Load data for .308 Marlin Express + .308 | 135gr | CutEdge ER Raptor

.308 Marlin Express cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:135 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):1.91"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:51 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:47,862 psi
Recommended Twist Rate:1:10.0

Load data in caliber .308 Marlin Express with .308 | 135gr | CutEdge ER Raptor bullet and 25 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-10x, Norma 200 and ADI AR 2207.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>84%40,422 psi84%2470 fps98.7%
Accurate 2015ᴾ<<locked>>100%41,147 psi86%2572 fps98.2%
Accurate LT-30<<locked>>90%41,698 psi87%2477 fps96.7%
ADI AR 2207<<locked>>90%42,569 psi89%2582 fps100%
ADI AR 2219<<locked>>92%41,075 psi86%2592 fps96.4%
Alliant AR-Compᴾ<<locked>>100%38,334 psi80%2595 fps99.5%
Alliant Reloder-10x<<locked>>96%42,337 psi88%2612 fps99.2%
Alliant Reloder-7<<locked>>88%41,684 psi87%2533 fps99.4%
Baschieri & Pellagri 106<<locked>>92%42,192 psi88%2513 fps97.2%
Hodgdon H322<<locked>>96%42,250 psi88%2615 fps96.7%
Hodgdon H4198<<locked>>86%40,741 psi85%2470 fps95.8%
Hodgdon TrailBossᴾ<<locked>>100%30,618 psi64%1598 fps100%
IMR 4198<<locked>>94%42,830 psi89%2566 fps99.7%
IMR 4227<<locked>>82%41,263 psi86%2470 fps99.9%
Lovex S053<<locked>>84%42,554 psi89%2477 fps100%
Norma 200<<locked>>92%42,279 psi88%2595 fps99.6%
ReloadSwiss RS 14ᴾ<<locked>>100%30,095 psi63%1634 fps100%
ReloadSwiss RS 36<<locked>>84%42,714 psi89%2539 fps100%
SNPE Vectan BA6 1/2<<locked>>86%41,742 psi87%2326 fps100%
SNPE Vectan SP 3<<locked>>94%41,176 psi86%2569 fps97.4%
Somchem S335ᴾ<<locked>>100%39,131 psi82%2497 fps95.7%
Vihtavuori N120<<locked>>90%42,815 psi89%2543 fps100%
Vihtavuori N130<<locked>>96%41,133 psi86%2526 fps98.8%
Vihtavuori N133ᴾ<<locked>>100%40,074 psi84%2510 fps97.7%
Vihtavuori N135ᴾ<<locked>>100%32,416 psi68%2441 fps95.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%35,650 psi74%2379 fps97.8%
Accurate 2015<<locked>>92%31,879 psi67%2385 fps95.7%
Accurate LT-30<<locked>>86%36,767 psi77%2382 fps95.4%
ADI AR 220726.6 gr80%31,024 psi65%2356 fps99.5%
ADI AR 2219<<locked>>90%38,174 psi80%2536 fps95.5%
Alliant AR-Comp<<locked>>88%26,179 psi55%2293 fps95.6%
Alliant Reloder-10x27.5 gr82%27,151 psi57%2280 fps95.1%
Alliant Reloder-7<<locked>>80%32,547 psi68%2349 fps97.6%
Baschieri & Pellagri 106<<locked>>86%34,693 psi72%2369 fps95.1%
Hodgdon H322<<locked>>92%37,159 psi78%2513 fps95.1%
Hodgdon H4198<<locked>>84%38,247 psi80%2421 fps95.1%
Hodgdon TrailBoss<<locked>>80%22,350 psi47%1427 fps100%
IMR 4198<<locked>>80%28,398 psi59%2251 fps96.4%
IMR 4227<<locked>>80%38,624 psi81%2425 fps99.8%
Lovex S053<<locked>>80%37,724 psi79%2395 fps100%
Norma 20027.8 gr80%28,572 psi60%2306 fps96.6%
ReloadSwiss RS 14<<locked>>80%22,060 psi46%1460 fps100%
ReloadSwiss RS 36<<locked>>80%37,913 psi79%2451 fps99.7%
SNPE Vectan BA6 1/2<<locked>>80%35,244 psi74%2221 fps100%
SNPE Vectan SP 3<<locked>>88%34,229 psi72%2425 fps95.4%
Somchem S335<<locked>>98%36,782 psi77%2454 fps95%
Vihtavuori N120<<locked>>80%31,328 psi65%2329 fps99.9%
Vihtavuori N130<<locked>>84%28,210 psi59%2251 fps95.1%
Vihtavuori N133<<locked>>92%31,459 psi66%2329 fps95%
Vihtavuori N135<<locked>>98%30,385 psi63%2392 fps95%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 25 powders for .308 Marlin Express loaded with the .308 | 135gr | CutEdge ER Raptor. Hodgdon H322 delivers the highest muzzle velocity at 2,615 fps; across all powders the maximum-charge window runs from 1,598 fps to 2,615 fps. Accurate 2015 gives the best case fill at 100 %, and 25 of the 25 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (330 MPa), the top charges use 63–89 %, leaving at least 11 % headroom. The 135.0 gr projectile in 0.308" calls for a 1:10.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-10x, Norma 200, ADI AR 2207 rank at the top here: for .308 Marlin Express with the .308 | 135gr | CutEdge ER Raptor they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data