin Express + .311 | 123gr | Sellier & Bellot FMJ

.308 Marlin Express cartridge drawing
Sellier & Bellot logo

Load Specifications

Bullet Manufacturer:Sellier & Bellot
Bullet Weight:123 gr
Bullet Diameter:0.311"
Bullet Length:<<locked>>
Case Length (l3):1.91"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:51 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:47,862 psi

Load data in caliber .308 Marlin Express with .311 | 123gr | Sellier & Bellot FMJ bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, Alliant Reloder-10x and ADI AR 2219.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>82%41,916 psi88%2680 fps99.1%
Accurate 2015<<locked>>96%41,133 psi86%2753 fps98.3%
Accurate 2495ᴾ<<locked>>100%34,708 psi73%2700 fps97.2%
Accurate LT-30<<locked>>88%43,033 psi90%2690 fps97.3%
ADI AR 2207<<locked>>86%42,076 psi88%2756 fps100%
ADI AR 2219<<locked>>90%42,772 psi89%2818 fps97%
Alliant AR-Compᴾ<<locked>>100%43,294 psi90%2884 fps100%
Alliant Reloder-10x<<locked>>92%42,003 psi88%2789 fps99.2%
Alliant Reloder-7<<locked>>84%41,017 psi86%2703 fps99.3%
Baschieri & Pellagri 106<<locked>>88%40,988 psi86%2671 fps97.1%
Hodgdon H322<<locked>>92%41,510 psi87%2792 fps96.7%
Hodgdon H4198<<locked>>84%42,105 psi88%2687 fps96.4%
Hodgdon TrailBossᴾ<<locked>>100%31,502 psi66%1759 fps100%
IMR 3031ᴾ<<locked>>100%40,886 psi85%2844 fps97.5%
IMR 4198<<locked>>90%41,756 psi87%2736 fps99.7%
Norma 200<<locked>>88%42,119 psi88%2776 fps99.6%
Norma 202ᴾ<<locked>>100%41,553 psi87%2799 fps95.7%
ReloadSwiss RS 14ᴾ<<locked>>100%31,386 psi66%1801 fps100%
SNPE Vectan BA6 1/2<<locked>>84%42,873 psi90%2520 fps100%
SNPE Vectan SP 10<<locked>>90%42,975 psi90%2818 fps95.9%
SNPE Vectan SP 3<<locked>>92%43,018 psi90%2792 fps98%
SNPE Vectan Tubal 3000<<locked>>98%43,192 psi90%2726 fps95.9%
Somchem S335<<locked>>98%41,365 psi86%2720 fps96.5%
Vihtavuori N120<<locked>>86%42,221 psi88%2713 fps100%
Vihtavuori N130<<locked>>94%43,047 psi90%2743 fps99.2%
Vihtavuori N133<<locked>>98%42,206 psi88%2736 fps98.3%
Vihtavuori N135ᴾ<<locked>>100%37,014 psi77%2723 fps97.6%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%39,392 psi82%2631 fps98.7%
Accurate 2015<<locked>>86%30,226 psi63%2503 fps95%
Accurate 2495<<locked>>96%30,342 psi63%2595 fps95.7%
Accurate LT-30<<locked>>82%35,911 psi75%2543 fps95.3%
ADI AR 2207<<locked>>80%34,664 psi72%2608 fps99.9%
ADI AR 221936.9 gr86%37,521 psi78%2707 fps95.5%
Alliant AR-Comp33.7 gr84%26,165 psi55%2451 fps95.7%
Alliant Reloder-10x31.3 gr80%28,921 psi60%2484 fps95.9%
Alliant Reloder-7<<locked>>80%36,289 psi76%2605 fps98.6%
Baschieri & Pellagri 106<<locked>>84%36,056 psi75%2569 fps95.7%
Hodgdon H322<<locked>>88%36,405 psi76%2680 fps95.1%
Hodgdon H4198<<locked>>80%37,202 psi78%2582 fps95%
Hodgdon TrailBoss<<locked>>80%23,134 psi48%1572 fps100%
IMR 3031<<locked>>94%34,011 psi71%2684 fps95.2%
IMR 4198<<locked>>80%31,328 psi65%2497 fps97.6%
Norma 200<<locked>>80%32,793 psi69%2572 fps98%
Norma 202<<locked>>98%39,088 psi82%2749 fps95%
ReloadSwiss RS 14<<locked>>80%22,916 psi48%1604 fps100%
SNPE Vectan BA6 1/2<<locked>>80%38,682 psi81%2451 fps100%
SNPE Vectan SP 10<<locked>>88%40,176 psi84%2759 fps95.1%
SNPE Vectan SP 3<<locked>>84%33,736 psi70%2589 fps95.3%
SNPE Vectan Tubal 3000<<locked>>96%40,495 psi85%2674 fps95.1%
Somchem S335<<locked>>94%36,724 psi77%2625 fps95.2%
Vihtavuori N120<<locked>>80%34,882 psi73%2572 fps100%
Vihtavuori N130<<locked>>80%28,152 psi59%2402 fps95.1%
Vihtavuori N133<<locked>>88%31,328 psi65%2493 fps95.2%
Vihtavuori N135<<locked>>94%30,705 psi64%2569 fps95.3%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .308 Marlin Express loaded with the .311 | 123gr | Sellier & Bellot FMJ. Alliant AR-Comp delivers the highest muzzle velocity at 2,884 fps; across all powders the maximum-charge window runs from 1,759 fps to 2,884 fps. Accurate 2495 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (330 MPa), the top charges use 66–90 %, leaving at least 10 % headroom. Accurate 2495, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, Alliant Reloder-10x, ADI AR 2219 rank at the top here: for .308 Marlin Express with the .311 | 123gr | Sellier & Bellot FMJ they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data